Home 8507086 User manual

Slide for midsleeper - White
Dimensions
Length - 150cm
Depth - 124cm
Height - 112cm
Weight - 9,5kg
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@flexa.dk
Assembly Instructions - Please keep for future reference 8507086
Issue 1 - 27/06/18

1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Be aware of the danger of
young children (under 6) falling
from the slide.
• After assembly, instruct children
how to use the bed safely.
• To avoid snagging, ensure that
clothing is free of loose items
such as laces, straps, etc.
• Be careful not to leave any
obstructions around the slide.
There should be a clear space of
1 metre at the end of the slide.
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance

Short post x1
(36.8x8.9x2.0cm)
2
Components - Parts
Please check you have all the parts listed below
No. 12-02003681-20
2
Safety rail 1/2 x2
(112.7x6.5x2.0cm)
3
No. 12-02011271-20
Slide side x2
(150.8x9.0x2.0cm)
1
No. 12-02015081-20
No. 4314-161475-2
If you have damaged or missing components,
call the Customer Helpline: 0045 7668 8055
Slide base x1
(147.5x31.9x1.6cm)
4

Please check you have all the fittings listed below
3.0x20mm Chipboard screw x2
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
4.0x35mm Chipboard screw x2
B
E
6.0x60mm Chipboard screw x2
C
D
Components - Fittings
7.0x50mm Confirmat screw x1
3
F
6.3x50mm Assembly screw x11
No. 3909-63050
G
25x2mm Bracket x2 M5x25mm Coach bolt x4
H
M5 Nyloc nut hexagon x4
No. 3927-00005No. 3915-05025
J
ø7 Cover cap Plastic x4
i
ø10 Cover cap Plastic x2
No. 3938-00007-2 No. 3938-00010-2 K
ø12x10mm Cover cap Wood x2
No. 3939-00012-20
Tools required
Phillips
screwdriver
(medium)
Small
hammer
Allen key
4mm incl.
Flatblade
screwdriver
(medium)
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
No. 4033-004
No. 3902-60060
No. 4007-003
No. 3901-40035
No. 3901-30020
No. 3908-70050

4
Assembly Instructions
Step 1
Remove the support
list (1.) by removing the
fittings (a.).
Remove the safety rails
(2.) by removing the
fittings (b.).
Attach the safety rails
3to the ladder side (3.)
with fittings (b.).
3
(a.)
(b.)
(b.)
(2.)
(2.)
3
(1.)
(3.)
(b.)
(b.)
(b.)
(a.)
Step 2

Assembly Instructions
Step 3
a:Attach the short post
2to the safety rails 3
with assembly screws F
and confirmat screw E.
b:Attach the short post
2to the bed side (4.)
with chipboard screws C
and cover with cover cap
K.
Attach brackets Dto the
slide base 4with coach
bolts Gand nyloc nuts
H.
Attach slide side 1to
the slide base 4with
assembly screws F.
5
1
(4.)
E
F
3
3
C
a: b:
G
G
F
F
F
F
F
F
F
F
HD
D
1
4
2
2
2
33
E
F
C
F
D
G
H
K
K
Step 4

A
Assembly Instructions
If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055
E-mail: order@flexa.dk
Ref.no. 44-01358-20 A Stand: 270618 Page 7 (82-40016-20)
Attach the slide with the
brackets Dto the bed
side (4.) with chipboard
screws A.
Attach support list (1.) to
the safety rails 3and
bed side (4.) with the
fittings (a.).
Attach slide side 1to
the short post 2with
chipboard screws B.
Assembly is complete.
Step 5
6
(a.)
A
33
(4.)
B1
Step 6
2
(1.)
B
A