Home Accents Holiday TY-S46-C User manual

USEAND CARE GUIDE
2-Piece LED Lighted Spiral Trees
THANK YOU
We appreciate the trust and confidence you have placed in Home Accents through the purchase
of this 2-Piece LED Lighted Spiral Trees. We strive to continually create quality products designed
to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing HomeAccents!
Guarantee
What is Covered
The product is intended for residential seasonal use for approximately 90 days per year. This
product is covered by a 90 day limited guarantee due to defects in material and workmanship.
Return the product with purchase receipt to the location of purchase for refund within 90 days
of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDs, batteries,
products that have been subjected to unauthorized repair and/or modification and damage caused
by shipping and improper handling, alterations, misuse or accidents. Questions, problems, missing
parts? Before returning to the store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
SKU # 1001777426
YOW SKU # 724 772
Model # TY-S46-C
Pre-Assembly
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return to store. Assembly of this product may
require more than one person.
PACKAGE CONTENTS
A
.
B.
C.
D.
E.
F.
G. H.
Package Contents/Parts List
Part Description Quantity
A Star Tree Topper 1
B Spiral Tree 1
C Driving Cap 1
D Plastic Cap 1
E Pole Section 2
F Tree Stand 1
G Fuse 1
H Replacement Bulbs 2

Assembly
Assembling the Spiral Tree
For Indoor Use:
(1) The Tree Stand (F) has a short vertical section. Insert one Pole Section (E), with the
big end down, into the short vertical section on the Tree Stand. Insert the second Pole Section
into the upper end of the first Pole Section. FIG.1
(2) Attach the Plastic Cap (D) on the top of the second Pole Section. FIG.1
(3) Pass the Plastic Cap through the bottom of top hole of the Spiral Tree (B) and let the Spiral
Tree drape down around the Pole Section. FIG.1
(4) Attach the Star Tree Topper (A) into the top of the Plastic Cap. FIG.2
(5) Insert the hooks at the end of two supporting strings into the metal holes on the two arms of
the tree stand. FIG.2
For Outdoor Use:
(1) One of the arms of the Tree Stand (F) is tapered. Drive the sharp arm of the Tree Stand into the
ground using the Driving Cap (C) on the opposite end of the Tree Stand. FIG.3
(2) Insert one Pole Section (E), with the big end down, into the vertical arm of the Tree Stand. (Be
sure to remove Driving Cap). Insert the second Pole Section into the upper end of the first Pole
Section.FIG.3
(3) Attach the Plastic Cap on the top of the second Pole Section. FIG.3
(4) Pass the Plastic Cap through the bottom of the top hole of the Spiral Tree (B) and let the Spiral
Tree drape around the Pole Sections. FIG.4
(5) Place the Star Tree Topper (A) into the top of the Plastic Cap. FIG.4
(6) Insert the hooks at the end of the two supporting strings into the metal holes on the two arms
of the tree stand. FIG.4
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 4.8 Watts
(0.04 Amps). Do not overload. Do not connect to other lighting strings, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to Store or discard if the product has cuts, damage or frayed wire
insulation on cords, cracks in the socket enclosures, loose connections or exposed
copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product, wire and lighting connections. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.1 FIG.2
FIG.3 FIG.4