Home Styles 88 5661 27 User manual

Hardware List
Small
Hex Wrench
1 pc.
Four Door Storage Cabinet
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Hex Wrench
Part List
88 5661 27
1 pc.
A.
To p
1pc
B.
Shelf
2 pcs
C.
Middle Panel
1pc
D.
Base Panel
1pc
F.
Stretcher
1pc
G.
Side Panel
1pc
I.
Back Panel
1pc
H.
Side Panel
1pc
J.
Side Panel
1pc
K.
Side Panel
1pc
L.
Back Panel
1pc
M.
Door
1pc
N.
Door
1pc
O.
Door
1pc Q.
Handle
4 pcs
Assembly Screw
20 pcs.(+1 extra)
Key
2 pcs.
Adjustable Pin
8 pcs.(+1 extra)
Wood Screw
4 pcs.(+1 extra)
Tools required for assembly : Phillips screwdriver
Wood Screw
for Door
24 pcs.(+1 extra)
E.
Stretcher
1pc
Wood Screw
for Handle
4 pcs.(+1 extra)
Indoor / Outdoor
P.
Door
1pc
Tools required for assembly : Tools recommended for assembly :Phillips screwdriver Level
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319

Assembly Instructions 2/4
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
Assembly Screw
L
F
J
K
E
D
STEP 1
Attach Back Panel (L), Base Panel (D) and
Stretchers (E), (F) to Side Panel (J) with
Assembly Screws.
Attach Side Panel (K) to the unit with
Assembly Screws.
STEP 2
Attach Back Panel (I) to Side Panel
(G), (H) with Assembly Screws.
G
IH
Assembly Screw
STEP 3
Attach Top (A) and Middle Panel (C)
to unit with Assembly Screws.
A
C
Assembly Screw
IMPORTANT
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Assembly Screw

Assembly Instructions 3/4
STEP 4
STEP 5
Attach unit to unit with Wood Screws.
Insert Adjustable Pins into side panels
at desired level.
Place Shelves (B) into position.
Adjustable Pin
STEP 6
Attach Doors (M), (N), (O) and (P) to unit with
Wood Screw for Door. (see Figure 1)
Wood Screw
B
B
Figure 1
Wood Screw for Door
M
O
N
P

Assembly Instructions 4/4
STEP 7
Attach Handle (Q) to unit with Wood Screw for Handle.
Move the door catch up then turn left to lock the door and turn right
then pull down to unlock. (see Figure 2)
Turn key counter clockwise to lock the door and clockwise to unlock. (see Figure 3)
Handle (Q)
Wood Screw for Handle
Figure 3
LOCK OPEN
Figure 2
Key
LOCK
UNLOCK
Key
door catch
STEP 8
To level the unit, adjust the adjustable
levelers on the bottom of legs. (see Figure 4)
Figure 4