Home Accents Holiday TY174-1711 User manual

OMS THD SKU#1002 455 721
Model # TY174-1711
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 63in 160 Light LED WHITE ACRYLIC DEER.
We strive to continually create quality products designed to enhance your
home. Visit us online to see our full line of products available for your home
decoration needs. Thank you for choosing Home Accents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
63in 160 Light LED WHITE ACRYLIC DEER
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 9.6 Watts (0.08
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product, inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Antler 2
B Head/Neck 1
C Ear 2
D Body 1
E Front Leg 2
F Hind Leg 2
G Tail 1
Hardware List
Locater Name Qty.
H Ground Stakes 4
I Plastic Tie 10
J Spare Fuse 2
K Spare Bulb 4
H I J K
B
A
C
FE
D
G

A
SSEMBLY
1 Assembling the Legs to the Body
Insert the metal connecting rods attached to each Leg (E&F) into the
Matching holes on the underside of the Body (D) and fasten them
together at the connecting loops with Plastic Tie (I). The Legs come with
metal bars attached to stabilize the Deer. Insert the hooked end of the
metal bars into the metal nut on the opposite Leg.
2 Assembling the Head and Tail to the Body
Insert the connecting rod on the Tail (G) into the connecting hole on the rear
of the Body. Insert the connecting rods on the bottom of the Head/Neck (B)
into the connecting holes on the front of the Body.
Note: Be sure to attach the Decorative Collar around the neck before you
attach the Head/Neck to the Body.
3 Assembling the Antlers and Ears to the Head. Securing
the Deer to the Ground
Insert the connecting rods on both the Antlers and the Ears (A & C) into
the matching holes at the top of Head (B) and fasten with Plastic Tie (I).
Note: The ears go to the outside of the Antlers. Secure the Deer to the
ground with Ground Stake (H) by placing the Ground Stakes through
each hoof then over the metal frame and into the ground.