Home Accents TY090-1724-1 User manual

USEAND CARE GUIDE
60 in 80 Light LED BurlapPumpkin Scarecrow
THANK YOU
We appreciate the trust and confidence you have placed in Home Accents through the purchase
of this 60 in 80 Light LED Burlap Pumpkin Scarecrow. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing Home Accents!
Guarantee
What is Covered
The product is intended for residential seasonal use for approximately 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and workmanship.
Return the product with purchase receipts to the location of purchase for refund within 90 days of purchase
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS, batteries,
products that have been subjected to unauthorized repair and/or modification and damage caused
by shipping and improper handling, alterations, misuse or accidents. Questions, problems, missing
parts? Before returning to the store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
SKU # 1002 374 112
YOW SKU # 760 929
Model # TY090-1724-1
Pre-Assembly
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return to place of purchase with proof of
purchase receipt. Assembly of this product may require more than one person.
PACKAGE CONTENTS
Package Contents/Parts List
Part Description Quantity
A Halves of Head 2
B Halves of Body 2
C Scarf 1
D Halves of Upper Leg 2
E Lower Leg 2
F Coated Support Pipe 1
Package Contents/Parts List
Part Description Quantity
G Round Base Stand 1
H Stake 4
I PlasticTie 10
J Spare fuse 1
K Spare Fuse 2
A
F
ED
B
C
H
G
IJK

Assembly
Assembling the Scarecrow
Step 1. Align the two halves of Body (B) with each other and insert the connecting rod on one half
into the other half then fasten with the Plastic Ties (I). (FIG.1)
Step 2. Align the two Halves of Head (A) with each other and insert the connecting rod on one half
into the other half then fasten with the Plastic Ties (I). Insert the connecting rod at base of
Head into the head into the connecting holes at the top of the Body (B) then fasten with
Plastic Ties (I). (FIG.2)
Step 3. Align the two Halves of Upper Legs (D) with each other and insert the connecting rod on
one half into the other half. Insert the connecting rods on the bottom of Body (B) into the
connecting holes at the top of the Upper Legs (D). Fasten all with Plastic Ties (I). (FIG.3)
Step 4. Insert the connecting rods on the Lower Legs (E) into the holes of the Upper Legs (D) and
fasten with the Plastic Ties (I). (FIG.4)
Step 5. Insert the Coated Pipe (F) into the Round Base Stand (G) with the tapered end upwards.
Connect the Pole to the assembly hole at the bottom of the Upper Legs (D). Pose the
Scarecrow with Arms Up. (FIG.5)
Step 6. Wrap the Scarf (C) around the neck of the Scarecrow. (FIG.6)
Step 7. Insert Ground Stakes (H) into the ground at the base of the Scarecrow. (FIG.7)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 4.8 Watts
(0.04Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product conductors, connections, and wires. If the
product is placed somewhere other than the ground it should be well secured and
stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.1
FIG.2
FIG.3
FIG.4
FIG.6 FIG.7
FIG.5