Home Accents Holiday TGA0M4B65C00 User manual

ChristmasTree
Model: TGA0M4B65C00
Sku # 1003 143 506
This tree assmebles with Quick Set® technology ---
Set up and light up your tree in less than 10 minutes!
Assembling the tree
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
When using electrical products, basic precautions should
always be followed, including the following:
Eye Bolt
Click
Eye Bolt
Section 3
Tree top
Section 2
Section 1
Insert
Green Label
Plug Into Wall
Outlet
Foot Pedal
on/off Switch
S100
S100
S100
S100
S50
S100
S100
S50
S100
S100
Package Contents
Pre-Assembly
Part Description
E Tree stand
A Tree top
B
Tree center, Sticker 3
Tree center, Sticker 2
Tree center, Sticker 1
C
D
1
1
1
1
1
Quantity
TM
b. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use.When products are
used in outdoor applications,connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is
not provided,contact a qualified electrician for proper
installation.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces,candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or
nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h. This is an electric product and not a toy!To avoid riskof
fire, burns,personal injury and electric shock it should not
be played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire,
or light string.
k. Do not close doors or windows on the product or
extensions cords as this may damage the wire
insulation.
l. Do not cover the product with cloth, paper, or any
material that is not a part of the product when in use.
m. This product has a polarized plug (one blade is wider
than the other) as a feature to reduce the risk of electric
shock. This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet,reverse
the plug. If it still does not fit, contact a qualified
electrician. Do not use with an extension cord unless
plug can be fully inserted. Do not alter or replace the
plug.
n. This product is equipped with push-in type lamps. Do
not twist lamps.
o. This product employs overload protection (fuse). A
blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from
the outlet. Also unplug any additional strings or
products that may be attached to the product.Replace
the fuse as per the user servicing instructions (follow
product marking for proper fuse rating) and check the
product.
p. Read and follow all instructions that are on the product
or provide with the product.
q. SAVETHESE INSTRUCTIONS.
Assembling the tree stand
Assembly
Step 1. Pull apart the legs of the stand so that they are
snapped into an x-shape, place the tree stand on a
level surface.
Step 2. When inserting the bottom section of the tree into the
assembled stand, insert and turn the eyebolts into the
stand and tighten until the tree pole is firmly secured.
To close the stand,remove the eyebolts, press the metal button
and fold the legs together.
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Open the
protective
cap
NEED HELP?
DO NOT RETURN TO STORE. Call: 1-877-527-0313
Form 8am to 5pm EST, Monday through Friday.

Operation
Turning on the tree
Maintenance
Spare parts
Repairing Loose Hinges
1. Before using or reusing, inspect product carefully. Discard
any products that have cut, damaged or frayed wire
insulation or cords, cracks in the lampholders or
enclosures, loose connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and remove
all ornaments and decorations.
3. Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
5. When storing the product, carefully remove the product
from wherever it is placed, including tree, branches, or
bushes,to avoid any undue strain or stress on the product
conductors,connections, and wires.
Cover the protective cap on the poles
to avoid damaging the internal parts.
6. When not in use, store neatly in a cool,
dry location protected from sunlight.
7.
Keep out of reach of pets and children.
Use and Care Instructions
SPARE FUSE
User servicing instructions
Fuse replacement
ChristmasTree
Model: TGA0M4B65C00
Sku # 1003 143 506
The tree
does not
light
Troubleshooting
Problem Solution
Ensure that all tree sections are plugged into
each other and that the tree is plugged into the
wall. If your tree came with a foot pedal, step on
the On/Off button.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement bulbs
provided.
Check for blown fuses at the light string and
power cord plugs. Replace as needed with the
replacement fuses provided.
For blown fuses (if applicable), please refer to
User Servicing Instructions – Fuse Replacement
and replace as instructed.
Top view Side view
TM
Step 1. Remove the protective caps from the tree bottom (D)
and insert the pole into the tree stand (E).
Step 2. Continue by inserting the upper tree section(s) to the
lower section(s) until inserting the tree top.
Step 3. Shape the branches to your preference by working
from the bottom to the top. When adjusting branches,
ensure that all wires are free of branch hinges.
Step 4. Insert the green label extension cord plug into the wall
outlet. All your lights should now be lit.
Step 5. Shape the tree from the bottom to the top. Start with
the branches farthest from the pole – fan out in a star
shape, and continue until the entire tree is shaped.
Step 6. When finished shaping the branches, slightly upsweep
all branch tips for a uniform look.
NOTE: If some bulbs do not light or flicker, search for any
loose plugs and/or broken, loose, or missing bulbs.Replace
bulbs promptly with the replacement bulbs provided in order
to maintain the performance and life expectancy of your tree.
Step 1. Connect the light strings of the tree together and
plug the power cord into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the
On/Off button.
This tree package includes hinge pins,washers, bulbs, and
fuses for any replacement or repair that you need to perform
on your tree.If extra parts are needed,contact the Customer
ServiceTeam at 1-877-527-0313 between the hours of 8 am
and 5 pm EST,Monday through Friday.
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the
bracket and secure with a washer.
1. Grasp plug and remove from the receptacle or other outlet
device.Do not unplug by pulling on cord.
2. Open fuse cover.Slide open fuse access cover on top of
attachment plug towards blades.
3. Remove fuse carefully.
4. Risk of fire.Replace fuse only
with 5, 7 or 10 Amp, 125 Volt
fuse for the power cord set.
5. Close fuse cover.Slide closed
the fuse access cover on top of
attachment plug.
6. Risk of fire.Do not replace attachment plug. Contains a
safety device (fuse) that should not be removed. Discard
product if the attachment plug is damaged.