HOMEDEPOT DS-10002 User manual

Questions, problems, missing parts?
Before returning to the store, call Customer Service
8 a.m. - 5 p.m., EST, Monday-Friday
1-877-527-0313
HOMEDEPOT.COM
29IN CASTING LEGS FIRE PIT
Item #XXX-XXX
Model #DS-10002

Table of Contents
Assembly of fire pit ...................................................... 5
Operation .......................................................................6
Care and Cleaning ........................................................ 6

Warranty
This product carries no warranty. No replacement parts are available.
If there are any questions, contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.
AA M6x20 bolt 8
BB M6x15 bolt 4
CC M6 nut 1
DD Allen key 1
DD
3 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.

A Cover handle 1
B Mesh cover 1
C Log grate 1
D Bowl 1
E Stand ring 1
F Leg connector ring 1
G Leg 1
H Hook 1
PACKAGE CONTENTS
A
B
C
D
E
F
G

Assembly of fire pit
Attaching the legs
Place the stand ring (E) on a soft, flat surface and align the
bolt holes on the legs (G) with the holes on the stand
ring (E).
Loosely secure the legs (G) to the stand ring (E) with
bolts (AA).
AA
AA
Place the leg connector ring (F) between the legs (G) and
insert bolts (BB) through the leg connector ring (F) and into
each leg (G).
Once all of the bolts (AA & BB) are in place and the stand
assembly is aligned properly, tighten all bolts (AA & BB)
with the Allen Key (DD).
Attaching the leg connector ring
Assembling the bowl and log grate
Carefully turn the stand assembly to the upright position
and place the bowl (D) into the stand.
Place the log grate (C) into the bowl (D).
3Assembling the mesh cover
Attach the cover handle (A) to the mesh cover (B) by
inserting the cover handle (A) through the top of the mesh
cover (B) and securing with a nut (CC).
Tighten the nut with a wrench (not included).
Carefully place the assembled cover (B) On the bowl (D).
The fire bowl is ready for use.
4
BB
BB
F
CC
5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.

Once the fireplace is completely cooled down, remove the mesh cover using the handle. Pour the ashes from the bowl and rinse
with clean water and allow to dry completely.
Clean after each use.
Do not use a scrub brush.
If the paint chips, use only high-temperature paints and a brush to fix.
If rust is showing, sand lightly and repaint the area with high-temperature paints.
Dry with a soft cloth.
Turn the unit upside down when not in use to prevent water from collecting.
Cover the unit when not in use to prolong the life.
Keep your firepit out of rain.
Do not place the tray top when fire pit in use.
Care and Cleaning
Operation
Use the hook (H) to lift the handle (A) on the mesh cover (B)
and carefully add wood while the fire is burning.
Use the hook (H) to carefully replace the mesh cover (A)
back onto the bowl (D).
Adding wood to an existing fire
Starting a fire
WARNING: Do not use large logs. Do not overload the fire
bowl beyond 6 to 8 pounds.
WARNING: Do not use charcoal or an artificial log.
CAUTION: Keep the fire at a reasonable level as large fires
can damage or shorten the life of the unit.
WARNING: Do not use gasoline or kerosene to start a fire.
Place three to four sheets of crumpled newspaper on top
of the fire log grate (C).
Pile finely-split, dry firewood on top of the loosely
crumpled newspaper.
Carefully light the loosely crumpled newspaper
underneath the firewood and carefully replace the mesh
cover (A) using the hook (H).
7 HOMEDEPOT.COM
H
A
D
A
H
B
B

Questions, problems, missing parts?
Before returning to the store, call Customer Service
8 a.m. - 5 p.m., EST, Monday-Friday
1-877-527-0313
HOMEDEPOT.COM
Handcrafted by artisans in India
Retain this manual for future use.