Home Accents Holiday TY364-1411 User manual

OMS THD SKU#1000 575 995
Model # TY364-1411
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 5ft 200 Light LED Snowman with Hat. We strive
to continually create quality products designed to enhance your home. Visit
us online to see our full line of products available for your home decoration
needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
5ft 200 Light LED Snowman with Hat
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 12 Watts (0.1
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product, inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Head 1
B Halves of Upper
Body 2
C Halves of Lower
Body 2
D Arm 2
E Hat Brim and Top 2
Hardware List
Locater Name Qty.
F Ground Stakes 4
G Plastic Tie 10
H Spare Fuse 2
I Spare Bulb 5
F G H I
B
C
E
A
D

A
SSEMBLY
1 Assembling the Upper and Lower Body
Align the two Halves of Lower Body (C) and insert the connecting rods
on one Half into the connecting holes on the other Half.Align the two
Halves of Upper Body (B) and insert the connecting rods on one Half
into the connecting holes on the other Half. Fasten together at the
connecting loops with Plastic Ties (G).
2 Assembling the Head to the Body
Stand the Lower Body (C) section in an upright position. Insert the metal
rods attached to the bottom of the Upper Body (B) into the connecting
holes on the top of the Lower Body and fasten the sections together at the
connecting loops with Plastic Ties (G). Insert the metal connecting rods on
the bottom of the Head (A) into the connecting holes at the top of Body
then fasten them together with Plastic Ties (G).
3 Assembling the Arms to the Body
Insert the metal connecting rods on each of theArm (D) into the
Connecting holes on the Upper Body (B). Secure the Body together at
the connecting loops with Plastic Ties (G).
4 Assembling the Hat on Top of the Head
Place the Hat Brim (E) on top of the Head then place the Hat Top (E) on top
of the Brim and make sure the connecting rods on the Hat Top go thru the
holes on the Brim and into the matching holes on top of the Head (A).
5 Securing the Snowman to the Ground & attaching Scarf
Attach the Scarf around the Snowman’s neck to desired look. Secure the
Snowman to the ground by placing the Ground Stakes (F) at four points
on the base of Snowman over the metal frame then into the ground.