OPERATING INSTRUCTIONS
1. Set the switch to the position “0”.
2. Ensure that the local supply corresponds with the rated voltage of the
product, before plugging it into wall outlet. Set the airflow by adjusting
the air-switch according to your needs.
3. Never leave the hair dryer unattended while it is switched on. Always
slide the switch to the position “0” and unplug the appliance after use.
4. Press Cool button, the temperature is a little warmer than air. Releasing
the button if you don't need this function.
5. Check the cord regularly. Do not use the appliance if the cord or the
plug has been damaged. Keep the cord away from any hot surface and
the warm-air outlet of the appliance.
6. Do not insert any object or metal in the hair dryer to avoid damage or
electric shock.
7. Do not cover or stuff the inlet or outlet vents of the appliance.
8. The hair dryer is protected by a safety cut out. It will cut off the power
automatically if the appliance gets too hot. In this case, slide the switch
to the position “0”, unplug the appliance and let it cool down.
9. Always keep the warm-air outlet of the appliance clean with a small
brush. Disconnect the hair dryer from the power socket before cleaning.
Wipe the body with a soft cloth.
10. Do not put a hot hair dryer on any article that is sensitive to high
temperature. Allow the appliance cooling to the room temperature
before storage.
11. The temperature of the hair dryer will be high while in operation. Do
not touch the hot surface with your body. Never align the appliance to
eyes or other sensible body parts.
CLEANING
Wipe the outlet surface of the hair dryer with a slightly moist cloth, and then
wipe it dry. This hair dryer is a precision designed professional tool. It must
breathe to operate at its peak efficiency. To ensure this, be sure the air intake cap
is always free from lint, hair or others. Ensure the unit is not operating or
connected to the socket. To clean, remove the air intake cap, and then clean the
air intake cap with a vacuum or brush. This should be done on a regularly basis.
HOW TO PUT IT AWAY
- Disconnect the plug of the hair dryer from the socket.
- Leave the hair dryer to cool down completely.
- Do not wind the cable around the appliance.
THIS PRODUCT IS CERTIFIED ACCORDING TO
