HKBN MX-PC-01 User manual

1
Smart Peephole DoorCam
(Model：MX-PC-01)
HKBN Home User Guide
v.20200702

2
Table of Contents
Product Description ............................................................................3
Product Installation.............................................................................4
Download HKBN Home App................................................................9
Add Device........................................................................................10
Control Device ..................................................................................15
Settings .............................................................................................22
FAQ ...................................................................................................30
Product Specifications.......................................................................33
Product Maintenance and Warranty ................................................34

3
Product Description
Name: Smart Peephole DoorCam
Model: MX-PC-01
LCD Screen × 1
Package Contents
Camera × 1
Bracket × 1
Bolts × 1
USB cable × 1
Outdoor Camera
Motion Detector
Camera
Doorbell Button
Indoor LCD Screen
SD Card slot
Micro USB
Reset Button
Preview Button
Power On/off
Speaker

4
Product Installation
•Applicable Door Thickness
Applicable door thickness: 35mm - 110mm
Applicable peephole: 14mm - 50mm
When choosing bolts to install the outdoor camera, you must know your
door’s thickness.
•For the door thickness between 35mm - 65mm, choose 35mm short bolts
•For the door thickness between 65mm - 95mm, choose 65mm long bolts
•For the door thickness above 95mm - 110mm, choose 80mm long bolts
Outside View
Inside View
Side View

5
Product Installation
•Installation Diagram
Self-adhesive
Strips
Outdoor Camera
Door
Bolts
Bracket
Indoor LCD Screen
Preview Button
Ribbon Cable

6
Product Installation
•Step-by-Step Tutorials
Select the bolts depending on the
door thickness, then screw them
to the outdoor camera.
Peel off the protective film off the
adhesive strips.
Pass the ribbon cable through
the door hole.
Tip: It will be easier to wrap the
ribbon cable in a paper tube first
then pass through.
Tighten the outdoor camera.
Notice: make sure the position is
correct before sticking it on the
door; the doorbell is on the
bottom side
1
.
2
.
3
.
4

7
Product Installation
•Step-by-Step Tutorials
Pass the cable through the
bracket indoor.
Notes: Don’t twist the ribbon
cable.
Attach the bolts through the
bracket after lightly tugging up
the ribbon cable.
Align and screw the bolts to the
brackets and fasten.
Prepare indoor LCD screen.
5
6
7
8

8
Product Installation
•Step-by-Step Tutorials
Slightly press the cable head into
the port as picture shown.
Suspend the LCD monitor on the
bracket from top to bottom.
Screw the bolt on the bottom to
fix the LCD screen.
Installation completed. Turn the
power button on under the LCD
display, then press the preview
button to turn it on.
9
10
12
11

9
Download HKBN Home App
OR
Scan the QR code below
Search and download “HKBN Home”
APP in Apple App Store OR Google
Play Store

10
Add Device
1. You must first connect your phone to a 2.4GHz Wi-Fi network when
adding device;
2. Tap “Devices” on the bottom menu (image 1);
3. Tap “Add Device” button OR “+” icon at top right corner if you already
have paired device (image 2);
(image 1)
(image 2)

11
Add Device
4. Tap “Smart Peephole DoorCam” from left menu “Smart Camera”
(image 3);
5. Hold the preview button on the LCD display for 5 seconds to enable QR
code scanning mode, and then tap “LCD Display is in Scanning Mode”
(image 4);
(image 3)
(image 4)

12
Add Device
6. Select Wi-Fi network and enter password*, and then tap “Next” (image
5);
7. Follow the instructions shown on screen. To scan the QR code by
peephole camera and keep it 15cm to 20cm away from the mobile
phone (image 6);
⚫Currently all smart devices are compatible to 2.4GHz network only. Please make sure
that your device and mobile are connected with 2.4GHz but not 5GHz Wi-Fi network.
⚫If you have 2.4GHz and 5GH Wi-Fi channel and they are using same SSID, we suggest
to edit it to different name before pairing. If you insist to use the same SSID on two
channels, please turn off the 5GHz channel first before pairing.
⚫
*Important tips: Wi-Fi requirement
(image 5)
(image 6)

13
Add Device
8. Scan the QR code by facing it to the peephole camera, you should then
hear a “Ding” sound from the LCD display. Click “I heard a prompt” if
you heard it (image 7);
9. The App will connect with your peephole camera, please allow few
minutes for it to pair (image 8);
(image 7)
(image 8)

14
Add Device
10. After device added successfully, you can change the device name and
assign it to the located room. (You can also change the device name
and room location later in device setting page and room management
page.) And you can find the Smart Peephole DoorCam in the “Device”
page.
Device
Name
Room
Selection

15
Control Device
•Main Control Panel
Time Watermark
Video Quality
Mute Button
Speak Button
Playback Video
Setting Page
Wi-Fi Signal Strength (%)
Full Screen Button
Battery Level
Take Video Button
Snapshot Button

16
Control Device
•Doorbell Ringing Notice
1. If there is visitor pressed the doorbell, your registered account for the
Smart Peephole DoorCam will send you a push notification*. Tap on
this message will bring you to the live view of camera in HKBN Home
App (*User need to enable and authorize push notification function in
Settings.);
2. If user is already in HKBN Home App, a pop-up message will notify you
someone pressed the doorbell. Tap “Accept” to go live view screen.

17
Control Device
•Speak function
1. Tap “Speak” button enable communication to the people from camera
side;
2. To end the conversation, tap “Speak” button again.

18
Control Device
•Record function
1. Tap “Record” button to start recording from the live streaming;
2. To end the recording tap the “Record” button again. (Recorded clips
will be saved to your mobile photo album; this clip will NOT be saved
in memory card.)

19
Control Device
•Snapshot function
1. Tap “Snapshot” button to take photo from the live streaming;
2. The photo will be saved to your mobile photo album (Photo will not
be saved to memory card). Tap “OK” to complete.

20
Control Device
•Playback function
1. In playback control panel, you can find all playback videos recorded
today.
2. If you would like to see recorded videos in the past, tap “Date” on the
top right corner and tap to select the available date.