Home Accents Holiday TY625-1711-1 User manual

USE AND CARE GUIDE
5 FEET LED SNOWMAN with BROOM
THANK YOU
We appreciate the trust and confidence you have placed in Home Accents through the purchase of this 5 Feet LED
SNOWMAN with BROOM. We strive to continually create quality products designed to enhance your home. Visit us
online to see our full line of products available for your home improvement needs. Thank you for choosing Home
Accents!
Guarantee
What is Covered
The product is intended for residential seasonal use for approximately 90 days per year. This product is covered by a 90
days limited guarantee due to defects in material and workmanship. Return the product with purchase receipts to the
location of purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in accordance with directions
provided on or with the product, burn out of bulbs or LEDS, batteries, products that have been subjected to
unauthorized repair and/or modification and damage caused by shipping and improper handling, alterations, misuse or
accidents. Questions, problems, missing parts? Before returning to the store, call Home Accents Holiday Customer
Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
Pre-Assembly
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Read the entire manual prior to assembly
and identify all the parts included in the package against the parts list. If any parts are missing or damaged do not
attempt assembly. Contact our customer service center or return to place of purchase with proof of purchase receipt.
Assembly of this product may require more than one person.
PACKAGE CONTENTS
SKU # 1002 494 405
YOW SKU# 763 807
Model # TY625-1711-1
Package Contents/Parts List
Part Description Quantity
A Hat 1
B Head 1
C Nose 1
D Halves of Upper Body 2
E Halves of Lower Body 2
F Arm/Hand 2
G Scarf 1
Package Contents/Parts List
Part Description Quantity
H Broom Head 1
I Broom Handle 1
J Ground Stake 4
K Plastic Tie 10
L Spare Fuse 1
M Spare Bulb 5
C
B
A
D
E E
F
I
H K
L
M
J

Assembly
Assembling the SNOWMAN with BROOM
Step 1. Align the two halves of the Lower Body (E) with each other and align the two halves of the Upper Body (D) with
each other then insert the connecting rods on one half into the holes on the other half. Fasten with Plastic Ties (K).
Stand the Lower Body (E) section in an upright position. Insert the metal connecting rods attached to the bottom of the
Upper Body (D) into the matching holes on the top of the Lower Body then fasten them together with Plastic Ties (K).
(FIG.2)
Step 2. Insert the connecting rods on the bottom of the Head (B) into the holes on the top of Body then fasten with
Plastic Ties (K). Insert the connecting rod of Nose (C ) into the matching hole on the Head and fasten with Plastic
Ties(K) (FIG.2)
Step 3. Insert the connecting rod on the bottom of the Hat (A) into the matching hole on the top of the Head (B)
and insert the connecting rod on each Arm/Hand (F) into the matching holes on the Upper Body and fasten them
with Plastic Ties (K). (FIG.3).
Step 4. Insert the connecting rod on Broom Head (H) into the matching holes on the Broom Handle (I). Insert the
connecting rod of Broom Handle (I) into the matching hole on the Arm/Hand(F). (FIG.4)
Step 5. Wrap the Scarf (G) around the neck of the Snowman. (FIG. 5)
Step 6. Secure the Snowman to the ground with the Ground Stake (J). (FIG.6).
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 12 Watts (0.1Amps). Do not overload.
Do not connect to other lighting strings, decorative outfit or other electrical products. Before you use or re-use this
product inspect it carefully. Return to place of purchase or consult a certified Electrician if the product has cuts, damage
or frayed wire insulation on cords, cracks in the socket enclosures, loose connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any undue strain or stress on the
product, wire and lighting connections. If the product is placed somewhere other than the ground it should be well
secured and stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.3 FIG.4
FIG.5 FIG.6
FIG.1 FIG.2