Homebase RUDOLPH RATTAN EFFECT LED REINDEER User manual

INSTRUCTION MANUAL
Important! Please read these instructions before using the product. Retain instructions for future use.
HHGL Limited, MK9 1BA, HHGL (ROI) Limited, D02 X576.
RUDOLPH
RATTAN EFFECT
LED REINDEER

Caution
• For indoor or outdoor use. Always place the plug into an indoor mains socket or a weatherproof outdoor socket.
• Always unwind the cord before use. Do not connect the product to the power supply whilst the product is still in the packaging.
• This light set is constructed with non-replaceable LED bulbs, DO NOT attempt to replace any of the LED bulbs in the light set.
• This product is intended for occasional decoration only, not to be used by children as a toy and not intended for household illumination.
• It is normal for the transformer to run a little warm, please ensure it's used in a well ventilated area.
• Keep away from sources of heat and naked flames.
• Unplug when not in use.
• Always unplug from the mains supply whilst installing, carrying out maintenance or adjustments.
• The external flexible cable or cord of this light set cannot be replaced; if the cord is damaged, the light set must be destroyed.
• Use only with the supplied transformer.
• When storing away, make sure the area is dry. Avoid any damp, wet and humid areas.
• Please read these instructions carefully. Keep these instructions in a safe place for future reference.
Before you start
1. Study the “Caution” section carefully.
2. Decide on an appropriate location for your product. Make sure that you have plenty of space, a level surface, and a clear dry area for
3. Check the pack and make sure you have all of the parts.
4. Remove all plastic packaging materials and dispose of them safely.
assembly, then locate. Always try to assemble the product as close as possible to the intended location.
Assembly
Step 1 Step 2 Step 3
Assemble the deer head (1)
into the deer body (2). Fasten the deer head (1) and deer body (2). Rotate the C-shaped buckle
on the deer head (1) downward, and
press the wire on the neck of the deer
body (2) tightly.
Assembly complete.
If you position outdoors, please
use the stakes (4) provided and
fix them into the ground.
Assembled dimensions
No. Parts list Qty
1
2
3
4
Deer head
Deer body
Transformer
Ground stake
1
1
1
4
Parts list
Rated input: 9V DC Max. 3.6W
Bulb rating: 2.8-3.6V/20mA
Transformer:JT-DC9V3.6W-E3
Product specifications
120cm
75cm
28cm

Operating instructions
1. Unpack the product from the box.
2. Choose a location to position the product. Please ensure it's stable, then use the stakes provided to secure it in place.
3. Connect the power transformer to the product and plug the power transformer into the mains socket.
4. Unplug the power transformer when not in use.
Care and use
Disassembly and storage
Before using or re-using the silhouette light, inspect the product carefully. If there are any damaged parts or exposed sharp points, please dispose of
the silhouette light.
to be collected and recycled at end of life. Users of
separate collection facilities available.
aged to minimise any potential effects on the
Disposal and recycling
Electrical products are labelled with the wheelie bin symbol to indicate that they are
electrical products should not dispose of them as unsorted municipal waste but use the
Check with your local authority for recycling advice. Customer participation is encour
environment and human health, from the potential presence of hazardous substances.
Before storage, please repack the product as follows to avoid damage.
1. Gently lift off each section of the silhouette light.
2. Carefully place the silhouette light in its box and tape it shut.
3. STORE PRODUCT IN A COOL AND DRY LOCATION. AWAY FROM SUNLIGHT AND WHERE THE TEMPERATURE DOES NOT EXCEED 40 C.
O