Home Accents TY215-1724 User manual

SKU # 1003 081 572
OMS THD SKU # 1003 002 173
Model # TY215-1724
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 80in 120 Lights LED Haunted House. We strive
to continually create quality products designed to enhance your home. Visit
us online to see our full line of products available for your home decoration
needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
80in 120 Lights LED HAUNTED HOUSE
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 7.2Watts
(0.06Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product, inspect it
carefully. Discard or return to place of purchase with purchase receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures,
loose connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is
placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of
purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Left Spire 1
B Roof of Right Spire 1
C Middle Section of Right Spire 1
D Lower section of Right Spire 1
E House 1
F Support Bracket 1
G Left Fence 1
H Right Fence 1
I Chimney 1
Hardware List
Locater Name Qty.
J Cotter Pin 1
K Ground Stake 4
L Plastic Tie 10
M Spare Fuse 1
N Spare Bulb 3
A B C
D E F
G H I
J K L M N

A
SSEMBLY
1 Assembling the Back Cover and Side Covers to House
Fasten the Back Cover and both Side Covers to the House (E) at the
connecting loops with the Plastic Ties (L).
2 Attaching the Support Bracket to the House
Hang two connecting rods at the top of the Support Bracket (F) into the
matching holes on the back top of the House (E) and fasten them with
Cotter Pin (J). Insert the metal swivel connecting rod attached to the
middle of the Support Bracket into the matching hole on the middle of
the House (E) then fasten with Cotter Pin.
3 Assembling the Left & Right Fence
Insert the connecting rods on the Left & Right Fence (G&H) into the
matching holes on the front of the House (E).
4 Assembling the Left Spire and Lower Section of Right
Spire
Insert the connecting rods at the bottom of the Left Spire (A) and the Lower
Section of the Right Spire (D) into the matching holes on the top of the
House (E).
5 Assembling the Chimney and Securing the Spires
Insert the connecting rods on the bottom of the Chimney (I) into the
matching holes at the top of the House (E). Fasten the Left Spire and
the Lower Section of the Right Spire at the connecting loop with the
Plastic Ties (L).
6 Assembling the Middle Section and Roof of the Right Spire
Insert the connecting rods on the bottom of the Middle Section of Right
Spire (C) into the matching holes on the top of the Lower Section of
Right Spire (D) and fasten them at the connecting loops with the Plastic
Ties(L).
7 Assembling the Roof of Right Spire
Insert the connecting rods on the bottom of the Roof of Right Spire
(B) into the matching holes on the top of the Middle Section of the
Right Spire Upper (C). Fasten at the connecting loops with Plastic
Ties (L).
8 Assembling the Ground Stakes
Insert the Ground Stakes (K) over the metal frame at the 4 corners of
the House then into the Ground.