Home Accents Holiday TGF0M3P07L01 User manual

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
When using electrical products, basic precautions should
always be followed, including the following:
b. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are
used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is
not provided, contact a qualified electrician for proper
installation.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of
heat.
e. Do not secure the wiring of the product with staples or
nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of
fire, burns, personal injury and electric shock it should not
be played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire,
or light string.
k. Do not close doors or windows on the product or exten
sions cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any materi
al that is not a part of the product when in use.
m. This product is equipped with push-in type lamps. Do not
twist lamps.
n. Read and follow all instructions that are on the product
or provide with the product.
o. SAVE THESE INSTRUCTIONS
Christmas Tree
Model: TGF0M3P07L01
Sku # 1003 173 286
TM
Package Contents
Pre-Assembly
Part Description Quantity
A Tree top 1
BTree center, Sticker 8 1
CTree center, Sticker 7 1
DTree center, Sticker 6 1
HTree center, Sticker 2 1
ETree center, Sticker 5 1
FTree center, Sticker 4 1
GTree center, Sticker 3 1
I Tree center, Sticker 1 1
J Tree stand 1
Assembling the tree stand
Assembly
Bottom Cross Frame
Horizontal Connection Frame
Vertical Connection Tube
“L” Shape VerticalTube
Tube For Hooking Branches
Top Cross Flame
Bolt - Spec M8*16mm
Bolt - Spec M8*50mm
Nut - Spec M8
Triangle Bolt - Spec M6*18mm
Tree Stand Part List
No. Name Qty
1
1 PC
1 PC
1 PC
4 PCS
4 PCS
4 PCS
8 PCS
8 PCS
8 PCS
6 PCS
2
3
4
5
6
7
8
9
10
NEED HELP?
DO NOT RETURN TO STORE. Call: 1-877-527-0313
Form 8am to 5pm EST, Monday through Friday.

1
2
3
4
5
6
7
8
9
Foot Pedal on/off Switch
100S
100S
100S
100S
100S
100S
100S
100S
100S
100S
100S
100S
100S
100S
100S
50S
100S
100S
100S
100S
50S
100S
100S
100S
100S
Adapter
To Be Plugged
Into Wall
Outlet
Choose a location near a wall outlet,begin to assemble
the tree.
Follow below steps:
Step 1. Connect part 1 to 2, then screw part 7(Bolt).
Step 2. Connect part 2 to 3, then screw part 8(Bolt)
Step 3. Insert tree section 9 (I) to bottom cross frame(J),
and then insert tree section 8 (H) to section 9 (I),
section 7(G) to section 8 (H), then section 6(F) to
section 7 (G).
Step 4.
Connect part 3 to part 4, then screw part 7(Bolt).
Step 5. Connect part 4 to part 6, then screw part 8(Bolt).
Christmas Tree
Model: TGF0M3P07L01
Sku #1003 173 286
TM
Catuion: to avoid over current, please connect
lighting string accrding to the strings layout for the tree.
(see diagram below)
Assembling the tree
Step 1. Remove the protective caps,and insert the
section 5 (E) into the section 6 (F).
Step 2. Insert the section 4 (D) into the section 5 (E),
and insert the section 5 (E) into the section 6 (F),
Step 3. Insert the section 2 (B) into the section 3 (C),
insert the tree top (A) into the section 2 (B).
Step 4. Shape the branches to your preference by
working from the bottom to the top. When
adjusting branches, ensure that all wires are
free of branch hinges.
Step 5. Connect the plug(s) securely to the extension
cord(s) as per the color labels indicated in
attached photo and insert the green label
extension cord plug into the wall outlet.
Step 6. Shape the tree from the bottom to the top.
Start with the branches farthest from the
pole – fan out in a star shape, and continue until
the entire tree is shaped.
Step 7. When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
Top view Side view

Maintenance
Spare parts
Repairing Loose Hinges
Troubleshooting
Problem Solution
The tree
does not
light
Ensure that all tree sections are plugged
into each other and that the tree is
plugged into the wall.If your tree came
with a foot pedal, step on the On/Off
button.
Check for loose, broken, or missing bulbs
and replace as needed with the
replacement bulbs provided
Care and Cleaning
Step 1. Remove all ornaments and decorations.
Step 2. Unplug the cord from the wall and then unplug
each section of the tree.
Step 3. Gently lift the tree top straight up to remove
from the center sections and fold all branches
towards the pole.
Step 4. Repeat this step for the bottom tree section.
Step 5. Carefully place all tree sections into a shipping
box and tape it shut.
Step 6. Store your tree in a cool, dry place away from
sunlight.
Step 7. Keep out of reach of pets and children.
Step 1. Place the branch into the slot of the bracket.
Step 2. Insert a new hinge pin through the holes of the
bracket and secure with a washer.
Operation
Turning on the tree
NOTE:If some bulbs do not light or flicker, search for
any loose plugs and/or broken, loose, or missing bulbs.
Replace bulbs promptly with the replacement bulbs
provided in order to maintain the performance and life
expectancy of your tree.
Step 1. Connect the light strings of the tree together
and plug the adapter into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the
On/Off button.
This tree package includes hinge pins, washers and
bulbs for any replacement or repair that you need to
perform on your tree. If extra parts are needed,
contact the Customer Service Team at 1-877-527-0313
between the hours of 8 am and 5 pm EST, Monday
through Friday.
CAUTION:Use only power adapter that was
provided with this product. Using a different power
adapter will damage the lights and cause fire, electrical
shock hazard.
Christmas Tree
Model: TGF0M3P07L01
Sku # 1003 173 286
TM
Step 1. Grasp the power adapter or power cord plug, and than
unplug from the power outlet.Do not pull the power cord.
Step 2. Lift up lamp lock tab, then pull the
lamp and plastic lamp base straight
out of the lamp-holder.
Step 3.
Replace with a new spare lamp
provided with this product.
(Reference figure only)
LAMP REPLACEMENT