Homeroots 286163 User manual

№DESCRIPTION QTY №DESCRIPTION QTY
A
Upper Head Panel
2PCS 11/4” ×85mm 16 PCS
B
Lower Head Panel
2PCS 21/4”× 15mm 31 PCS
C
Ladder
1PC 31/4”× 65mm 6PCS
D
Upper Bed Frame
1PC 41/4” Curved Washer 24 PCS
E
Lower Bed Frame
1PC 51/4” Flate Washer 37 PCS
F
Back Guardrail
1PC 61/4” locked Nut 8PCS
G
Front Guardrail
1PC 74# Allen Wrenches 1PC
H
Upper Main Post
2PCS 84# Allen Wrenches 1PC
J
Upper Main Post
1PC
K
Upper Main Post
1PC
L
Lower Main Post
2PCS
M
Lower Main Post
2PCS
N
Conector
4PCS
BED PARTS
HARDWARE PARTS
ASSEMBLY INSTRUCTIONS
MODEL: 37385 PAGE 1 OF 5
NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE
KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!!
"A"
"B"
"C"
"D"
"E"
"F"
"G"
"H"
"J"
"K"
"L"
"M"
"N"
MODELS: 286163, 286164

Size of Mattress
This bed is designed to use a mattress 74” x 37-1/2” – 38-1/2” on the upper bunk
and the lower bunk. The thickness of the mattress must not exceed 6” on the
upper bunk. There must be at least 5” from mattress sleeping surface to top edge
of guard rail on the upper bunk.
Replacement Parts
Replacement parts, including additional guardrails, may be obtained from any of
our retail dealers.
Additional Note
Maximum total weight not to exceed 150 lbs. on the upper bunk, and maximum 200
lbs. on the lower bunk
SAFETY WARNINGS (ASTM F1427-13)
1. Follow the information on the warnings appearing on the upper bunk end structure and
on the carton. Do not remove warning label from bed.
2. Always use the recommended size mattresses or mattress supports, or both, to help
prevent the likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 in. (127 mm) below the upper edge of
guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Periodically check and ensure that the guardrail, ladder, and other components are in
their proper position, free from damage, and that all connectors are tight.
6. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
7. Always use the ladder for entering and leaving the upper bunk.
8. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
9. Use of a night light may provide added safety precaution for a child using the upper
bunk.
10. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be
placed next to the wall, the guardrail that runs the full length of the bed should be placed
against the wall to prevent entrapment between the bed and wall.
11. The use of water or sleep flotation mattresses is prohibited.
12. STRANGULATION HAZARD–Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example, but not limited to, hooks, belts
and jump ropes.
13. Keep these instructions for future reference.
14. Prohibit more than one person on upper bunk.
15. Adult assembly required due to the presence of small parts ,sharp points,sharp
edgesas recesived.
ASSEMBLY INSTRUCTIONS
MODEL: 37385 PAGE 2 OF 5
NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE
KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!!
MODELS: 286163, 286164

NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE
KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!!
SAFETY WARNINGS ( 16 CFR 1513)
(1) Do not allow children under 6 years of age to use the upper bunk.
(2) Use guardrails on both sides of the upper bunk.
(3) Prohibit horseplay on or under beds.
(4) Prohibit more than one person on upper bunk.
(5) Use ladder for entering or leaving upper bunk.
(6) If the bunk bed will be placed next to a wall, the guardrail that runs the full
length of the bed should be placed against the wall to prevent entrapment between
the bed and the wall. (This applies only to bunk beds without two full-length
guardrails.)
ASSEMBLY INSTRUCTIONS
MODEL: 37385 PAGE 3 OF 5
STEP 1、2
STEP 3
L
E
1
4
1
4
5
6
B
M
5
2
MODELS: 286163, 286164

STEP 4
STEP 5
STEP 6
NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE
KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!!
ASSEMBLY INSTRUCTIONS
MODEL: 37385 PAGE 4 OF 5
STEP 7
STEP 8
H
J
H
K
D
1
4
5
6
2
5
5
3
5
3
F
G
1
4
5
2
A
A
5
2
5
2
5
6
MODELS: 286163, 286164

ASSEMBLY INSTRUCTIONS
MODEL: 37385 PAGE 5 OF 5
NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE
KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!!
STEP 9
STEP 10
STEP 11
4
2
N
N
N
C
5
2
4
2
MODELS: 286163, 286164