Home Accents Holiday 21RT08421241 User manual

THD SKU# 1006 128 621
Model # 21RT08421241
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 8 ft Halloween Classics Giant-Sized LED Ghost
Tree. We strive to continually create quality products designed to enhance
your home. Visit us online to see our full line of products available for
your home improvement needs. Thank you for choosing Home Accents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
8ft Halloween Classics Giant-Sized
LED Ghost Tree
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground or a flat
surface. Many parts are connected by the lighting string that runs throughout the
item. Take special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package against
the parts list. It is recommended to assemble parts of the product while laying flat on
the ground versus standing the item up to assemble the parts. There are multiple
electrical plug-in cords on the product. Be sure to plug all the cords in. If any parts
are missing or damaged do not attempt assembly but contact our customer service
center or return the product to place of purchase with receipt.
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on the cord.
CAUTION:The lighting string on this product is rated at 19.2 Watts (0.16
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the product taking caution not to cut any electrical wires.
c. Wipe the product with a damp cloth and allow to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Trouble Shooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
products that have been subjected to unauthorized repair and/or modification and damage
caused by shipping and improper handling, alterations, misuse, in store display models or
accidents. Questions, problems, missing parts? Before returning to the store, call Home
Accents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
Diagram of Parts
Parts List
A Lower Base Section 1
B Upper Middle
Section B 1
C Upper Right Section
C 1
D Upper Left Section D 1
E Stabilizing Bar 1
F Stabilizing Bar 1
G Base Stand 1
Hardware List
H Spare Fuse 8
I Spare Bulb 8
J Plastic Tie 25
K Cotter Pin 2
L Anchoring String 4
M Ground Stake 8
I
H
K
J
L
M
C BD
F
G
E

A
SSEMBLY
1 Assembling the Branches to the Upper Sections
NOTES: Place the Sections of the Ghost Tree down on the ground.
Each Upper Section (B, C, D) has branches attached. Insert the
connecting rods at the bottom of each branch into the connecting holes
on the top of each Upper Section (B, C, D) then fasten together at the
connecting loops with the Plastic Ties (J). Use the diagram of the
finished Tree on this Assembly Sheet as a reference to place the
branches on each Upper Section. The branches are connected to the
Upper Sections (B, C, D) by the lighting string that runs throughout each
section.
2 Assembling the Upper Middle Section to the Lower Base
Section
Insert the connecting rods on the bottom of the Upper Middle Section (B)
into the connecting holes on the top of the Lower Base Section (A) then
fasten together at the connecting loops with the Plastic Ties (J).
3 Assembling the Lower Base Section to the Base Stand
Insert the horizontal connecting rods on the bottom of the Lower Base
Section (A) into the connecting holes on the Base Stand (G) then fasten
together at the connecting loops with the Plastic Ties (J).
4 Attach the Stabilizing Bars to the Upper Middle Section
and Base Stand
Attach the sections of the Stabilizing Bar (E, F) together and lock with built in
locking pin. Insert the end connecting rod on the upper Stabilizing Bar (E)
into the matching connecting hole on the back of the Upper Middle Section
(B) then secure with the Cotter Pin (K). Insert the end connecting rod on the
lower Stabilizing Bar (F) into the Base Stand (G) then secure with the Cotter
Pin (K).
5 Stand the assembled sections A & B upright on the Base
Stand
Stand the assembled sections A & B to an upright standing position.
6 Assembling the branches to the Upper Left and Right
Sections then to the Lower Base Section
Insert the connecting rods on the bottom of the Right and Left Upper
Sections (C, D) into the connecting holes on the top of the Lower Base
Section (A) then fasten together at the connecting loops with the Plastic
Ties (J). Secure the Upper Sections (B,C,D) together with the Plastic
Ties (J) at the connecting loops per the diagram below.
7 Assembling the Anchoring Strings and Ground Stakes
This product includes heavy duty Anchoring Strings (L) and large plastic
Ground Stakes (M) to secure to ground. Hook the plastic clip end of each
of Anchoring Strings (L) onto the metal loop on the Upper Middle Section
(B) per the diagram below. Attach the looped end of theAnchoring String
(L) to the top clip on the Ground Stakes (M). Pull the Anchoring Strings
with Stake attached tightly out and away from the Tree evenly at 4
corners then insert the Stake firmly into the ground. With the remaining
4 Ground Stakes (M) secure the top clip to the Base Stand at 4 corners
then into the ground firmly.
D
B
C J
A
B
J
B
A
J
G
A
B
G
E
K
F
K
A
B
G
D
GJ
A
B
C
J
B
M
L
L
M