Hitachi KP-F500GV User manual

MODEL KP-F500GV
KP-F500GV
Specifications
Prod. Code - Order No.
STORED DATE
DESIGNED DATE
CHECKED DATE
APPROVED DATE
REV.
2
1
3
4
TOLERANCE
SCALE
UNIT F
E
D
C
B
A
SHEET
1
9
DWG.
No.
TITLE
DF022-4PE-T1
2
1
3
4
F
E
D
C
B
A
Gigabit Ethernet
Progressive scan CCD camera
KP-F500GV
Specifications (Preliminary) Ver.1.00
1. General
The KP-F500GV is single CCD type camera which utilized the progressive scan CCD image
sensor with square pixel for VGA format of 2/3-inch.
By adoption of Gigabit Ethernet interface, high-speed connection of maximum of 1 Gbps can be
possible. Moreover, by using hub or switcher, construction of multiple camera system can be
easily performed.
2. Outstanding features
(1) High resolution
The 2/3-inch 5,050,000 pixels square lattice progressive scan CCD achieve a high resolution of
2456(H) x 2058(V).
(2) Gigabit Ethernet interface
High-speed serial interface Gigabit Ethernet is supported and direct connection is possible to
PC by the diameter cable of thin as compared with parallel output. It is possible to 100m.
(3) GigE Vision (Ver 1.00) correspondence
Based on Industrial camera interface standard GigE Vision, a maximum of 1Gbps high speed
data transmit is available and suitable for image processing.
(4) GENiCAM (Ver. 1.00) correspondence
Development of camera control system is easy because industrial camera control API
"GENiCAM" lead EMVA (European Machine Vision Association).
(5) PoE correspondence
Power supply can be input via Ethernet cable (Power over Ethernet).
(6) Remote control
- Multi-step electronic shutter (from 1/16 to 1/50000 second in 8 steps)
- Variable shutter (from 10 to 1/100000 second)
- The image capture at desired timing using the external trigger signal
and other various functions are set by remote control via a Gigabit Ethernet cable.
-May.31,2008
(first edition)
SYMBOL
DATE DESCRIPTION (DRAWN)
DESIGNED
0
0

SHEET
2
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
3. Specifications
(1) Imaging device 2/3-inch progressive scan interline CCD
Total pixels 2536 (H) x 2068 (V)
Effective pixels 2456 (H) x 2058 (V)
Pixel size 3.45 um (H) x 3.45 um (V) (square lattice)
(2) Scanning area 8.47 mm (H) x 7.10 mm (V)
(3) Scanning system Progressive
(4) Aspect ratio 5 : 4
(5) Frame rate 16 frames per second (full pixel readout)
(6) Sync system Internal / external
(7) Lens mount C mount
(8) Flange focal distance 17.526 mm
(9) Video output
Interface Gigabit Ethernet
Protocol GigE Vision compliant
Transfer 1 Gbit per second
Image format Mono 8/10/12bit
Maximum image size 2448 (H) x 2050 (V)
Frame rate 16 frame per second
*Frame rate is different for following format
Mono 10/12bit: 11 frame per second
(10) Sensitivity 400lx, F5.6, 3200K
(11) Minimum illumination 1 lx (F1.4 GAIN MAX)
(12) Electric shutter OFF / Auto (AES) / Manual (PRESET or VARIABLE)
OFF is normal exposure (frame rate)
PRESET 1/16, 1/60, 1/100, 1/250, 1/1000, 1/2000,
1/10000, 1/50000 second.
VARIABLE 10 to 1/100000 second
(13) External trigger shutter
Mode Fixed shutter
One trigger
VD Sync
Reset control
Input Via Gigabit Ethernet cable (Software trigger)
12-pin connector (dware trigger)
Input level 24Vp-p +/- 1V
Threshold 3.7V +/- 0.5V (Low --> High)
3.5V +/- 0.5V (High --> Low)
Input polarity High / Low adjustable
Input delay Adjustable

SHEET
3
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
(14) External sync signal
VD output 5Vp-p +/- 0.3V
Strobe out 5Vp-p +/- 0.3V
Output Polarity High / Low adjustable
Strobe delay Adjustable
Strobe duration Adjustable
(15) Partial scan Selectable start position and width of picture grabbing in 1H step.
(16) ALC (Auto level control) Adjustable for video level
(17) Gain Auto / Manual (0dB to 18db)
(18) Gamma OFF (γ=1) / ON
(19) V-Binning OFF / ON
(20) Sharpness Adjustable
(21) Black level Adjustable
(22) Knee Adjustable (Knee point and Knee slope)
(23) Power supply voltage DC+12V +/- 1V (input from 12-pin connector)
48V (PoE)
(24) Current consumption Approx. 6.0W (DC+12V)
(25) Ambient
Performance 0 to +40℃(+32 to +104 F), less than 90 % RH
Operation -10 to +50℃(+14 to 122 F), less than 90 % RH
Storage -20 to +60℃(-4 to 140 F), less than 70 % RH (without dew condensation)
(26) Vibration endurance 68.65 m/s2or less (10 to 200Hz, 30 minutes each on XYZ axes)
(Do not subject to strong vibration for long periods of time.)
(27) Shock endurance 490.3 m/s2 or less (vertical, horizontal, once each face)
(28) External dimensions 44(W) x 29(H) x 72(D) mm (not including lens and protrusions)
(29) Mass Approx. 140g

SHEET
4
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
4. Composition
(1) Camera (with IR cut filter)
(2) CD-ROM (Operation manual, Control software and SDK)
(3) Composition table
5. Optional accessories
(1) Dummy glass (AR coated) ARC1214
(2) IR cut filter IRC650
(3) Junction box JU-F30,
(4) Tripod adaptor TA-M1
(5) 12pin plug HR10A-10P-12S(01)
(6) Camera cable
Molded type Shield type
2 m C-201KSM C-201KSS
5 m C-501KSM C-501KSS
10 m C-102KSM C-102KSS
In the CE Marking region, use the shield type and install clamp filter
（ZCAT2035-0930A: TDK）at both ends of the cable.
(7) LAN cable (Commercial item) CAT5E Straight cable
CAT5E Cross cable
CAT6 Straight cable
CAT6 Cross cable

SHEET
5
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
6. Specification of Digital output connector
(1) Gigabit Ethernet connector
PIN NO.
Signal
1 TRP1+
2 TPR1-
3 TRP2+
4 TPR3+
5 TRP3-
6 TRP2-
7 TRP4+
8 TRP4-
Connector: RJ-45
*LED Status
STATUS LED1(Green) LED2 (Yellow)
Power ON Light Off Light On
Transmission Blink On Light On
Transmission pause Light Off Light On
(2) 12-pin connector
PIN NO.
Signal PIN NO.
Signal
1 GND (+12V) 7 TRIG-A / VD (H)
2 +12V 8 TRIG-B (C)
3 GND 9 TRIG-B (H)
4 AUX 10 FLASH / VD OUT
5 GND 11 N.C.
6 N.C. 12 TRIG-A / VD (C)
Connector (camera side) : SAMWOO SNH-10-12 (RPCB) or equivalent
Plug (matching cable plug) : Hirose HR10A-10P-12S (01) or equivalent
Please do not unplug and insert cable (camera cable) with a power supplied to a camera.
Install clamp filter (ZCAT 2035-0930A: TDK) at both ends (camera and video processor
ends) in the CE marking legion.
Please do not connect 1 pin and 3/5 pin when using PoE. When connecting it, PoE may stop
the power supply. Because TRIG-A/VD and TRIG-B are photo coupler input, 8/12 pin is
isolated with 1/3/5 pin. When 8/12 pin is connected to GND, please connect to 3 pin or 5 pin.
Note: Please do not input any signal to N.C. pin because machine may break down.
LED1 LED2

SHEET
6
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
9. Spectral response
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
400 500 600 700 800 900 1000
Wave Length (nm)
Relative Response
CCD
IR cut filter

SHEET
7
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
10. External view
ＰＬＡＴＥ ＲＡＴＥＤ
ＳＥＲ．ＮＯ．
ＤＣ ＩＮ/ＳＹＮＣ
Ｅｔｈｅｒｎｅｔ
Ｕ１
２６（φ２７.４）
７２.０
７７.２
６６.０８.７
２９
１４.５
４－Ｍ３（ＤＥＰＴＨ：３.５）
２５
２６
２１.２
６６.０８.７
２５
４－Ｍ２（ＤＥＰＴＨ：３.５）
４－Ｍ３（ＤＥＰＴＨ：３.５）
５.２
４４ （６.３）
ＣＯＬＯＲ：ＢＬＡＣＫ ＣＯＬＯＲ：ＢＬＡＣＫ
ＣＯＬＯＲ：ＢＬＡＣＫ
ＣＯＬＯＲ：ＢＬＡＣＫ
１３
ＳＥＥ ＭＡＮＵＡＬ
ＡＰＥＲＣＥＶＯＩＲ
ＭＡＮＵＥＬ
・ＭＡＳＳ： ＡＰＰＲＯＸ １４０ ｇ ・ＴＯＬＥＲＡＮＣＥ： ±０.５ ・ＵＮＩＴ： ｍｍ ・ＳＣＡＬＥ： ＮＴＳ

SHEET
8
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
Warranty and service:
(1) The guarantee period is one year after the data purchase.
However, the defects due to erroneous use or intentional act are excluded.
(2) As the defect after expiration of the guarantee period, where product repair is
possible, repair will be performed at charge.
(3) The present Warranty pertains only to the camera unit. Secondary malfunctions
attributable to camera failure as well as expenses incurred by disassembly and
reassembly of the related system, are beyond the scope of this Warranty.
(4) Compensation for loss of business, loss or damage to software, database and other
contingent losses are beyond the scope of this Warranty.
(5) Hitachi Kokusai Electric Inc. is not liable for the losses caused when the equipment
is used in a system, use for business trades, production process, medical fields,
crime prevention applications, etc.
(6) In the case of camera trouble by miss wiring of cable, it will be considered as out of
warranty.
RoHS Compliant
This product complies with the requirement of the RoHS(Restriction of
the use of Certain Hazardous Substances in Electrical
and Electronic
Equipment) Directive 2002/95/EC
Notice:
These specifications are subject to change without prior notice due to
product improvement.
Confirm the most recent specifications at time of order.
Hitachi Kokusai certifies this product complies with
the standard
warranty conditions of Hitachi Kokusai, and that quality control is
implemented to the extent required to comply with these conditions.

SHEET
9
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
Modification history
SIMBLE
DATE CORRECTION AND REASONS DESIGNED