Home Accents Holiday 1001302140 User manual

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be
followed including the following:
a) READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b)This product is for indoor use only. The electrical rating0.4 A120V60
Hz.
c) This seasonal use product is not intended for permanent installation or
use.
d)Donotmountorplaceneargasorelectricheaters,fireplace,candlesor
other similar sources of heat.
e)Donotsecurethewiring of theproductwithstaplesor nails, or place on
sharp hooks or nails.
f) Do not let lamps rest on the supply cord or on any wire.
g)Unplug the product when leaving the house, when retiring for the night,
or if left unattended.
h) This is an electric product –not a toy! To avoid risk of fire, burns
personal injury and electric shock it should not be played with or placed
where small children can reach it.
i)Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string.
k)Donotclosedoorsorwindowsontheproductorextensioncordsasthis
may damage the wire insulation.
I)Do not cover the product with cloth,paperoranymaterial not part ofthe
product when in use.
m) This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows, unplug
theproductfromtheoutlet. Also unplug any additionalstrings orproducts
that may be attached to the product. Replace the fuse as per the User
Servicing Instructions (following product marking for proper fuse rating)
and check the product. If the replacement fuse blows, a short-circuit may
be present and the product should be discarded.
n)This product is equipped with push-in type lamps. Do not twist lamps.
o)Thisproducthasapolarized plug (one blade is wider than the other) as
afeaturetoreducetheriskofelectricshock. Thisplugwillfitinapolarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not use with
an extension cord unless plug can fully inserted. Do not alter or replace
the plug.
p)Read and followallinstructionsthat areontheproduct or providedwith
the product.
q) SAVE THESE INSTRUCTIONS.
Pre-Assembly
Package Contents
Part
Description
Quantity
A Tree top 1
B Tree center 1
C
Tree bottom
1
D
Tree stand
1
E
Power supply cord with a
foot pedal switch
1
7.5' Warm White/Multi LED Color Changing
self Shape One Plug Tree
SKU# 1001302140
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step2.Openthestandtoa90degreeangleuntiltheholelinesupwiththe
hole on the tube.
Step 3. Screw an eye bolt into the hole.
CAUTION! – ALWAYS UNPLUG YOUR TREE
FROM ITS POWER SOURCE BEFORE ASSEMBLING OR
DISASSEMBLING.
Assembling the tree
Please remove protective covers from the base of the pole for each tree
section before assembling.
Step1. Inserttreebottom (C)intothetreestand(D)andtighten thescrew.
(See Fig. 1)
Step 2. Insert tree center (B) into the tree bottom (C). (See Fig. 2)
Step 3Insert the tree top (A) into the tree center (B). (See Fig. 3)
Step 4. Connect the end connector of power cord with foot pedal switch
(E) with the connector found on the bottom section (C) in correct
direction (always match the connection on the end connector of
powercordto the concaveonthe connectorfound onthebottom
section (C) according to the magnified drawing on Fig. 4.
Step5. Allowbranchestofallintoplaceorgentlypullbranchesupandout.
Whenadjustingbranchesbesurethatallwiresarefreeofbranch
hinges. (See Fig. 5)
Step 6. Shape the branches. Starting with tips closest to the pole, shape
one tip to the right, one to the left and one at the center of the
main stem. Repeat pattern for each branch. (See Fig. 6)
Step 7. Plug the well-connected power supply cord from the bottom
section (C) into electrical outlet. Please note this tree comes
with a foot pedal switch for changing functions. This tree is
Color Changing, the 8 lighting options available are:
1.Steady Warm White
2.Flashing Warm White
3.Slow Fade Warm White
4. Steady Multicolor

5. Flashing Multicolor
6.Slow Fade Multicolor
7.Sequential Multicolor & Warm White
8.Slow Fade Multicolor & Warm White
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose, broken
bulbs and /or missing bulbs. Replace bulbs promptly with the
replacement bulbs provided in order to maintain the performance and life
expectancy of your tree.
Step1. Connecteachtreesectionwellandplugthepowercordintoawall
outlet.
Maintenance
Fuse Replacement
A) Extension cord fuse replacement(1 replaceable 3A, 125 V fuse is
located in the plug):
Note: This plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug.
1. Graspplugandremove fromits powersource.
2. Locate blown fuse by sliding access cover on
top of plug towards prongs.
3. Remove blown fuse by turning the plug over.
Fuses should fall into your hand (gentle tapping
may be required).
4. Locate spare replacement fuse included in plug.
5.Insertsparereplacement fuse. Close fuse cover by sliding fuse access
cover towards the cord.
CAUTION:To reduce risk of fire –replace fuse in extension
cord with only 3 A, 125 V fuse. Do not replace attachment plug. Discard
product if the attachment plug is damaged.
Replacing the bulbs
1. Grasp plug and remove from itspower source.
2. Unlock the lamp lock on the socket of the bulb.
3. Pull bulb AND plastic base straight out of socket. Do not twist bulbs
while you are removing them.
4. Replace burnt outbulbwith3.0V, 0.06 WLED bulb ONLY. (Additional
bulbs are included for your convenience.)
5. Relock the lamp lock on the socket of the bulb.
If the new lamp base does not fit in lampholder, follow these steps:
Pull reflector out.
Remove the base of the burned-out
bulb by straightening the bulb leads,
and gently pull bulb out.
Thread leads of new bulb through
holes in old base with one lead in each hole.
After bulb is fully inserted into base, bend each lead up so that the
leads will touch the contacts inside the bulb holder.
Insert the reflector into the base.
CAUTION! – ALWAYS UNPLUG YOUR TREE
FROM ITS POWER SOURCE BEFORE ATTEMPTING
FUSE AND BULB REPLACEMENT.
Care and Cleaning
Step 1. Remove all ornaments and decorations.
Step2. Unplugtheplugcordfromthewalloutlet. Andremoveyourpower
supply cord with an on/off foot pedal switch from bottom section
(C) and save it.
Step 3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
Step 4. Repeat this step for the center and bottom tree sections.
Step 5. Carefully place all tree sections into a shipping box and tape it
shut.
Step 6. Store your tree in a cool, dry place away from sunlight.
Warning: Please note that changes or modifications not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
Troubleshooting
Problem Solution
Thetreedoes
not light
Ensure that all tree sections are connected well into
each other and that the tree is plugged into the wall
outlet.
Check for blown fuses at the power cord plug.
Replace as needed with the replacement fuses
provided.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement bulbs
provided.
If you are still experiencing problems with the tree
please call 1-877-527-0313 for instructions.

However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
UL Model No. TME7.5-6(0.4)