FURNITUREBOX ALBA User manual

ALBA
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/alba
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
30 MINUTE
BUILD
MAXIMUM
CAPACITY 100Kg

Follow us on Instagram
@furniturebox_uk
STEP 1
Use a clean, at, soft surface to
avoid any bumps or scratches.
First, screw the adjustable
feet [E] into the underside of
base plate [4]. Ensure the feet
and base plate are level before
proceeding.
Next, connect the 2x legs [3] to
the base plate [4] using screws
[B] followed by washers [A] and
tightening with Allen key [C].
STEP 2
Attach the top
connecting plate [2]
to the top of the legs,
using 4 x washer [A]
followed 4 x screw [B].
Tighten with Allen key
[C]. Ensure everything
is connected without a
wobble before moving
onto the next stage.

www.furniturebox.co.uk
FULL ASSEMBLY INSTRUCTIONS
STEP 4
Carefully and with help,
ip your coffee table
onto its feet and check
for stability. Your coffee
table is now ready to
use.
STEP 3
Place tabletop [1] face
down on the clean, at, soft
surface and very carefully,
with help, ip the rest of
the coffee table you have
already constructed upside
down so the top connecting
plate [2] aligns with the
holes in the underside of the
tabletop [1]. Connect using
1 x washer [A] followed by
1 x screw [B] per hole and
tighten rmly with Allen key
[C]. Ensure the connecting
plate is securely fastened
to the tabletop to avoid
potential wobble later on.

www.furniturebox.co.uk
www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.