Hollyland HLHC100B User manual

HDMI Extender over TCP/IP
USER MANUAL
1. Description
HLHC100B HDMI extender provides extension of HDMI signals long distances over a single CAT5e/6 cable, it
supports high resolution up to 1920*1080@60Hz and IR signal transmission. The extender can use for a wide
range of applications requiring long distance transmission of high resolution with high quality by its good
stability and powerful security.
2. Features
Transmits HDMI video and audio signals up to 120m over a single CAT5e/6 cable;
Support video resolution up to 1920*1080@60Hz;
Support IR signal transmission;
Support over TCP/IP, one to many application with Ethernet switch;
Compliance with HDMI 1.3 and HDCP 1.2 standard;
High compatibility, can auto-match source and display device;
Built-in automatic adjustment system, make the image smooth, clear and stable;
Built-in ESD protection system;
Simple to install, plug and play;

3. Specifications
Parameter
Description
Video
Standards
HDMI 1.3; HDCP 1.2
Maximum pixel clock
165MHz
Maximum data rate
6.75Gbps
Resolution
1920X1080@60Hz
Connector
HDMI-A
Impedance
100Ω
IR
Interface
3.5mm earphone seat
Signal direction
Unidirectional
Signal type
Digital
IR frequency
38khz(standard) ; 20-60KHz (Can be customized)
Ethernet
Interface
RJ45
Transmission distance
CAT5e/6 - 120m
Other
Power supply
The power adapter: DC 5V/1A
Power dissipation
MAX 3W
Temperature
Operating: -5
℃
~ +70
℃
Humidity
Operating: 5% ~ 90%
Dimension
100*60*25mm
The warranty
1 year free warranty

4. Panel
Port name
Description
HDMI IN/OUT
HDMI signal input/output
IR IN/OUT
IR signal input/output
RJ45
Ethernet interface
DC/5V
Power adapter socket
RESET
Press for 5 second to restore system setting to factory default
LED indicator
Description
STATUS
Video signal connection indicator
POWER
System power indicator
5. Package list
HDMI transmitter ……………………….……. 1 pc
HDMI receiver …………………………………. 1 pc
Power adapter ……………………………….... 2 pcs
IR TX/RX terminal …………………………….. 1 set
User manual …………………………………..… 1 pc

6. Installation
1、Connect the provided DC/5V power supplies to the power socket of the transmitter and the receiver,
2、Connect an HDMI cable between the HDMI input port of transmitter and the HDMI output port of the video
source,
3、Connect the HDMI output port of receiver to the display device with HDMI cable,
4、Connect the transmitter RJ45 port to the receiver RJ45 port using a single CAT5e/6 cable.
7. Diagram
Distributed by
 

Phone: [phone], Email: [e-mail]
Suite 1A Level 2, 802 Pacific Highway, Gordon NSW 2072
www.ultralinks.com.au