
English - 9 -
To Switch the TV On
Standby Programme +/- or a
TV in.
Standby
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched into standby mode, the standby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
OK
OK
Store Mode
Home Mode
available in Settings>System>More
OK
Next
OK
About Selecting Broadcast Type
OK
OK
Digital Aerial: If D. Aerial
Digital Cable: If D. Cable
YesOK yNetwork
FrequencyNetwork ID and
Search Step No
OK y Start Frequency Stop
Frequency and Search Step
NextOK
Note: Searching duration will change depending on the
selected Search Step.
Satellite: If Satellite
be made.
Tivusat Option
Satellite
Tivusat
Install TypeOperator
Tivusat OperatorOK to
Note: If you want the channels to be sorted in the preset
order of Tivusat set the satellite as Hotbird at 13.0º East
(13.0E) after selecting your antenna type.
StandardInstall Type OK
Antenna Type
Antenna TypeDirectSingle Satellite Cable
or DiSEqC switch
OK
ContinueTransponder list
and
Direct:
OK to
OK
Single Satellite Cable:
OK
OK