Home Accents Holiday TY477-1611-0 User manual

OMS THD SKU# 1001 767 083
Model # TY477-1611-0
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 65in 160 Light LED Reindeer & 46in 120 Light
LED Gold Glitter and Silver Sleigh. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line
of products available for your home decoration needs. Thank you for choosing
Home Accents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
65in 160 Light LED Reindeer & 46in 120 Light
LED Gold Glitter and Silver Sleigh
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 9.6 Watts (0.08
Amps) for Reindeer and rated at 7.2 Watts (0.06 Amps) for Sleigh. Do not overload.
Do not connect to another lighting string, decorative outfit or other electrical
products. Before you use or re-use this product inspect it carefully. Return to place of
purchase with purchase receipt or discard if the product has cuts, damage, frayed
wire insulation on cords, cracks in the socket enclosures, loose connections or
exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Antler 2
B Head/Neck 1
C Ear 2
D Body 1
E Front Leg 2
F Hind Leg 2
G Tail 1
H Front/Rear/Seat
Panel 3
I Side Panel 4
J Runner 4
K Decorative Runner
Cap 2
L Bow 2
Hardware List
Locater Name Qty.
M Ground Stake 8
N Plastic Tie 20
O Spare Fuse 4
P Spare Bulb 7
M N O P
L
H
A
B
E F
C G
K I
J
D

A
SSEMBLY
1. Assembling the Legs to the Body
Insert the metal connecting rods attached to each Leg (E&F) into the
matching holes on the underside of the Reindeer Body (D) and fasten
them with Plastic Tie (N). The Legs come with metal bars attached to
stabilize the Deer. Insert the hooked end of the metal bars into the metal
nut on the opposite Leg.
2. Assembling the Tail to the Body
Insert the connecting rod on the Tail (G) into the connecting holes at the
rear of the Body (D).
3. Assembling the Head / Neck to the Body
Insert the connecting rods on the bottom of the Head/Neck (B) into the
Connecting holes on the front of the Body (D) and fasten them with
Plastic Tie (N).
4. Assembling the Antlers and Ears to the Head
Insert the connecting rods on bothAntlers and Ears (A&C) into the
connecting holes at the top of Head (B).
5. Assembling the Runners
The Sleigh has 4 Runners (J). Two Front and two Rear. Insert the
connecting rods on each Front Runner into the matching holes on the
Rear Runners. Fasten with Plastic ties. Hook each Horizontal Stabilizing
Bar into the matching holes on the opposite side Runner.
6. Assembling the Decorative Runner Cap to the Front
Runner
Insert the connecting rod on the Decorative Runner Cap (K) into the
matching hole of the front of the Runners (J) and fasten them with Plastic
Tie (N).
7. Assembling the Side Panels to the Rear
The Sleigh has 4 Sides Panels (I). Two Front and 2 Rear. Insert the
connecting rods on each Front Side Panel into the matching holes on the
Rear Side Panels. Insert the connecting rods on the bottom of the Side
Panels (I) into the matching holes on the top of the Runners. Fasten with
Plastic Ties (N).
8. Assembling the Front and Back Panel to the Side Panel
Insert the connecting rods on the bottom of the Front and Back Panel (H)
into the matching holes on the top of the Seat Panel (H). Insert the
connecting rods on the top of the Front and Back Panels into the holes on
the Side Panels (I). Insert the connecting rods on the bottom of the Seat
Panel into Runners. Fasten with Plastic Ties (N).
9. Assembling the Bow to the Reindeer and Sleigh
Insert the wire tie on the Bow (L) through the holes of the material on
Reindeer and Sleigh then twist the wires together to secure.
10 Securing the Reindeer and Sleigh to the Ground
Secure the Reindeer and Sleigh to the ground with the Ground Stakes (M).