Home Accents Holiday 22RT3382225YX User manual

Troubleshooting
Locater Name Qty.
A Body of Cat 1
B Tail of Cat 1
C Base Stand 1
D Support Bar 1
Locater Name Qty.
E Cotter Pin 5
F Plastic Tie 7
G Ground Stake 4
Parts List Diagram of Parts
Hardware List
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in accordance with directions provided on or
with the product, burn out of bulbs or LEDS, batteries, products that have been subjected to unauthorized repair and/or modification
and damage caused by shipping and improper handling, alterations, misuse, in store display models or accidents. Questions,
problems, missing parts? Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-
Friday 1-855-HDHoliday (1-855-434-6543)
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
We appreciate the trust and confidence you have placed
in Home Accents through the purchase of this 4.5ft
Halloween Classics LED Cat Silhouette. We strive to
continually create quality products designed to enhance
your home. Visit us online to see our full line of products
available for your home improvement needs. Thank you
for choosing Home Accents!
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
Thank you!
The product is intended for residential seasonal use for 90 days per year. This product is covered by a 90 days limited guarantee
due to defects in material and workmanship. Return the product with purchase receipts to the location of purchase for refund within
90 days of purchase.
Pre-Operation
CAUTION : Grasp the plug to insert or remove from the power source. Do not unplug by pulling on cord.
CAUTION : The lighting string on this product is rated at 14.4 Watts (0.12 Amps). Do not overload. Do not connect to another
lighting string, decorative outfit or other electrical products. Before you use or re-use this product inspect it carefully. Discard or
return to place of purchase with purchase receipt if the product has cuts, damage, frayed wire insulation on cords, cracks in the
socket enclosures, loose connections, exposed copper wire or other obvious damage.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any undue strain or stress on the product connections
and wires. If the product is placed somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
ASSEMBLY INSTRUCTIONS
4.5ft Halloween Classics LED Cat Silhouette
USE AND CARE GUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many parts are connected by the lighting string that runs
throughout the item. Take special care not to pull, cut or damage the lighting string. Read the entire manual prior to assembly and
identify all the parts included in the package against the parts list. It is recommended to assemble parts of the product while laying
flat on the ground versus standing the item up to assemble the parts. If any parts are missing or damaged do not attempt assembly
but contact our customer service center or return to place of purchase with purchase receipt.
Assembly of this product may require more than one person.
1-855-HDHoliday (1-855-434-6543 ）
THD SKU #
Model # 22RT3382225YX
A
B
C
D
E
F
G

1
Assembling the Body of Cat to the Base Stand
2
Assembling the Tail of Cat to Body of Cat
Place all the parts flat on the ground. Insert the connecting rods on
the bottom of Cat's Body (A) into the matching connecting holes on
the Base Stand (C) and fasten at the connecting loops with Plastic
Tie (F). Insert each hooked end of the Support Bar (D) into the
matching connecting holes on the back of Cat's Body (A) and the
Base Stand (C) respectively then secure with the Cotter Pins (E).
Insert the connecting rods on the Cat's Tail (B) into the matching
connecting holes on the Cat's Body (A) then secure with the Cotter
Pin (E). Secure at the connecting loop with Plastic Tie (F).
3
Assembling the Ground Stakes
Place the 4 Ground Stakes (G) over the 4 Corners of the Base Stand
then firmly into the ground.
ASSEMBLY
A
C
D
E
F
A
B
E
F
G