
SAFETY AND CARE ADVICE
This product has been designed for non-professional, domestic use only.
Dispose of all packaging components correctly and responsibly and in accordance with all local laws and
regulations. Never leave packaging components within reach of children, as they can be a source of danger.
Before inserting or replacing a bulb, ensure the power is switched o and the bulb has cooled down.
Do not modify any product before or after installation. This may render the product unsafe.
WARNINGS
This product is not intended for use by persons (including children) with reduced physical, sensory and
mental capabilities, or lack or experience and knowledge, unless they have been given supervision or
instruction concerning the use of the product by persons responsible for their safety.
Children should be supervised to ensure that they do not play with the product.
Do not place this fitting in a damp atmosphere.
CARE AND MAINTENANCE
Always disconnect the power supply when servicing or cleaning.
Use a clean, soft, dry or slightly damp cloth for cleaning this product.
Do not use abrasive cloths or polishes, as this may cause damage to the product.
CHANGING BULBS
This product requires 1 x 6W max. E14 LED Candle bulb (bulb not included).
Ensure that the power supply has been disconnected and the bulb has cooled down before replacing.
PARTS LIST
Table lamp x 1
Glass shade x 1
ASSEMBLY
Step 1 Carefully screw the shade onto the lamp holder. Take care not to over tighten.
Step 2 Insert the bulb into the lampholder.