Home Accents TY153-1724-1 User manual

SKU # 1003 081 392
Model # TY153-1724-1
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 42in 80 Light LED Animated Tinsel Spider.
We strive to continually create quality products designed to enhance
your home. Visit us online to see our full line of products available for your
home decoration needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
42in 80 Light LED ANIMATED TINSEL SPIDER
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 9.6 Watts
(0.08Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product, inspect it
carefully. Discard or return to place of purchase with purchase receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures,
loose connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is
placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of
purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Head 1
B Body 1
C Round Base Stand 1
D Motor Vertical Pole 1
E Spider Leg 1
F Spider Leg 1
G Spider Leg 1
H Spider Leg 1
I Spider Leg 1
J Spider Leg 1
K Spider Leg 1
L Spider Leg 1
M Cross Bar 1
Hardware List
Locater Name Qty.
N Cotter Pin 3
O Ground Stake 4
P Plastic Tie 10
Q Spare Fuse 1
R Spare Bulb 2
N O P Q R
A B C D
E F G H
I J K L
M

A
SSEMBLY
1 Assembling the Body to the Round Base Stand
Attach the Motor Vertical Pole (D) to the small vertical rod on the
Round Base Stand (C) and secure with built in locking pin. Insert
the connecting rods on the top of the Motor Vertical Pole (D) into
the matching holes at the bottom of the Body (B).
2 Assembling the Cross Bar to the Motor Bar
Attach the "L" shaped end of the Cross Bar (M) into the hole on the
end of the plastic bar attached to the motor and lock with Cotter
Pin (N).
3 Assembling the Head and Connecting the Cross Bar
Insert the free end rod of the Cross Bar (M) into the connecting hole
at the back of the Head (A) and lock with Cotter Pin(N). Hang the
connecting rods at the back of the Head (A) into the tubes on the
front of the Body (B) and lock with Cotter Pins (N).
4 Assembling the Legs
Insert the connecting rods at the end of each Leg (E,F,G,H,I,J,K,L) into
the matching holes in the Head (A) and Body (B).
5 Securing the Legs to the Head and Body
Fasten each Leg (E,F,G,H,I,J,K,L) to the Head (A) and Body (B)
together at the connecting loops with the Plastic Ties (P).
6 Securing the Spider to the Ground
Place the Ground Stakes (O) over the metal frame around the Round
Base Stand at four points then press the Ground Stake into the Ground.