
3).
Assenble
finbmanpanl@).
Usethecam-tool(C1)rotate
the cam-bolts
stand
panei
(J/-ll/K), then
use
thecam-tool
(Cl) tightenthe cam-locks
(\|) clockwise
into theholes
of stand
panel(J/J1fIQ'(See
therigirt picture).
(1il) into the bottom panel @) andattach
a.)
Assanbletre
side
panl
(CiD)
d ftsf/back
lorv
papl(NM.
Insertthe dowel (Y) into the front/backlow panel${i\Q andacross
panel(E/G).
I-Tse
thecam-tool
(C1)rotate
the cam-bolts
(W) into the side
panel(ClD)andattach
the front/back low panel (NAvf and aoross
panel @/C). Then use the cam-tool (C1)
tightcns thc cam-locks (V) olockwisc into thc
bottom panel @) andback low panel Qv! and
acrosspanel @/G). Finally, rotate the sorews
(X) througlr the holes of ttont/back low panel
N/\/I) into the bottom panel @). (seethe ieft
picture).
5)Assemblethe
top
panel
(A).
Usethe cam-tool(C1)rotates
the cam-bolts
(W) into thetop panel(A) andatbaches
theside
panei
(C/D)and
stand
panel
(J/J\/K).Then
usethecam-tool
(C1)
tightens
the
camlock(V) clockwise
into the side
panel
(C,D)
and
stand
panel
(J/.rl/K).
(Seethe
right
picture).
x-.._@
\ l\{\