Homestead Entryway Bench User manual

Page 1 of 4
Entryway Bench
Safety and Care Advice
Important - Please read these instructions fully before starting assembly

Check you have all the components and
tools listed on the following pages.
 Remove all fittings from the plastic bags
and separate them in to their groups.
 Keep children and animals away from the
work area, small parts could choke if
swallowed.
 Make sure you have enough space to
layout the parts before starting.
 During assembly do not stand or put
weight on the product, this could cause
damage.
 Assemble the item as close to its final
position (in the same room) as possible.
 Assemble on a soft level surface to avoid
damaging the unit or your floor.

Parts of the assembly will be easier with 2
people.

Do not use this chair as a step ladder.
 Do not stand on the product, this could
cause damage.
 Do not fully tighten nuts and bolts until all
nuts and bolts are partially tightened.
 Do not over tighten nuts and bolts to avoid
causing damage to the threading.
 Do not use power tools to assemble your
furniture. Power tools may strip or
damage the parts.
Care and maintenance
 Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.
 From time to time check that there are no loose screws on this unit.
Handy Hints
 Assemble all parts and bolts loosely during assembly, only once the product is complete should
you fully tighten the bolts
 Regularly check and ensure that all bolts and fittings are tightened properly.

Page 2 of 4
PART LIST:
HARDWARE LIST:
Top
A
Qty.
1
Lower floor
B
Qty. 1
Joint Connector Screw
1
Qty. 8
Allen Key
2
Qty. 1
Leg panal
C
Qty. 2

Page 3 of 4
Assembly:
Step 1
Step 2

Page 4 of 4
Step 3
Finish Product
Weight Limits:
This maximum safe weight of user:
110 kg. Exceeding these load limits
could cause sagging, instability,
product collapse, and/or serious
injury.