Home Accents Holiday 22RT20222141 User manual

SKU # 1007 581 054
Model # 22RT20222141
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this Set of 3 - Elegant Deer Family with 205 Multi
LED Lights . We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing HomeAccents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
Set of 3 - Elegant Deer Family with 205
Multi LED Lights
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground
versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center or return
to place of purchase with purchase receipt.
Assembly of this product may require more than one person.
1-855-HDHoliday (1-855-434-6543）
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 14.4 Watts
(0.12Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Discard or return to place of purchase with purchase receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures,
loose connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor, ground or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse, in store display models or accidents. Questions, problems, missing parts?
Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6
p.m., EST, Monday-Friday 1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
Parts List
Locater Name Qty.
A Head / Neck of Doe 1
B Body of Doe 1
C Leg of Doe 4
D Scarf of Doe 1
E Head / Neck of Baby
Deer 1
F Body of Baby Deer 1
G Leg of Baby Deer 4
H Scarf of Baby Deer 1
I Antler of Deer 1
J Head / Neck of Deer 1
K Body of Deer 1
L Leg of Deer 4
M Scarf of Deer 1
Hardware List
Locater Name Qty.
N Spare Fuse 6
O Spare Bulb 7
P Ground Stake 12
Q Plastic Tie 30
A
B
C
D
E
F
G
H
I
J M
K
L
N
O
P
Q

A
SSEMBLY
1 Assembling the Legs to Body of Doe
Insert the connecting rods on the Front and Hind Legs of Doe (C) into the
connecting holes on the underside of the Body of Doe (B) and fasten over
the metal wire with Plastic Ties (Q). The Legs come with metal bars attached
to stabilize the Doe. Insert the hooked end of the metal bars into the metal
hole on the opposite Leg.
2 Assembling the Head/Neck & Scarf to Body of Doe
Insert the connecting rods on the bottom of the Head / Neck of Doe (A) into
the connecting holes on the front of the Body of Doe (B) then fasten at the
connecting loops with Plastic Ties (Q). Insert the connecting rods on the Scarf
(D) into the connecting holes on the Head / Neck (A) and fasten at the
connecting loops on the bottom of the scarf an the top of the Doe's back with
Plastic Tie (Q).
3 Assembling the Legs to Body of Baby Deer
Insert the connecting rods on the Front and Hind Legs on Baby Deer (G) into
the connecting holes on the underside of the Body of Baby Deer (F) and
fasten over the metal wire with Plastic Ties (Q). The Legs come with metal
bars attached to stabilize the Baby Deer. Insert the hooked end of the metal
bars into the metal hole on the opposite Leg.
4
A
ssembling the Head/Neck &Scarf to Body of Baby Deer
Insert the connecting rods on the bottom of the Head / Neck of Baby Deer (E)
into the connecting holes on the front of the Body of Baby Deer (F) and fasten
at the connecting loops with Plastic Tie (Q). Insert the connecting rods of the
Scarf (H) into the connecting holes of the Head / Neck (E).
5 Assembling the Legs to Body of Deer
Insert the connecting rods on the Front and Hind Legs of Deer (L) into the
connecting holes on the underside of the Body of Deer (K) and fasten over
the metal wire with Plastic Ties (Q). The Legs come with metal bars attached
to stabilize the Deer. Insert the hooked end of the metal bars into the metal
hole on the opposite Leg.
6 Assembling the Head/Neck & Scarf to Body of Deer
Insert the connecting rods on the bottom of the Neck of Deer (J) into the
connecting holes on the front of the Body of Deer (K) and fasten at the
connecting loops with Plastic Ties (Q). Insert the connecting rods on the
Scarf (M) into the connecting holes of the Neck (J) and fasten at the
connecting loops on the bottom scarf and the back of the Deer with Plastic
Tie (Q).
7 Assembling the Antlers on the Head / Neck of Deer
Insert the connecting rods on the bottom of the Antlers (I) into the connecting
holes on the top of Head / Neck (J) and fasten at the connecting loops on
Antler and Ear with Plastic Tie (Q).
8 Assembling the Ground Stakes
Place the Ground Stakes (P) over the metal frame at each hoof of the Deer, Doe
and Baby Deer then into the ground.
B
C
Q A
B
Q
D
G
F QE
F
H
Q
L
K Q
J
K
Q
M
I
J
Q P