Home Accents Holiday 921947 User manual

Package Contents SKU#921947
Assembling the Cone Tree and
Securing to the Ground
Part Description Quantity
ALighting Set with Top Star 1
BTop Pole Rib 1
CPole 12
D,E,F&
G
Hooked Bar 4
HSection of Base 4
IGround Stake 4
JWire Tie 2
KSpare Fuse 1
LSpare Bulb 5
Fig.3
Assembly Fig.4
Fig.1 Pre-Operation
Fig.2
CAUTION: Grasp the plug to remove or insert into the power
source. Do not unplug by pulling on cord.
CAUTION: The lighting string on this product is rated at 57.6
Watts (0.48 Amps). Do not overload. Do not connect to
another lighting string, decorative outfit, or seasonal product.
Before you use or re-use this product, inspect it carefully.
Discard if the product has cuts, damage, frayed wire
insulation on cords, cracks in the socket enclosures, loose
connections, or exposed copper wire.
Package Contents/Parts List
Assembling the Base and Tree
Step 1. Insert the Top Star (A) to the Top Pole Rib (B) tightly.
Drape the lighting set down around the Tree. Align each
lighting string with a stacked pole section then fasten the
lighting string to the pole with the attached wire ties. Secure
the end of each lighting string to the base with the wire ties.
Fig.3
Step 2. Secure the Cone Tree to the ground with the Ground
Stakes (I). Fig.4
Step 2. Insert the wide end of Pole (C) thru the extruding rod from the outer rim of Base
Section (H) then add poles to form the Tree shape. At the top insert the Top Pole Rib (B)
into the matching ends of the vertical poles. Fig.2
Step 1. Place four Hooked Bars (D),(E),(F) & (G ) and the matching four Section of Base
(H) on the floor. Insert one hooked end of each Bar into the corresponding holes in the
Base Sections. Two of the Hooked Bars (D) & (F) have tube holes welded on them.
Insert the hooked end of (D) thru the hole in (F) then hook the ends of other two Bars (E)
& (G) onto the matching holes in the connected bars (D)&(F) to form a circular base.
Fasten (E) & (G) with Wire Tie (J). Fig.1
7"#TWINKLING#MULTI‐COLOR#CONE#TREE
E. Right
A
B
C
D
H
I
J
K
L
F
E
G

Care and Cleaning
a. Carefully remove the product from wherever it is placed.
This helps to avoid any undue strain or stress on the product
conductors, connections, and wires.
b. Wipe the unit with a damp cloth and allow the unit to dry
before storing.
c. Store the product neatly in a cool, dry location protected
from sunlight.
FOR INDOOR AND OUTDOOR USE
MODEL NO. TY-S7-140L-G40-TW5
Roundtripping Ltd.
Hong Kong, China
All Rights Reserved
Printed in China
Step 2. Insert the wide end of Pole (C) thru the extruding rod from the outer rim of Base
Section (H) then add poles to form the Tree shape. At the top insert the Top Pole Rib (B)
into the matching ends of the vertical poles. Fig.2