HoMedics Mirra OCEANSIDE User manual

www.homedics.com US: 1-800-466-3342 CAN: 1-888-225-7378 IB-WFL420
OCEANSIDE
WFL-420
PARTS AND PIECES
REGISTER YOUR FOUNTAIN
Registering your fountain secures the benefits of
your warranty (even if you lose your receipt). It
also makes it easier for us to assist you if you ever
have an issue with your product.
www.homedics.com/product-registration
A – Fountain top
B – Fountain bottom
C – Pump
D – Adapter
E – Rocks
E
UNIQUE FEATURES AND SPECIFICATIONS
Natural water sounds
Soothing sounds create a relaxing ambience.
Unique lighting
Warm glow enhances any environment.
Convenient tabletop size
12.4” x 8.66” x 5.12” for an easy fit on most surfaces.
Adapter voltage
120 VAC, 60Hz
You no longer have to journey for a relaxing natural
experience. A Mirra soothing fountain from HoMedics
lets you connect to that same elemental calm by
bringing the sounds of the outdoors into your personal
setting. The running water puts your mind at ease on a
subconscious level, allowing you to regroup and retreat
from the busy world. And the fountain’s pleasing shape
and surrounding stones remind us of what’s important.
Eternal. Unchanging.
A
B
C
D

www.homedics.com US: 1-800-466-3342 CAN: 1-888-225-7378 IB-WFL420
HOW TO USE
Instructions
1. Familiarize yourself with the pump. The switch located at the
front of the pump controls the pump speed. The speed is
indicated by a plus (+) and minus (-) sign. To increase the
speed, move the switch slowly to the left in the direction of
the plus sign. At its highest speed level, the switch will cease
to move any farther. To decrease the pump speed for less
water flow, move the switch to the right toward the minus
sign. Similarly, at its lowest speed, the switch will cease to
move any farther.
2. Connect the male and female parts of the LED light connector
and twist cap tightly.
3. Insert the tube into the pump.
4. Fill the base with water up to the fill line. Keep the water filled
to the suggested level at all times for optimum performance.
5. Set the fountain top onto the base.
6. Rinse the rocks with water. Arrange the rocks on
the platform.
7. Attach the AC adapter jack to the base power cord.
DO NOT plug into an outlet at this time.
8. Set the fountain on a level, waterproof surface.
9. Plug the cord into a 120-volt household outlet. The switch
located on the power cord controls the fountain. If the pump
doesn’t operate, click the power button once to turn the
fountain on and once more to turn off.
NOTE: Ensure that the electrical cord loops below the
electrical outlet to form a "drip loop." This will prevent water
from running down the cord into the electrical outlet.
10. For the best results, operate with the pump completely
submerged. Keep the water level at the fill line at all times.
TO CLEAN
1. To clean the pump: Unplug from the electrical outlet. Use a
small brush or stream of water to remove any debris.
2. To keep water clean: Periodically change water and clean
the product according to the water condition. Over time,
fountain water and the fountain itself become dirty. We
suggest cleaning and exchanging water weekly to increase
the longevity of the fountain.
3. To clean off hard water deposits on the base: Soak the base
in a mixture of vinegar and water to clean and remove any
mineral buildup.
4. Keep water at an optimum level: Add water periodically to
keep it at an optimum level to avoid shortening the life of the
pump. Never let the pump run dry.
5. Fountain storage: Unplug the fountain from the electrical
outlet, empty the water, dry the fountain, and store rocks
and fountain in a cool, dry place.

www.homedics.com US: 1-800-466-3342 CAN: 1-888-225-7378 IB-WFL420
WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN
CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING.
• Always place fountain on a firm, flat surface. Due to
the imperfect edges that are inherent to our natural
stone fountains, water may splash outside the base
of the unit. Therefore, we strongly recommend that
you place your fountain and fountain parts on a
waterproof surface or that you cover the surface
with a waterproof barrier.
• DO NOT place on any surface that can be damaged
by water.
• DO NOT reach for a unit that has fallen into water.
Unplug it immediately.
• DO NOT place or drop into water or other liquids.
• DO NOT use water above 86°F.
• Use this unit only for its intended purpose as described
in this document, the Quick–Start Guide and User
Guide.
• DO NOT use attachments not recommended by
MIRRA or HoMedics; specifically, any attachments
not provided with this unit.
• NEVER drop or insert any object into any opening.
• DO NOT place the fountain near heat sources, such
as a stove.
• Always keep the cord away from high temperatures
and fire.
• To disconnect, turn all controls to the off position,
then remove the plug from the outlet.
• DO NOT use outdoors. For indoor use only.
• Never cover the unit while it is operating.
• Perform regular maintenance on the fountain.
• Never use detergent to clean the fountain.
• Never clean the fountain by scraping with a hard
object.
•DO NOT attempt to adjust or repair the unit. Servicing
must be performed by professional, qualified
personnel.
• Stop using this unit if there is an unusual noise or smell.
• Unplug this unit when not in use for a long period of
time.
• DO NOT clean, adjust, or move the fountain, or
place hands into the water of the fountain without
first unplugging it from the electrical outlet.
• Keep this unit out of reach of children.
• Never let the pump run dry, as this will shorten the life
of the pump.
• Operate pump completely submerged for proper
cooling.
• To ensure quiet operation of pump, you must rinse
off all surfaces of your fountain, including the rocks
(if provided with your model) before using the first
time. Any dirt or residue that remains on the fountain
surface may obstruct the water flow through your
pump, thereby causing unnecessary noise.
• DO NOT carry this appliance by the power cord or
use the cord as a handle.
• Operate with tap or distilled water.
• The pump must be completely submerged in water.
If the pump is making noises, most likely it is not
completely submerged in water.
• The electric cord of this product cannot be replaced.
If it sustains damages, you must stop using the
product immediately and contact MIRRA Consumer
Relations (see Warranty section for Consumer
Relations contact information).

www.homedics.com US: 1-800-466-3342 CAN: 1-888-225-7378 IB-WFL420
IB-WFL420 | ©2018 HoMedics, LLC.
All rights reserved. | Tous droits réservés. | Todo derechos reservados.
Mirra is a trademark of HoMedics, LLC. | HoMedics is a registered trademark of HoMedics, LLC.
To register your product, visit us online.
CONTACT US
Questions or concerns? We’re here to help. Contact a
Consumer Relations representative by phone or email
to help answer any questions. Please be sure to have
the model number of your product available.
For service in the USA
email: [email protected]
phone:[phone]
8:30am–7:00pm EST Monday–Friday
For service in Canada
email: [email protected]
phone:[phone]
8:30am–5:00pm EST Monday–Friday
1-YEAR LIMITED WARRANTY
For detailed warranty instructions,
visit www.homedics.com.
To obtain warranty service on your Mirra product,
contact a Consumer Relations representative by the
telephone number or email address for your country
of residence. Please make sure to have the model
number of the product available.
For service in the USA
email: [email protected]
phone:[phone]
8:30am–7:00pm EST Monday–Friday
For service in Canada
email: [email protected]
phone:[phone]
8:30am–5:00pm EST Monday–Friday