Home Accents TY116-1724-1 User manual

SKU # 1002 369 900
OMS THD SKU # 1002 304 804
Model # TY116-1724-1
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 72in 120 Light LED Animated Tinsel Ghost
Tree. We strive to continually create quality products designed to enhance
your home. Visit us online to see our full line of products available for your
home decoration needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
72in 120 Light LED ANIMATED TINSEL
GHOST TREE
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 12 Watts
(0.1Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product, inspect it
carefully. Discard or return to place of purchase with purchase receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures,
loose connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is
placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of
purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Right Hand 1
B Left Hand 1
C Front Half of Upper Section 1
D Back Half of Upper Section 1
E Front Half of Lower Section 1
F Back Half of Lower Section 1
Hardware List
Locater Name Qty.
G Cotter Pin 2
H Ground Stake 4
I Plastic Tie 10
J Spare Fuse 1
K Spare Bulb 3
A B C
D E F
G H I J K

A
SSEMBLY
1 Assembling the Lower Section
Inserted the connecting rods on the Back Half of Lower Section (F)
into the matching holes on the Front Halve of Lower Section (E) and
fasten together at the connecting loops with Plastic Ties (I).
2 Connecting the Motor to the Arms
The Motor is attached to the Back Half of Upper Section (D). Attach
the connecting rod on the left arm and the plastic bar from the motor
mandrel to the connecting metal bar from right arm then lock with
Cotter Pin (G).
3 Assembling the Front Half and Back Half of Upper Section
Insert the connecting rods on the Back Half of Upper Section (D) into
the matching holes on the Front Half of Upper Section (C) and fasten
together at the connecting loops with Plastic Ties (I).
4 Assembling the Lower Section to the Upper Section
Insert the connecting rods on the bottom of the Upper Section into the
holes at the top of the Lower Section and fasten together at the
connecting loops with Plastic Ties (I).
5 Assembling the Hands
Insert the connecting rods on the Left and Right Hands (A,B) into the
holes on the arms on the Upper Section then fasten together at the
connecting loops with Plastic Ties (I).
6 Securing the Ghost Tree to the Ground
Place the Ground Stakes (H) over the metal frame at the base of the
Ghost Tree at four points then press the Ground Stake into the
Ground.