Home Accents Holiday TY261-1611-0 User manual

OMS THD SKU # 1001 766 883
Model # TY261-1611-0
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 86in 120 Light LED Twinkle Acrylic Eiffel Tower.
We strive to continually create quality products designed to enhance your
home. Visit us online to see our full line of products available for your home
decoration needs. Thank you for choosing Home Accents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
86in 120 Light LED Twinkle Acrylic Eiffel Tower
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 33.6Watts
(0.28Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product, inspect it
carefully. Discard or return to place of purchase with purchase receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures,
loose connections or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Spire 1
B Fifth Section 1
C Fourth Section 1
D Third Section 1
E Second Section 2
F Base Section 4
Hardware List
Locater Name Qty.
G Ground Stake 4
H Plastic Tie 15
I Spare Fuse 2
J Spare Bulb 4 G H I J
D C B A
E
F

A
SSEMBLY
1 Assembling the Base Section
Align the four parts of the Base Section (F) and insert the connecting
rods on each part into the matching holes with the adjacent part and
fasten together with Plastic Tie (H).
2 Assembling the Second Section to the Base Section
Align the two parts of the Second Section (E) and insert the connecting
rods on both parts into the matching holes with the adjacent part and
fasten together with Plastic Tie (H). Stand the Base Section (F) in an
upright position then insert the metal connecting rods on the bottom of the
Second Section (E) into the matching holes on the top of the Base Section
(F) and fasten together at the connecting loops with Plastic Tie (H).
3. Assembling the Third Section to the Second Section
Insert the metal connecting rods on the bottom of the Third Section (D)
into the matching holes on the top of the Second Section (E) and fasten
together at the connecting loops with Plastic Tie (H).
4. Assembling the Fourth Section to the Third Section
Insert the metal connecting rods of the bottom of the Fourth Section (C) into
the matching holes on the top of the Third Section (D) and fasten together
at the connecting loops with Plastic Tie (H).
5. Assembling the Fifth Section to the Fourth Section and
the Spire
Insert the metal connecting rods on the bottom of the Fifth Section (B)
into the matching holes on the top of the Fourth Section (C) and fasten
together at the connecting loops with Plastic Tie (H). Insert the metal
connecting rods on the Spire (A) into the matching holes on the top of the
Fifth Section (B) and fasten together at the connecting loops with Plastic
Tie (H).
6 Assembling the Ground Stakes
Secure the Eiffel Tower to the ground using the Ground Stakes (G).