Home Accents Holiday TY411-1911 User manual

SKU # 1004 391 980
OMS THD SKU # 1004 254 832
Model # TY411-1911
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 6ft Polar Wishes LED Angel with Star. We
strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
6ft Polar Wishes LED Angel with Star
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground
versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center.
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 12 Watts (0.1
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Trouble Shooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse, in store display models or accidents. Questions, problems, missing parts?
Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6
p.m., EST, Monday-Friday
Diagram of Parts
Parts List
Locater Name Qty.
A Halo 1
B Hair 1
C Head/Body 1
D Upper Halves of Gown 2
E Lower Halves of Gown 2
F Wing 2
G Arm 2
H Star 1
I Bow 1
Hardware List
Locater Name Qty.
J Spare Fuse 2
K Spare Bulb 5
L Ground Stake 4
M Plastic Tie 20
Download the free BILT app on any
mobile device and access easy 3D
interactive instructions to assemble
this product.
A
B
C
D
E
FGH
I
J
K
L
M

A
SSEMBLY
1 Assembling the Lower Gown
Align the two halves of the Lower Gown (E) with each other then
insert the connecting rods on one half into the connecting holes on
the other half and fasten together at the connecting loops with Plastic
Ties (M).
2 Assembling the Upper Gown
Align the two halves of the Upper Gown (D) with each other then insert
the connecting rods on one half into the connecting holes on the other
half and fasten together at the connecting loops with Plastic Ties (M).
3 Assembling the Head/Body and Gown
Insert the connecting rods on the bottom of the Upper Gown (D) into
the connecting holes on the top of the Lower Gown (E) and fasten
together at the connecting loops with the Plastic Ties (M). Insert the
connecting rods on the bottom of the Head/Body (C) into the connecting
holes on the top of the Upper Gown (D) and fasten together at the
connecting loops with Plastic Ties (M).
4 Assembling the Wings to the Body
Insert the connecting rods on each Wing (F) into the matching connecting
holes on the back side of the Body (C).
5 Assembling the Arms and Hair
Insert the connecting rods on Hair (B) into the connecting holes on the
top of the Head / Body (C) then insert the connecting rods on eachArm
(G) into the matching connecting holes on the sides of the Body.
6 Assembling the Halo and Star
Attach the connecting rod on the Halo (A) into the connecting hole at
the back side of the Hair (B). Insert the connecting rod on the Star (H)
into the connecting hole on the Right Hand (G).
7 Assembling the Bow to the Body and Securing the Hands
Wrap the Bow (I) around the Waist of the Angel. Fasten the Arms (G)
together at the connecting loops with Plastic Tie (M).
8 Assembling the Ground Stakes
Insert the Ground Stakes (L) over the metal frame loops at the base of
the Angel then into the ground firmly.
E
M D
M
M D
C
E
F
C
G
B
A B
G
H
C
G
I
M
L