Hitachi DH 24PC3 User manual

ELECTRIC TOOL PARTS LIST
LIST NO. E489
ROTARY HAMMER
Model DH 24PC3
2005
•
5
•
20
(E1)
Hitachi Power Tools
1234
5
6
7
8
9
10
11
12
13
15
16
17
18
19
20
21
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
61
66
67
68 69
71
73
74
75
76
77
75
78
80
81
82
86
84
85
14
22
44
45
46
70
72
501
502
503
79
83

*ALTERNATIVE PARTS--- 2 ---
ITEM
NO. CODE NO. DESCRIPTION REMARKS
NO.
USED
PARTS
5 -- 05
DH 24PC3
1306-345 FRONT CAP 1
2306-340 STOPPER RING 1
3324-527 GRIP 1
4324-528 BALL HOLDER 1
5324-526 HOLDER PLATE 1
6322-812 HOLDER SPRING 1
7984-118 WASHER (B) 1
8939-547
RETAINING RING FOR D20 SHAFT (10 PCS.) 1
9301-654 TAPPING SCREW (W/FLANGE) D5X35 4
10 324-605 GEAR COVER ASS’Y 1 INCLUD. 47
11 NAME PLATE 1
12 307-688 OIL SEAL 1
13 322-815 SLEEVE 1
14 323-232 FELT PACKING (B) 1
15 690-4DD BALL BEARING 6904DDPS2L 1
16 324-522 SLEEVE (A) 1
17 322-813 RETAINING RING 37MM 1
18 324-530 PUSHING BUTTON 1
19 317-223 PUSHING SPRING 1
20 878-885 O-RING (S-18) 1
21 324-603 CHANGE LEVER 1
22 317-238 SPRING (B) 2
23 959-156 STEEL BALL D7.0 (10 PCS.) 1
24 323-184 CYLINDER 1
25 323-185 SECOND GEAR 1
26 317-233 SPRING (A) 1
27 317-234 WASHER (A) 1
28 317-235 RETAINING RING D30 1
29 324-525 SECOND HAMMER 1
30 944-486 O-RING (1AP-20) 1
31 324-523 HAMMER HOLDER 1
32 322-802 O-RING (B) 1
33 322-805 DAMPER (A) 1
34 322-808 O-RING (C) 1
35 324-524 DAMPER HOLDER 1
36 322-807 STOPPER RING 1
37 324-535 STRIKER 1
38 322-834 O-RING (I.D. 16) 1
39 324-534 PISTON 1
40 322-793 O-RING (I.D. 66.5) 1
41 324-542 INNER COVER ASS’Y 1 INCLUD. 44-46
42 322-798 PISTON PIN 1
43 322-799 WASHER (C) 2
44 324-543 FELT PACKING (A) 1
45 324-545 VALVE 1
46 324-544 FELT PACKING (B) 1
47 323-249 PINION SLEEVE 1
48 318-522 LOCK PLATE 1
49 323-181 SECOND PINION 1
50 323-182 CLUTCH SPRING 1
51 324-606 CLUTCH 1

*ALTERNATIVE PARTS --- 3 ---
ITEM
NO. CODE NO. DESCRIPTION REMARKS
NO.
USED
PARTS
5 -- 05
DH 24PC3
52 323-180 SECOND SHAFT 1
53 324-533 RECIPROCATING BEARING 1
54 322-797 FIRST GEAR 1
55 322-795 SPACER 1
56 626-VVM BALL BEARING 626VVC2PS2L 1
57 322-816 FELT PACKING 1
58 876-796 O-RING (P-22) 1
59 322-818 PACKING WASHER 1
60 608-DDM BALL BEARING 608DDC2PS2L 1
61 982-631 WASHER (A) 2
*62 360-720U ARMATURE ASS’Y 110V-120V 1 INCLUD. 60, 61, 66
*62 360-720E ARMATURE 220V-230V 1
*62 360-720F ARMATURE 240V 1
63 324-531 FAN GUIDE 1
64 961-672 HEX. HD. TAPPING SCREW D4X50 2
*65 340-635C STATOR 110V-120V 1
*65 340-635E STATOR 220V-230V 1
*65 340-635F STATOR 240V 1
66 608-VVM BALL BEARING 608VVC2PS2L 1
67 324-604 HITACHI PLATE 1
68 324-553 HOUSING 1
*69 324-549 CHOKE COIL (A) BROWN 1 EXCEPT FOR USA, CAN, GBR (110V),
INA, IND, SYR, KUW, SIN, HKG
*69 324-550 CHOKE COIL (A) BROWN 1 FOR GBR (110V)
70 324-536 SWITCH (1P PILLAR TYPE) 1
71 322-853 PUSHING BUTTON 1
*72 324-551 CHOKE COIL (A) BLUE 1 EXCEPT FOR USA, CAN, GBR (110V),
INA, IND, SYR, KUW, SIN, HKG
*72 324-552 CHOKE COIL (A) BLUE 1 FOR GBR (110V)
*73 324-538 INTERNAL WIRE (A) (BLUE) 1
FOR USA, CAN, INA, IND, SYR, KUW, SIN, HKG
74 999-041 CARBON BRUSH (1 PAIR) 1
75 955-203 BRUSH HOLDER 2
*76 324-537 INTERNAL WIRE (A) (BROWN) 1
FOR USA, CAN, INA, IND, SYR, KUW, SIN, HKG
77 999-072 CARBON BRUSH (AUTO STOP TYPE) (1 PAIR) 1
*78 994-273 NOISE SUPPRESSOR 1 EXCEPT FOR USA, CAN, INA, IND, SYR,
KUW, SIN, HKG
*79 981-373 TUBE (D) 2 FOR CORD
*80 953-327 CORD ARMOR D8.8 1
*80 938-051 CORD ARMOR D10.1 1
81 937-631 CORD CLIP 1
82 984-750 TAPPING SCREW (W/FLANGE) D4X16 2
83 LABEL (WEEE) 1
84 324-554 HANDLE COVER 1
85 301-653 TAPPING SCREW (W/FLANGE) D4X20 (BLACK) 3
*86 500-390Z CORD 1 (CORD ARMOR D8.8)
*86 500-446Z CORD 1 (CORD ARMOR D8.8) FOR GBR (230V)
*86 500-465Z CORD 1 (CORD ARMOR D8.8) FOR GBR (110V)
*86 500-235Z CORD 1 (CORD ARMOR D8.8) FOR INA
*86 500-245Z CORD 1 (CORD ARMOR D10.1) FOR SYR
*86 500-249Z CORD 1 (CORD ARMOR D8.8) FOR USA, CAN
*86 500-408Z CORD 1 (CORD ARMOR D8.8) FOR AUS, NZL

*ALTERNATIVE PARTS--- 4 ---
ITEM
NO. CODE NO. DESCRIPTION REMARKS
NO.
USED
PARTS
5 -- 05
DH 24PC3
*86500-424Z CORD 1 (CORD ARMOR D8.8) FOR KUW, SIN
*86500-456Z CORD 1 (CORD ARMOR D8.8) FOR CHN
*86500-440Z CORD 1 (CORD ARMOR D8.8) FOR HKG

OPTIONAL ACCESSORIES
ITEM
NO. CODE NO. DESCRIPTION REMARKS
NO.
USED
*ALTERNATIVE PARTS --- 5 ---5 -- 05
STANDARD ACCESSORIES
ITEM
NO. CODE NO. DESCRIPTION REMARKS
NO.
USED
DH 24PC3
501 324-555 CASE 1
502 324-548 SIDE HANDLE 1
*503 303-709 DEPTH GAUGE 1
* 503 310-331 DEPTH GAUGE 2 FOR USA, CAN
601 981-840
GREASE (A) FOR HAMMER. HAMMER DRILL (30G) 1
602 308-471 GREASE FOR HAMMER. HAMMER DRILL (70G) 1
603 980-927
GREASE FOR HAMMER. HAMMER DRILL (500G) 1
604 306-885 DUST COLLECTOR (B) ASS’Y 1 INCLUD. 605, 613
605 986-802 DUST COLLECTOR ASS’Y 1 INCLUD. 606-612
606 986-803 DUST COVER 1
607 986-804 SEAL COVER 1
608 948-310 RETAINING RING FOR D30 SHAFT 1
609 958-063 WASHER 1
610 959-150 STEEL BALL D6.35 (10 PCS.) 19
611 986-805 OUTER RACE 1
612 986-806 SOCKET 1
613 306-910 SOCKET ADAPTER (B) 1
614 971-787 DUST CUP 1
615 931-844 STOPPER 1
616 321-814 DRILL CHUCK 13VLRB-D 1 INCLUD. 617
617 995-344 FLAT HD. SCREW (A) (LEFT HAND) M6X25 1
618 321-813 DRILL CHUCK 13VLD-D 1
619 971-511Z + DRIVER BIT (A) NO. 2 25L 1
620 971-512Z + DRIVER BIT (A) NO. 3 25L 1
621 944-477 COTTER 1
622 982-684
CENTER PIN (A) 109L FOR CORE BIT D32-38 1
623 982-685
CENTER PIN (B) 104L FOR CORE BIT D45-90 1
624 982-672 CORE BIT (A) 25MM 1
625 982-673 CORE BIT (A) 29MM 1
626 982-674 CORE BIT (A) 32MM 1 INCLUD. 627
627 982-686 GUIDE PLATE (FOR CORE BIT 32MM) 1
628 982-675 CORE BIT (A) 35MM 1 INCLUD. 629
629 982-687 GUIDE PLATE (FOR CORE BIT 35MM) 1
630 982-676 CORE BIT (A) 38MM 1 INCLUD. 631
631 982-688 GUIDE PLATE (FOR CORE BIT 38MM) 1
632 982-677 CORE BIT (B) 45MM 1 INCLUD.633
633 982-689 GUIDE PLATE (FOR CORE BIT 45MM) 1
634 982-678 CORE BIT (B) 50MM 1 INCLUD.635
635 982-690 GUIDE PLATE (FOR CORE BIT 50MM) 1
636 971-794
ANCHOR SETTING ADAPTER A W1/4” (MANUAL) 1
637 971-795
ANCHOR SETTING ADAPTER A W5/16” (MANUAL) 1
638 971-796
ANCHOR SETTING ADAPTER A W3/8” (MANUAL) 1
639 971-797
ANCHOR SETTING ADAPTER A W1/2” (MANUAL) 1
640 971-798
ANCHOR SETTING ADAPTER A W5/8” (MANUAL) 1
641 971-799
ANCHOR SETTING ADAPTER B W1/4” (MANUAL) 1

*ALTERNATIVE PARTS--- 6 ---
ITEM
NO. CODE NO. DESCRIPTION REMARKS
NO.
USED
5 -- 05
DH 24PC3
OPTIONAL ACCESSORIES
Printed in Japan
(050520N)
642 971-800 ANCHOR SETTING ADAPTER B W5/16” (MANUAL) 1
643 971-801
ANCHOR SETTING ADAPTER B W3/8” (MANUAL) 1
644 971-802
ANCHOR SETTING ADAPTER B W1/2” (MANUAL) 1
645 971-803
ANCHOR SETTING ADAPTER B W5/8” (MANUAL) 1
646 944-460 TAPER SHANK DRILL BIT D11X100 1
647 944-461 TAPER SHANK DRILL BIT D12.3X110 1
648 993-038 TAPER SHANK DRILL BIT D12.7X110 1
649 944-462 TAPER SHANK DRILL BIT D14.3X110 1
650 944-500 TAPER SHANK DRILL BIT D14.5X110 1
651 944-463 TAPER SHANK DRILL BIT D17.5X120 1
652 944-464 TAPER SHANK DRILL BIT D21.5X140 1
653 320-859 SYRINGE (BLOW-OUT BULB TYPE) 1
654 303-046
BULL POINT (SDS+) 250MM (ROUND SHANK TYPE) 1
655 303-044
CHEMICAL ANCHOR ADAPTER (SDS+) 12.7MMX90L 1
656 303-045
CHEMICAL ANCHOR ADAPTER (SDS+) 19.0MMX100L 1
657 303-334 CHUCK HANDLE 1
658 302-976 ANCHOR SETTING ADAPTER A (SDS+) W1/4X260L 1
659 930-515 CHUCK WRENCH 10G 1
660 302-975 ANCHOR SETTING ADAPTER A (SDS+) W5/16X260L 1
661 303-621
ANCHOR SETTING ADAPTER A (SDS+) W3/8X160L 1
662 302-974
ANCHOR SETTING ADAPTER A (SDS+) W3/8X260L 1
663 302-979
ANCHOR SETTING ADAPTER B (SDS+) W1/4X260L 1
664 302-978
ANCHOR SETTING ADAPTER B (SDS+) W5/16X260L 1
665 303-622
ANCHOR SETTING ADAPTER B (SDS+) W3/8X160L 1
666 302-977
ANCHOR SETTING ADAPTER B (SDS+) W3/8X260L 1
667 303-332 HAMMER DRILL CHUCK SET 13MM 1 INCLUD. 668, 669
668 303-334 CHUCK HANDLE 1
669 303-335 RUBBER CAP 1
670 303-617
TAPER SHANK ADAPTER (SDS PLUS) NO. 1 1
671 303-618
TAPER SHANK ADAPTER (SDS PLUS) NO. 2 1
672 303-619 A-TAPER SHANK ADAPTER (SDS PLUS) 1
673 303-620 B-TAPER SHANK ADAPTER (SDS PLUS) 1
674 981-122 SPECIAL SCREW M6X22 1
675 303-625 CORE BIT SHANK (SDS PLUS) 25-38MM 105L 1
676 303-626
CORE BIT SHANK (SDS PLUS) 25-38MM 300L 1
677 303-627
CORE BIT SHANK (SDS PLUS) 45-90MM 300L 1
678 303-624 CHUCK ADAPTER (D) (SDS PLUS) 1
679 321-825 DRILL CHUCK AND ADAPTER SET 1 INCLUD. 680
680 303-623 CHUCK ADAPTER (G) (SDS PLUS) 1
681 306-369 DRILL BIT (SLENDER SHAFT) D3.4X90 1
682 306-368 DRILL BIT (SLENDER SHAFT) D3.5X90 1
683 306-370 ADAPTER FOR SLENDER SHAFT (SDS PLUS) 1