Home Accents Holiday TG66M2X38D00 User manual

Christmas Tree
Model# TG66M2X38D00
Sku # 1000 862 766
Package Contents
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
n. SAVE THESE INSTRUCTIONS
b. This product is for indoor use only.
c. This seasonal product is not intended for permanent installation or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces,candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or place
on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for the
night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or
placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light string.
k. Do not close doors or windows on the product or extensions cords as
this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material that is not a
part of the product when in use.
m.Read and follow all instructions that are on the product or provided
with the product.
Pre-Assembly
Operation
Assembling the tree stand
Assembly
When using electrical products, basic precautions should always
be followed, including the following:
Step 1. Before you start to assemble your tree, choose an
appropriate location near a wall outlet.
Step 2. Assemble the tree stand and place on a level surface.
Turning on the tree
Maintenance
Care and Cleaning
Spare parts
Repairing Loose Hinges
Step 1.Remove the protective caps from the tree bottom (C) and insert
the pole into the tree stand (D).
Step 2.Remove the protective caps from the tree center (B) and insert the
pole into the tree bottom (C) .
Step 3.Insert the tree top (A) into the tree center (B).
Step 4.Shape the branches to your preference by working from the
bottom to the top. When adjusting branches, ensure that all wires
are free of branch hinges.
Step 5.Connect the plug(s) securely to the extension cord(s) as per the
color labels indicated in attached photo and insert the green label
extension cord plug into the wall outlet.
Step 6.When finished shaping the branches, slightly upsweep all branch
tips for a uniform look.
NOTE: If some bulbs do not light or flicker, search for any loose plugs
and/or broken, loose, or missing bulbs. Replace bulbs promptly with the
replacement bulbs provided in order to maintain the performance and
life expectancy of your tree.
Step 1.Connect the light strings of the tree together and plug the power
cord into a wall outlet.
Step 2.If the tree comes with a foot pedal, step on the On/Off button.
This tree package includes hinge pins, washers, fuse and bulbs for any
replacement or repair that you need to perform on your tree. If extra parts
are needed, contact the Customer Service Team at 1-877-527-0313
between the hours of 8 am and 5 pm EST, Monday through Friday.
Step 1.Remove all ornaments and decorations.
Step 2.Unplug the cord from the wall and then unplug each section of the
tree.
Step 3.Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
Step 4.Repeat this step for the bottom tree section.
Step 5.Carefully place all tree sections into a shipping box and tape it
shut.
Step 6.Store your tree in a cool, dry place away from sunlight.
Step 1.Place the branch into the slot of the bracket
Step 2.Insert a new hinge pin through the holes of the bracket and secure
with a washer.
Assembling the tree
Part Description Quantity
D Tree stand 1
A Tree top, tag 3 1
B Tree center, tag 2 1
C Tree bottom, tag 1 1
*Electrical Rating For The Tree
(For Indoor Use Only)
Input:120V, 60Hz, 0.16A Max.
Output: 29V DC 0.28A
Control box
Section 2
Section 3
Section 1
70S
50S
60S
Adaptor
To Be Plugged
Into Wall
Outlet
Press the selector button on the “Dual Color Light
Controller” or “Remote Controller” to select among:
(1) CLEAR AND MULTI-COLOR ALTERNATING;
(2) CLEAR LIGHTS;
(3) MULTI LIGHTS;
(4) TURN OFF BOTH LIGHTS.
HOW TO USE THE DUAL COLOR LIGHT CONTROLLER
AND REMOTE CONTROL:
User servicing instructions

Troubleshooting
Problem Solution
The tree does not
light
Ensure that all tree sections are plugged into
each other and that the tree is plugged into
the wall. If your tree came with a foot pedal,
step on the On/Off button.
Check for blown fuses at the power cord
plug. Replace as needed with the
replacement fuses provided.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement bulbs
provided
Christmas Tree
Model# TG66M2X38D00
Sku # 1000 862 766
Light
Controller
Selector
Button
Remote
Controller
Note: For the remote controller, replace only with CR2032
battery. See bottom of the remote controller for
replacement instruction.
CAUTION:Use only power adaptor that was
provided with this product. Using a different power
adaptor will damage the lights and cause fire, electrical
shock hazard.
CAUTION:Do Not Mix Old And New Batteries. Do
not mix alkaline, carbon-zinc, lithium, or re-chargeable
(Nickel-Cadmium or other types) batteries.
Use only
batteries of the same or equivalent type as recommended.
Remove all batteries when replacing. Do not dispose of
batteries in fire. Batteries may explode or leak.Batteries are
to be inserted with the correct polarity. Exhausted batteries
are to be removed from the toy. The supply terminals are
not to be short-circuited. Do not dispose of this product as
unsorted municipal waste. Collection of such waste
separately for special treatment is necessary. Do not ingest
batteries. Keep away from children.