Homecare LBP30 User manual

Model LBP30 Smart Pulsewave Blood Pressure Monitor
Model LBP30
Smart Pulsewave Blood Pressure Monitor
INSTRUCTION MANUAL
Shenzhen RSP Medical Technology Co., Ltd

Model LBP30 Smart Pulsewave Blood Pressure Monitor
Dear Customer,
Thank you for purchasing the LBP30 Smart Pulsewave Blood Pressure
Monitor. In order to use the device correctly and efficiently, please read this
Instruction Manual before use. In addition, please take good care of the manual
after your reading to ensure you can find it easily when necessary.
Visual number: V1.1.0
This product is suitable for people who are older than 12 years of age in
hospital, clinic and social medical organizations etc.

Model LBP30 Smart Pulsewave Blood Pressure Monitor
CONTENTS
SAFETY PRECAUTIONS ..........................................................................................4
COMPONENTS OF THE PRODUCT..........................................................................6
RECHARGE THE BATTERY....................................................................................... 7
APPLYING THE CUFF...................................................................................................8
POSTURES INSTRUCTIONS........................................................................................8
SETTING UNITS.............................................................................................................. 9
TAKING A MEASUREMENT.....................................................................................10
CARE AND MAINTENANCE..................................................................................... 12
ERROR INDICATORS..................................................................................................12
TROUBLESHOOTING TIPS.......................................................................................12
PRODUCT SPECIFICATIONS................................................................................... 13
APPENDIX A: PACKING LIST..................................................................................14
APPENDIX B: EMC.......................................................................................................14

Model LBP30 Smart Pulsewave Blood Pressure Monitor
SAFETY PRECAUTIONS
The purpose of the symbols used in the Instruction as safety identifying is to
enable you use the product safe and properly, and to prevent harm to you and others
or damage to property.
SYMBOLS AND ABBREVIATIONS
WARNING
1. Contact your physician for specific information about your blood pressure.
Self-diagnosis and treatment using measured results may be dangerous. Follow
the instructions of your physician or licensed healthcare provider.
2. This product is only suitable for measuring blood pressure and pulse rate of adult,
which values are for reference.
3.
Pregnant
women,
pre-eclamptic,
mental
disorder
or
arrhythmia
patients
should
use
this device under practitioner’s guidance.
4.
When
common
arrhythmias
(such
as
atrial
premature
ventricular
premature
ventricular premature and atrial fibrillation) appear, it cannot ensure that the
blood pressure monitor will achieve the performance it claims to. It is advised to
use the product under a doctor’s guidance.
Identifiers Indications
WARNING It indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION
It indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury to
the user or patient or damage to the equipment or
other property.
Attention! Consult the manual!
BF TYPE
Internal battery

Model LBP30 Smart Pulsewave Blood Pressure Monitor
CAUTION
1. Be sure to use and purchase a dedicated double-bladder cuff, or you cannot get
accurate results.
2. Do not use a cellular phone near the device, or it may cause electromagnetic
interference, and thus result in an operational failure.
3. Relax yourself and breathe naturally before measuring, please keep quiet and
keep correct posture in measuring process. Incorrect posture (for example,
incorrect sitting posture, the height of measuring position is inconsistent with the
height of the heart) or non-quiet status (for example, limbs shaking, head and
body swing, talking and being nervous) may cause measuring results not correct.
4. Do not attempt to maintain or modify the device by yourself. Please contact the
manufacturer or authorized distributor if maintenance service needed.
5. Repeat measuring the same person with an interval of at least 1 minute, because
too frequent measurements may cause injury to you due to blood flow
interference and get incorrect measurements.
6. Double-bladder cuff should not be overly persistent, and the pressure should keep
below the value of 300mmHg, or it may cause arm blood be unable to timely
reflow.
7. Do not use the cuff when arm is wet or sweaty, please use it after wiping up.
8. Do not subject the monitor or the AC adapter to strong shocks, such as dropping
on the floor, otherwise it may damage the unit.
9. Do not soak the unit or cuff in water.
10. Operate the device only as intended. Do not use the device for any other purpose.
11. Do not store or use this device outside the specified temperature or humidity
range, or it may not achieve the claimed performance.
12. If the monitor and battery achieved longevity, do not arbitrarily discard them,
they should be processed according to the local environmental protection
regulations in order to avoid environmental pollution.
13. The cuff and Li batteries are classified as consumables.
14. The cuff still meets safety and performance requirements after cycle use for
10000 times; Li batteries capacity will decrease after charge-discharge for 300
times.
NOTES:
1. When in idle state (the 2nd process of measuring blood pressure), press the button
“ ” for about 5 seconds, the blood pressure monitor will enter in “P mode” for
measuring. In this state, users have two methods of exit: a. Press the button “ ” for
about 5 seconds; b. Wait for 15 to 20 seconds to automatically exit (no-operation),
users please don’t do this operation if unnecessary.
2. Calibration should be made every three years. It should be sent back to Shenzhen
RSP Medical Technology Co., Ltd or its authorized distribution for calibration.

Model LBP30 Smart Pulsewave Blood Pressure Monitor
Otherwise the device may reach less than the claimed accuracy.
COMPONENTS OF THE PRODUCT
Main unit:
Display:
Systolic
blood
pressure
Measurement
d
ata
Pulse rate
Diastolic blood pressure Unit

Model LBP30 Smart Pulsewave Blood Pressure Monitor
DualCuff: (Applicable arm circumference: 22cm-32cm)
RECHARGE THE BATTERY
1. When the screen displays “LOP”, it means low battery, please recharge it in time;
2. Press the button “ ” to turn on the device, “- 0 -” flashing indicates the battery is
low, in this state can complete the measurement, please recharge in time after the
measurement.
3. In charging process, the charging indicator light is orange; when the battery
has been fully charged, the charging light indicator turns green.
CAUTION
1. Please use the standard power adapter (5V-1A) or other power supply equipment
(5V-1A) to recharge products.
2. In the process of charging, please do not use the product; please do not plug in the
power adapter with wet hands.
Connect to upper bladder
Connect to lower bladder
The arrow directs down.

Model LBP30 Smart Pulsewave Blood Pressure Monitor
3. If the product was not operated for 3 months, please store the device with fully
charged battery.
APPLYING THE CUFF
1. When measuring, take off the thick garments and keep the upper arm bared. Thin
clothing does not affect the measurement if it does not take pressure to the arm.
2. Put your arm through the cuff loop with the monitor installed on the cuff be at the
middle of the arm. After placing the cuff correctly, straining the tail of the cuff to
fasten the cuff.
NOTES:
1. Do not put your thick clothes into cuffs, and the bottom of the cuff should be
approximately 1cm above the elbow.
2. It will get an incorrect result when the cuff is applied too tightly or too
loosely, it is advisable to put in a finger, that is to say, a finger can be put in
freely between the cuff and arm.
POSTURES INSTRUCTIONS
1. Sit in a chair with your feet flat on the floor.

Model LBP30 Smart Pulsewave Blood Pressure Monitor
2. Place your arm on the table so that the cuff is at the same level as your heart.
3. Be relaxed and breathe normally before measurement.
NOTE:
Your arm cuff and heart should be on the same level; otherwise, measurement
accuracy will be affected.
SETTING UNITS
In shutdown status, press and hold the button “ ” for over 5 seconds to enter unit
setting mode. When “mmHg” displays on the screen, it means the unit is “mmHg”; if
“kPa” displays on the screen, it means the unit is “kPa”.

Model LBP30 Smart Pulsewave Blood Pressure Monitor
NOTE:
If you need to reset the units, you must turn the monitor off, then operate the unit
according to the above steps.
TAKING A MEASUREMENT
This monitor has two different units optional: mmHg and kPa. The default unit is
“mmHg”. The following interpretation take “mmHg” for example.
Users should try to relax the body before measurement, and then sit for 2-3 minutes.
Users are advised to be measured at the same time daily.
1. Apply the DualCuff correctly (refer to the section “APPLYING THE DUAL
CUFF”) and set right measuring postures (refer to the section “POSTURES
INSTRUCTIONS”). Do not move your hands in the process of measurement.
2. Press the button “ ” to start the monitor, and then it shows “-0-”, thus enter
standby mode.
3. Press the button “ ” to take a measurement.
4. When the screen shows the error code of “EE” during inflation process, Please
consult the “ERROR INDICATORS”.
5. After the bladder inflated successfully, the monitor begins to test the pulse wave.