Assembly
Assembling the Scarecrow
Step 1. Align two Halves of Body (B) with each other and insert the rod on one half into the hole
on the other half then fasten with the Plastic Ties (I). (FIG.1)
Step 2. Align the two Halves of Head (A) with each other and insert the rod on one half into the
hole on the other half then fasten with the Plastic Ties (I). Insert the rod on the bottom
of the Head (A) into the holes at the top of the Body (B). (FIG.1)
Step 3. Assemble the 2 sections of the Coated Support Pole (F) then insert the bottom into the
Round Base (G) with the tapered end up. Insert the top of the Pole into the matching
hole at the underside of the Body (B). (FIG.1)
Step 4. Insert the Arms (C) and Legs (D) into the matching holes on the Body (B). (FIG.2)
Step 5. Wrap the Skirt (E) around the waist of the Scarecrow. (FIG.2)
Step 6. Insert Ground Stakes (H) into the ground at the Round Base. (FIG.2)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 4.8 Watts
(0.04Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product conductors, connections, and wires. If the
product is placed somewhere other than the ground it should be well secured and
stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.1
FIG.2
