Home Protector 61859 User manual

Contents
Introduction..................................................... 4
Welcome....................................................... 4
General Information and Safety
Instructions ...................................................... 5
Assembly and Parts List ............................. 7
Outdoor unit ................................................ 8
Indoor unit.................................................... 9
Accessories ................................................ 10
Getting Started..............................................12
Features ..........................................................24
Instructions .................................................... 25
Replacing the batteries......................... 25
Removing the micro SD card .............. 25
Buttons ........................................................26
Take a picture from the inside............26
Take a picture using the doorbell ..... 27
Review and delete pictures ................. 27
2

Change the Date/Time ..........................28
Screen shots ..............................................29
Device timing operation .......................29
FAQ .................................................................. 30
Other Useful Information ..........................31
Disposal ........................................................31
Specifications............................................ 32
Warranty Conditions .............................. 33
Warranty card............................................... 37
3

Introduction
This Digital Door Viewer helps you to
protect yourself and your valuables. The
screen allows you to see & communicate
with whoever is at the door before
having to open it.
Welcome
You have made an excellent choice with
the purchase of this quality Home
Protector product.
By doing so you now have the assurance
and peace of mind which comes from
purchasing a product that has been
manufactured to the highest standards
of performance and safety, supported
by the high quality standards of Aldi.
We want you to be completely satisfied
with your purchase, so this Home
Protector product is backed by a
comprehensive manufacturer’s 3-year
warranty and an outstanding after sales
service through our dedicated Helpline.
4

We hope you will enjoy using your
purchase for many years to come.
If you require technical support or in the
unlikely event that your purchase is
faulty please telephone our Helpline for
immediate assistance. Faulty product
claims made within the 3 year warranty
period will be repaired or replaced free
of charge provided that you have
satisfactory proof of purchase (keep
your till receipt safe!). This does not aff
ect your statutory rights.
However, be aware that the warranty
will become null and void if the product
is found to have been deliberately
damaged, misused or disassembled.
General Information and Safety
Instructions
Read all safety information below and
operating instruction before using this
Digital Door Viewer to avoid any
damages to your device.
5

1. Do not drop, disassemble, open,
crush, bend, deform, puncture, shred,
microwave, incinerate, paint, or insert
foreign objects into this device.
2. Do not expose the Digital Door
Viewer / Camera (indoor unit) to
moisture or submerge it in liquid.
Keep it dry at all times.
3. Flat batteries should be immediately
removed from the device. Never mix
old and new batteries. Always replace
batteries in pairs.
4. Always keep the product out of reach
of babies and children, in order to
avoid any dangerous situation.
6

Assembly and Parts List
Digital Door Viewer with pre-
installed 128 MB Micro SD card
(indoor/main unit/screen)
Doorbell (outdoor unit)
Metal tube
Back plate
Adhesive tape
Screws (1 short, 2 long)
Flat tool
Micro SD Card (pre-installed)
2 x AA batteries
7

Outdoor unit
8

Indoor unit

9

Accessories
10

11

Getting Started
Remove protection foam as shown
below.
1. Remove any existing Door Viewer
from the door.
12

2. If there is no Door Viewer you will
need to drill a suitable hole, using a
5/8" (7mm) drill bit.
3. Peel off the adhesive cover on one
side of the adhesive tape and attach
it to the back of the doorbell unit.
Then peel off the adhesive cover.
13

4. Place the doorbell unit on the
outside of the door and secure it by
using the adhesive tape.
Ensure that the metal threading is
exactly in the middle of the
peephole.
5. Make sure that the connection
ribbon goes through the hole.
14

6. Peel off the tape on the back of the
mounting plate. This will help
prevent scratches on your door
when attaching the main unit.
Place the backing unit against the
door and pull the connection ribbon
through the center hole.
15

7. Pull the connection ribbon through
the center hole.
8. Use the included flat tool to twist the
metal tube clockwise until it is firmly
in place.
16

9. Press the ribbon head against the
PCB (printed circuit board) for
correct position. Please note that
the PCB is very fragile so make sure
not to press the ribbon head too
hard against the PCB.
Snap the PCB to the connection
point.
17

10. Use a screwdriver to remove the
faceplate from the main unit.
18

11. Insert two AA batteries into the unit,
ensuring that you have the correct
polarity.
Attention
For the following steps, please note that
the main connection points are vital for
the operation of the Door Viewer.
If they are note properly connected the
device will not work.
19

(Back of main unit)
12. Place the unit on the door so that
the two parts connect securely.
Ensure the units
are securely
connected
20