HOMEDEPOT PP191618 User manual

~1~
Operation Instructions
PP191618
Lift Chair

~2~
Operation Instructions
Plug the direct current end of the cord into the AC Adapter outlet, then insert
the AC adapter plug into a wall outlet for power.
Press the button to recline the chair back and foot-rest.
Press the button to return the chair back and foot-rest to their original
position. Push the button a second time to lift the entire chair.
Press the button to lower the chair and return it to the original position.
ELECTRIC LIFTING & RECLINING

~3~
Power Reclining
Power Lifting
When using an electrical appliance, basic precautions should always be
followed, including:
Always unplug the lift chair from the power source after use, and before
cleaning.
Do not touch lift chair if large amounts of liquid have spilled on it.
Unplug immediately.
The chair should never be left unattended when plugged in. Unplug
from the outlet when not in use or before putting on or taking off parts
or attachments.
Do not use outdoors.
Do not carry this appliance by the attached power cord; do not use it as a
handle.
Keep the cord away from heated surfaces.
Close supervision is necessary when this appliance is used by or near
children, invalids or disabled persons.
This unit is not a toy. Children should not use or play with it.
Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
Do not use near eyes or other highly sensitive areas.
To disconnect, press the OFF button, make sure all functions are
stopped, then remove the plug form the outlet.
Use this appliance only for its intended use as described in this manual.
Do not use attachments that haven’t been provided with the unit. This
appliance is not intended use for persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety,
children should be supervised to ensure that they do not play with the
appliance.
PRODUC TFEATURES
IMPORTANT SAFETY INSTRUCTIONS

~4~
HEALTH CAUTION
MAINTAINANCE INSTRUCTIONS
If you have any concerns regarding to your health, consult your doctor
before using this product.
Individuals with pacemakers should not use this product.
If you have pain in a muscle or joint after using for a prolonged period
of time, discontinue using and consult your doctor. Persist pain could be
a symptom of a more serious condition.
TO STORE:
Place unit in its box or safety dry and cool place. Avoid putting
chair in contact with sharp edges or pointed objects which might
cut or puncture the fabric. Do not wrap attached power cord around
the unit. DO NOT pull the unit by power cord.
TO CLEAN:
Ensure the unit is unplugged from the power source, and allow the
unit to cool down before cleaning.
Do not use any liquid to clean. Clean fabric cover by wiping with
a damp sponge, using a mild detergent or suds. Pat with clean, dry
cloth.
Do not use any abrasive cleaners, brushes, gasoline, kerosene,
glass furniture polish, paint thinner or water hotter than 120︒F to
clean the unit.

~5~
OPERATING INSTRUCTION
TECHNICAL SPECIFICATIONS
Model: PP038535DAA
Rated Voltage :100V-240V~
Rated Frequency :50Hz/60Hz
Press the button to make the sofa lifted.
Press the button to recline the sofa.

~6~
Assembly Instructions
GENERAL ASSEMBLY INFORMATION GUIDE
Please read the following instructions prior to assembling this product:
1. To avoid damage, assemble this product on a non-abrasive surface such
as carpet.
2. Make sure all bolts are tightly fastened before use.
3. For home use or light commercial use only.
4. Please make sure you have all parts before assembly.

~7~
Parts List
A
B
C
QTY 1 pc
QTY 1pc
QTY 1 pcs
D
E
F
QTY 1 pc
QTY 1 pc
QTY 1 pcs
G
QTY 1 pcs

~8~
Step 1
1Place the Seat (A) on its back on a flat smooth surface.
Take out the bag which holds a rectangle box.
2Take out the transformer (E 1pc) &weir plug (G 1pc) & remote control (C
1pc) from the rectangle carton box.

~9~
Step 2
Attach backrest (B) to main frame (A) by aligning the metal grooves on
backrest to brackets on the main frame as shown.
Ensure the backrest (B) slides down fully over the brackets on the main frame
(A).

~10 ~
Step 3
Attach ears (F&G) for backrest to backrest (B) by aligning the metal
grooves on two ears to brackets on the backrest as shown.