HiVi H5MKII User manual

Designed by HiVi Acoustics, Inc.
HiVi H5MKII
Multimedia Active Speaker Manual
TREBLEBASS INPUT / VOLUME
OFF
ON

1
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The lightning flash is intended to alert you to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to constitute an
electric shock to persons.
The exclamation point is intended to alert you to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the appliance.
Before connecting or using this apparatus, do read carefully all safety warning and
instructions. Please keep this instruction for future reference.
This device should be installed or set up in a position that ventilation can be assured.
Never put the device in a place that air flow over the ventilation openings might be
hindered, such as in a bookshelf or a drawer.
This product should be operated only from the type of power source indicated on the back
panel of the device. The power cord of this product should be restored in a place that is
less possibly be walked on or get pierced, especially its plug, convenience receptacles and
the point where power cord exit from the apparatus.
Before cleaning this product, make sure the plug is disconnected from the outlet.
Proceed with the cleaning in the way that this instruction recommends only.
When this product is not in use for a long time, make sure to unplug the power cord from
the AC outlet.
If below problem happens, send this product to a qualified service personnel for repairing.
A. Power cord or power plug is damaged.
B. Objects have fallen or liquid has been spilled into this product.
C. This product is exposed to rain or other liquid.
D. This product functions abnormally or very poorly.
E. This product has been dropped or has a damaged enclosure.
Never to attempt to repair this product by yourself. Refer all servicing to a qualified servicing
personnel.
CAUTION
To reduce the risk of electric shock, the power plug must be completely inserted into an AC
outlet.
This product does not contain any parts or components that can be repaired by users
themselves. Do not open the enclosure, otherwise it may result in an electric shock. Refer
all servicing to a qualified servicing personnel.
When you unplug this product from AC outlet, do hold the power plug and pull.
Do not pull the power cord. Do not overload AC outlets or the extension cord, as this can
lead to risk of fire or electric shock.
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
Warning

2
When repairing or replacement of parts is required, make sure the service technician has
used the parts/components specified by the manufacturer or parts/components that have
the same characteristics as the original parts/components. Unauthorized
substitutions may result in risk of fire, electric shock or other hazards.
POWER SOURCE
Before connecting this product with AC outlet, do check and make sure the electric supply
voltage is as same as it is marked on the rear panel of this product.
WARNING: It's very dangerous to insert a power plug that has bare wire into an AC
outlet.
DECLARATION
This product does not contain any parts or components that can be repaired by
users themselves. If there is any malfunction, refer to this instruction or ask for
repair by a qualified service technician. Do not try to repair by yourself, otherwise
the manufacturer will not be responsible for any consequences resulted there from.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
FCC Warning
Warning

9
10
11
12
5
7
8
6
1 2 3 4
TREBLEBASS INPUT / VOLUME
OFF
ON
3
Please make sure all the following components are in the box.
x 1
x 1
x 1
x 1
15
17
19
21
13
16
18
20
22
14
AUX1 AUX2
POWER MUTE
WiFi BT
OPT COAX
VOLUME
Design ed by Hi Vi Acou stic s, Inc.
HiVi H5MKII
Multi media Active Speaker Manual
TREBLEBASS INPUT / VOLUME
OFF
ON
Unpacking & Schematic Diagram
Manual

AUX2
L
R
L
R
AUX1
COAXI AL
LAN OPT ICA L
LEFT OUT
100-2 40V ~ 50/60Hz 0.96A 96 W
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
MADE IN CHINA
FCC ID: 2ANSM-HIVI
Multimedia Active Speaker
NO.1, South Dong cheng Road, Liangan g Industrial Zone, Zhuhai,
Guang dong, P.R.China
Power: 100-240V~ 50/60Hz 0.96A 96W
Zhuhai HiVi Technology co., Ltd.Designed by HiVi Acoustics, Inc.
Model: HiVi H5MKII
LEFT IN
23
24
25
29
4
Unpacking & Schematic Diagram
1. Bass Control: ±3dB; clockwise +3dB, counterclockwise -3dB
2. Treble Control: ±3dB; clockwise +3dB, counterclockwise -3dB
3. Input/Volume Control: Turn clockwise to increase the volume.
Press repeatedly to cycle through the available modes (AUX, Bluetooth, WiFi…)
4. Switch
5. Tweeter 6. Woofer
7. Receiver 8. Indicator Light
9. Power Cable 11. Dual RCA to 3.5mm Audio Cable
10. Optical Cable 12. Speaker Connecting Cable
23. LAN Interface 24. Optical Interface
25. Power Socket 26. AUX1/AUX2
27. Coaxial Interface 28. Speaker Out
29. Speaker In
13. Power
14. Mute (Red Light)
Press the “Mute” key on the remote control for 5 seconds. The indicator light flashes
red twice. After the beep, the device will resume to default setting.
15. AUX1 Input (Sky Blue Light) 16. AUX2 Input (Yellow Light)
17. WiFi Input (Green Light) 18. Bluetooth Input (Blue Light)
19. Optical Input (White Light) 20. Coaxial Input(Purple Light)
21. Volume Down 22. Volume Up
26
27
28

5
100-240V~ 50/60Hz
S Inpeaker
a
Slave Speaker
b
SPEAKER IN
a) Connection between speakers.
b) Speaker connection with power.
c) Speaker connection with computers, TV and tablets etc.
d) Speaker connection with router.
e) Optical connection with CD Player/DVD Player/TV.
Mobile Phone
Ipad
Computer
TV
c
AUX2
L
R
L
R
AUX1
COAXI AL
LAN OPT ICA L
LEFT OUT
100-2 40V ~ 50/60Hz 0.96A 96W
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
MADE IN CHINA
FCC ID: 2ANSM-HIVI
Multimedia Active Speaker
NO.1, South Dong cheng Road, Liangan g Industrial Zone, Zhuhai,
Guang dong, P.R.China
Power: 100-240V~ 50/60Hz 0.96A 96W
Zhuhai HiVi Technology co., Ltd.Designed by HiVi Acoustics, Inc.
Model: HiVi H5MKII
AUX2
L
R
L
R
AUX1
COAX IAL
LAN OP TICAL
LEFT O UT
100- 240V~ 5 0/60H z 0.96A 96 W
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
MADE IN CHINA FCC ID: 2ANSM-HIVI
Multimedia Active Speaker
NO.1 , Sout h Dongc heng R oad, Li angan g Indus trial Z one, Z huhai ,
Guan gdong , P.R.Chi na
Power: 100-240V~ 50/60Hz 0.96A 96W
Zhuhai HiVi Technology co., Ltd.Designed by HiVi Acoustics, Inc.
Model: HiVi H5MKII
Speaker Connection
Speaker Out
Master Speaker
Router
d
e
CD Player
DVD Player
TV

AUX1 AUX2
POWER MUTE
WiFi BT
OPT COAX
VOLUME
Bluebooth Connection
Plug the speaker to a network connection. Both stream and local music can be played when
connected.
Wired Connection
1
1) Open Settings app on your phone and select WiFi. Choose HiVi _ xxxx.
Enter password 12345678.
2) Connected.
3) Open music player and enjoy your music. Click icon and choose HiVi H5MKII_ xxxx.
When not connected to the Internet, the speaker still can play music via WiFi. But it's
only limited to the local music.
H5MKII
Select WiFi mode via the remote control or press Input/ control on the front panel.
Indicator light should flash green. When connected, the light should be steady.
Volume
00:37 04:37
iPhone
HiVi H5MKII_xxxx
Cancel
Setting WiFi
WiFi
CHOOSE A NETWORK...
Ask to Join Networks
Known networks will be joined automatically. If no known
networks are available, you will have to manually select a
network.
HiVi H5MKII_xxxx
Enter the password for "HiVi H5MKII_xxxx"
Enter Password
Cancel Join
Password
Setting WiFi
WiFi
HiVi H5MKII_xxxx
Other...
CHOOSE A NETWORK ...
Select mode via the remote control or press Input/ control on the front
panel. Indicator light should flash blue. Choose HiVi H5MKII.
Steady blue light indicates successful Bluetooth connection.
Bluebooth Volume
WiFi Connection
6
TREBLEBASS INPUT / VOLUME
OFF
ON
VOLUME
-+
WiFi BT
OPT COAX
INPUT / VOLUME

7
10.10.10.254 Cancel
10.10.10.254
Browser
WiFi
Known networks will be joined automatically. If no known
networks are available, you will have to manually select a
network.
WiFi 00:37 04:37
iPhone
HiVi H5MKII_xxxx
Cancel
1) Open Settings app on your phone and select WiFi. Choose HiVi H5MKII_ xxxx.
Enter password 12345678.
2) Connected.
3) Open browser and enter website 10.10.10.254.
4) Choose your home WiFi network and connect.
Note that no special characters are allowed in the password to your WiFi network.
5) Reopen Settings app. Choose HiVi H5MKII_ xxxx.
6) Connected.
Open music player and enjoy your music.
Click icon and choose HiVi H5MKII_ xxxx.
Setting
WiFi
CHOOSE A NETWORK...
Ask to Join Networks
HiVi H5MKII_xxxx
Enter the password for “H5MKII_xxxx"
Enter Password
Cancel Join
Password
Setting WiFi
WiFi
HiVi H5MKII_xxxx
Other...
CHOOSE A NETWORK ...
Setting
WiFi
HiVi H5MKII_xxxx
Other...
CHOOSE A NETWORK...
Setting Welcome
WLAN：network disconnected
XXXXX
Select A Wireless Network
XXXX 1X
XXXXX2
XXXXX3
XXXXX4
Message
Please input wireless password
cancel connect
Wireless Connection
2
WiFi Connection

8
Settings:
3
10.10.10.254 取消
10.10.10.254
Browser
Status System Network
Version Information
SSID：HiVi H5MKII_xxxx
Device Name：
Language:
Firmware Version:
Release Date:
UUID:
Wireless IP：
Ethernet IP：
en us_
release 3.5.3715.0
2017.06.02
192.168.0.120
0.0.0.0
WiFi Status
FF310013C4F8EBDEF99CEAA6
HiVi H5MKII_xxxx
Setting Welcome
WLAN：network disconnected
XXXXX
Select A Wireless Network
XXXX 1X
XXXXX2
XXXXX3
XXXXX4
Language
Restore Factory Settings
Firmware Update
Restore Factory Settings
Language
Restore Factory Settings
Firmware Update
Firmware Upgrade
no file selected
Browse
Apply
Online Update
Firmware Online Update
Status System Network
WiFi System Save
Language
Language
Firmware Update
English
Restore Factory Settings
English
中文
Deutsch
Español
français
Italiano
Status System Network
WiFi System Save
Status System Network
WiFi System Save
WiFi Connection
1) Open browser and enter website 10.10.10.254. Click “Setting”. Click “Status” to find
detailed information of this device.
2) Click “System” to change the system language, restore or upgrade the system.
Note: Do not disconnect your device until the update has finished. The device will restart
automatically after the update.
3) Click "Network", you can change password to the speakers or specify no password.
Device name can also be changed here.
Wireless Security
Password
Change device name
Open
Open
WPA PSK
Wireless Security
WPA PSK
Password
Change device name
Wireless Security
WPA PSK
Password
Change device name
Status System Network
WiFi System Save
Status System Network
WiFi System Save
Status System Network
WiFi System Save

9
HiVi H5MKII
2-way 4th-order vented box system
5.25" midbass driver ; 1" metal dome tweeter
56Hz - 20kHz ±3dB (Free Space)
65Hz - 20kHz ≤1% (2.83V/1m)
AUX1/2/WiFi/LAN/Bluetooth 4.0/Optical/CoaxialAUX
40W RMS Channel ; 80W RMS/Dual Channels/
Professional DSP 2.0 multimedia speaker system
2.5kHz
System Type
Frequency Range
Drivers Configuration
Rated Power
Series
Harmonic Distortion
Model
Audio Input
>90dB (Unweighted)
550mV
22kΩ
Baking finish with metal decorated baffles
3000mV
7.4"×9.1"×11.1"
Master Speaker:12.8 lbs Slave Speaker:11.5 lbs
>65dB
SNR
Input Sensitivity
Input Impedance
Finish
Dimensions(WXDXH)
Net Weight
Maximum Input
Separation
Crossover Point
Specifications
Master
speaker
Slave
speaker d>70cm
STAND / DESK WALL
Speaker Placement
d>30cm
TREBLEBASS INPUT / VOLUME
OFF
ON
±3dB
Bass Adjust
±3dB
Treble Adjust
60cm< <d 100cm

10
Trouble Shooting
1. If there is problem with sound quality.
a) Check if all the drivers are working.
b Check that audio cables are firmly connected at both ends.
2. If there is no sound from either of the speakers:
a Check if the device is on and if a source is playing.
b Check if the volume is not on minimum.
c Check if there is broken or short circuit with the cable connecting speakers and audio
source.
)
)
)
)
3. If there is no sound coming from one of the speakers:
a) Check the setting of the audio source.
b) Check that all the audio cable are firmly connected at both ends.
Break-in is the procedure which can enable the speakers to perform best acoustically. A
period ranging from 48-100 hours of usage is recommended before both the amplifier and
speaker drivers behave optimally.
Alternatively, you can listen 2 or 3 hours every day at a medium volume, and the speakers
will be broken-in one month or so.
a) Avoid magnetic disturbance.
b) Do not place under the sunshine for a long time.
c) Do not place in high temperature or moist environment for a long time.
d) Do not touch the drivers with your hands.
e) Avoid corrosive liquids and gases.
a) b) c)
Maintenance
Break-in
d) e)

HiVi USA
11630 Goldring Road, Arcadia, CA 91006, USA
E-mail: [e-mail] Fax:[phone] https://swanspeakers.com
HiVi China Zhuhai HiVi Technology co., Ltd.
NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, P.R.China
HiVi Acoustics, Inc.
Due to the reasons in the change of design or others, product information contained here may
not be in conformity with product itself. We reserve the right of no prior notice before change.