HomeSpot NS003P User manual

HomeSpot®
Bluetooth Adapter Pro
for NSwitch
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of
such marks by HomeSpot® is under license.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States
and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd.,
registered in the United States and other countries.

HomeSpot NS003P
USB-C to USB-A
Adapter
Pouch
Warranty CardUser Guide

Internal Mic
Master Volume Controls
TX Button
Mixer Level Controls
RX Button
+ Increase headphones volume
Decrease headphones volume
Single press
Single press (connected)
Press and hold 3 sec
Press and hold 10 sec
Re-connect to previous headphones
Toggle Internal Mic Mute On/Off
Enter TX pairing mode
Clear TX pairing record
Press and hold 10 sec
Single press
Single press (connected)
Press and hold 3 sec
Re-connect to previous smartphone
Play/Pause music, Accept/End call
Enter RX pairing mode
Clear RX pairing record
Only TX connected
Both TX & RX connected
For in-game voice chat
For mobile voice chat or phone call
+ To hear more game audio
To hear more smartphone audio

On
Off
Audio equalizer enabled (use Headphones
Play/Pause to toggle audio EQ On/Off)
Audio equalizer disabled
On
Slow Blinking
Fast Blinking
Off
Connected to headphones
Re-connecting to previous headphones
Searching for headphones to pair with
No headphones connected
White
Amber
Off
Headphones supports aptX
Headphones supports aptX Low Latency
Headphones supports SBC
On
Slow Blinking
Connected to smartphone
Re-connecting to previous smartphone
Fast Blinking
Off
Ready for pairing with smartphone
No smartphone connected
Off
On Internal Mic muted
Internal Mic active
EQ LED
Headphones LED
aptX LED Internal Mic Mute LED
Smartphone LED

1. Insert the HomeSpot NS003P into the NSwitch USB-C port.
2. Turn on the NSwitch and go to the Home Menu.
3. NS003P is ready for pairing with headphones once the
Headphones LED indicator is fast blinking.
4. Make sure the headphones is ready for pairing and bring it
close to the NS003P.
5. NS003P will automatically search and pair with the
headphones.
6. Once connected with headphones, the Headphones LED
indicator will be On and the aptX LED indicator will be On
if the paired headphones supports either aptX or aptX Low
Latency.
7. Press the RX button.
8. NS003P is ready for pairing with smartphone once the
Smartphone LED indicator is fast blinking.
9. Turn on Bluetooth function on the smartphone, search for
and pair with “HomeSpot NS BTA Pro”.
10. Once connected with smartphone, the Smartphone LED
indicator will be On.

1. Insert the HomeSpot NS003P into the NSwitch USB-C port.
2. Turn on the NSwitch and go to the Home Menu.
3. Press the TX Button to re-connect to the previously paired
headphones.
4. Press the RX Button to re-connect to the previously paired
smartphone.
1. Insert the HomeSpot NS003P into the NSwitch USB-C port.
2. Turn on the NSwitch and go to the Home Menu.
3. Make sure the NS003P is not connected to any headphones.
4. Press and hold the TX Button for 3 seconds until the
Headphones LED indictor starts fast blinking.
5. Follow step 4 to 6 of Initial Setup.
1. Insert the HomeSpot NS003P into the NSwitch USB-C port.
2. Turn on the NSwitch and go to the Home Menu.
3. Make sure the NS003P is not connected to any smartphone.
4. Press and hold the RX Button for 3 seconds until the
Smartphone LED indictor starts fast blinking.
5. Follow step 9 to 10 of Initial Setup.

1. Power off the Nintendo Switch. Hold down the power button
for several seconds, then select "Power Options""Turn Off".
2. Insert the HomeSpot NS003P into the NSwitch USB-C port.
3. Power on the NSwitch and go to the Home menu.
4. Make sure the NS003P is not connected to any headphones
and smartphone.
5. Press and hold the TX button for 10 seconds until the aptX LED
flashes.
6. Press and hold the RX button for 10 seconds until the Mic Mute
LED flashes.
7. Proceed to the Intial Setup procedure to set up headphones
and smartphone pairings.

1. Connect both headphones and smartphone to NS003P.
2. Start voice chat app on smartphone.
3. Maintain a close distance (within 1 m) to the NS003P Internal
Mic for optimal voice chat quality.
4. If the Internal Mic Mute LED is On, press the TX Button to turn
it off.
Game
Audio
Audio
Mix
Mic
Talk
alk
Voice
Chat

1. Connect both headphones and smartphone to NS003P.
2. Start audio or music app on smartphone.
3. Use the Mixer Level Controls to adjust mixing proportion of
NSwitch and phone audio.
Game
Audio
Audio
Mix
Music

1. Connect headphones to NS003P.
2. Enable voice chat in the game settings.
3. Maintain a close distance (within 1 m) to the NS003P Internal
Mic for optimal voice chat quality.
4. If the Internal Mic Mute LED is On, press the TX Button to turn
it off.
Mic
Talk
Game
Audio
In-game
Voice Chat
Audio
Mix
Mix