Honeywell Home 9000 Series User manual

9000 Series Smart Colour
Touchscreen Thermostat
User Guide

2
Features of Your Thermostat
With your new thermostat, you can:
• Connect to the Internet to monitor and control your heating/cooling system.
• View and change your heating/cooling system settings.
• View and set temperature and schedules.
• Receive alerts via email and get automatic upgrades.
• View outdoor temperature and humidity (requires WiFi set up and registration).
Need Help?
For assistance please visit http://honeywellhome.com,
or call toll-free: 1800 049 687

Welcome
Congratulations on your purchase of a smart colour touchscreen programmable
thermostat. When registered to Total Connect Comfort Solutions, you can remotely
monitor and control the heating and cooling system in your home—you can stay
connected to your comfort system wherever you go.
Total Connect Comfort is the perfect solution if you travel frequently, own a vacation
home, or manage an investment property or if you are simply looking for peace of mind.

Table of Contents
About your new thermostat
Home Screen Quick Reference...................1
Installation
Connecting to Your WiFi Network............3
Registering Your Thermostat Online........6
Operation
Setting the Time/Date..................................10
Setting the Fan.................................................11
Selecting System Mode ...............................12
Preset EnergySaving Schedules............13
Adjusting Program Schedules..................14
Overriding SchedulesHome....................17
Viewing Equipment Status.........................18
Setting Vacation HoldHome...................19
Customising Screen Colour.......................20
Setting Preferences........................................21
Cleaning the Thermostat Screen ............22
Adjusting Security Settings........................23
Smart Response Technology ....................24
Compressor Protection ................................25
Auto Changeover.............................................26
Setting Advanced Preferences.................27
Disconnecting Your WiFi Network........30
Reconnecting Your WiFi Network .........31
Unregistering Your Thermostat................32
Changing System Setup..............................33
Appendices
Frequently Asked Questions......................39
Getting Help and Responding to Alerts.....41
Software Updates............................................43
Troubleshooting...............................................44
Limited Warranty.............................................46

1
Quick Reference: Home Use
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (heat/cool).
MENU. Touch to display options. Start here to
set a program schedule.
CURRENT SCHEDULE. Change temperature
setting and select temporary or permanent
hold.
INDOOR CONDITIONS. Shows indoor
temperature and humidity.
CURRENT DATE AND TIME.
CURRENT STATUS. Shows system mode
(heat/cool).
OUTDOOR CONDITIONS. Outdoor temperature
and humidity appear after registration.

2
Setting Up Your Thermostat
Setting up your programmable touchscreen thermostat is easy.
Connect it to your home wireless network.
Register online for remote access.

3
Connecting to Your Wi-Fi network
1. Connect the WiFi network.
1a. Touch MENU > Wi-Fi Setup.
-OR-
Touch Yes to connect the thermostat to your
WiFi network.
The screen displays the message “Searching
for wireless networks. Please wait...” after which
it displays a list of all WiFi networks it can find.
2. Select the network.
2a. Touch the name of the network you
want to use. The thermostat displays a
password page.
Yes
Your Network
Note: If your home network is not
shown on the list, touch Rescan.
MENU
Wi-Fi Setup

4
Connecting to Your Wi-Fi network
2b. Using the keyboard, touch the
characters that spell out your home
network password.
2c. Touch Done. The thermostat displays
“Connecting to your network. Please
wait...” then shows a “Connection
Successful” screen.
2d. Touch Next to display the
registration information screen.
2e. Note your Thermostat MAC and
Thermostat CRC. You need these
numbers to complete online
registration.
Done
Next

5
Connecting to Your Wi-Fi Network
To register your thermostat, follow the
instructions beginning on page 6.
Note: The Register Online screen remains
active until you complete registration and/
or touch Done.
Note: If you touch Done before you
register online, your home screen displays
an orange alert button telling you to
register. Touching that button displays
registration information and an option to
snooze the task.
Done

6
To view and set your WiFi thermostat remotely, you
must have a Total Connect Comfort account. Use the
following steps.
1. Open the Total Connect Comfort web site
Go to https://info.mytotalconnectcomfort.com/enAU
Registering Your Thermostat Online

7
Registering Your Thermostat Online
2. Login or create an account.
If you have an account, click Login
– OR –
Click Create An Account
2a. Follow the instructions on the screen.
2b. Check your email for an activation
message from My Total Connect
Comfort. This may take several
minutes.
Note: If you do not receive a response,
check your junk mailbox or use an
alternate e-mail address.
2c. Follow activation instructions
in the email.
2d. Log in.

8
Registering Your Thermostat Online
3. Register your WiFi thermostat.
After you are logged in to your
Total Connect Comfort account,
register your thermostat.
3a. Follow the instructions on
the screen. After adding your
thermostat location, you must
enter the thermostat’s unique
identifiers:
• MAC ID
•MAC CRC
Note: These IDs are listed on the
Register Online screen or on the
Thermostat ID Card included in the
thermostat package. The IDs are not
case sensitive.
Thermostat ID Card
Use the MAC ID and CRC ID to register this product at mytotalconnectcomfort.com
MODEL: TH9320WF3003
MAC ID: MAC CRC:
33-00233-05
This product is manufactured by Resideo Technologies, Inc., Golden Valley,MN, 1800 049 687
© 2019 Resideo Technologies, Inc. The Honeywell Home logo is used under license from Honeywell International Inc. All rights reserved.
33-00233—05 M.S. Rev. 06-19
Printed in Australia
ww
w
.
r
es
i
deo
.
com
MAC ID MAC CRC

9
Registering Your Thermostat Online
When the thermostat is
successfully registered, the Total
Connect Comfort registration
screen will display a SUCCESS
message.
You can now control your
thermostat from anywhere through
your laptop, tablet, or smartphone.
°
72
GET IT ON
Total Connect Comfort free
app is available for Apple®
iPhone®, iPad® and iPod
touch® devices at iTunes®
or at Google Play® for all
Android™ devices.

10
Setting the Time/Date
1. Touch the current time. The screen
displays Set Time/Set Date.
2. Touch Set Time or Set Date.
3. Touch por quntil the proper
time/date is displayed.
4. Touch Done to save or Cancel to
ignore changes.
Note: This thermostat will automatically
update for daylight saving time (if
observed in your area) and all date/time
information is stored. If the thermostat
is connected to WiFi and registered to
Total Connect Comfort, the current time
is updated from the internet. Done
30

11
Setting the Fan
1. Touch FAN to display fan settings.
2. Touch On, Automatic, Circulate, or
Follow Schedule.
3. Touch Done to save and exit.
On: Fan is always on.
Automatic: Fan runs only when the
heating or cooling system is on.
Circulate: Fan runs randomly about
35% of the time (home use only).
Follow Schedule: Fan controlled by
program (see pages 1319).
Note: Touch Auto or On to temporarily
override the programmed fan schedule.
FAN
Done

12
Setting System Mode
1. Touch SYSTEM to display system settings.
2. Touch desired option:
Heat: Thermostat controls only the
heating system.
Cool: Thermostat controls only the cooling
system.
Off: Heating/cooling systems are off.
Automatic: Thermostat selects heating
or cooling as needed depending on the
indoor temperature.
Emergency Heat (heat pumps with aux.
heat): Controls auxiliary/emergency heat.
Compressor is locked out.
3. Touch Done to save and exit.
SYSTEM
Done
Note: The Automatic and Emergency Heat system settings may not appear,
depending on how your thermostat was installed.

13
Preset Energy-Saving Schedules
This thermostat uses default Energy Saver settings that can reduce your
heating/cooling expenses. To customise settings, see next page.
Wake 6:00 am 22°C 26°C 22°C 26°C
Leave 8:00 am 17°C 30°C 17°C 30°C
Return 6:00 pm 22°C 26°C 22°C 26°C
Sleep 10:00 pm 17°C 28°C 17°C 28°C
Cool
(MonFri)Start time
Heat
(MonFri)Period
Heat
(SatSun)
Cool
(SatSun)
Home Use

14
Adjusting Program Schedules
1. Touch MENU.
2. Select Create/Edit Schedule.
yTouch View/Edit to view the full schedule
and make a quick adjustment.
yTouch Guide Me to create a schedule by
answering simple questions.
yTouch I’ll do it myself to manually create
a program schedule. See page 15.
Note: To reduce costs, use the pre-set Energy
Saver settings described on page 13.
MENU
Create /Edit Schedule

15
Adjusting Program Schedules
If you selected I’ll do it myself on the
Create/Edit Schedule screen (page 14),
follow these steps:
1. Select the days to schedule, touch Next.
2. Touch Wake to set your Wake time for
selected days. Next

16
Adjusting Program Schedules
3. Touch por qto set Heat and Cool
temperatures for the Wake period, then
touch Done.
4. Touch other time periods (Leave, Return,
Sleep) to set time and temperatures
for each.
5. Touch Done to save and exit.
Note: Touch Delete Period to eliminate
any unwanted time period.
Note: Touch Fan Settings to customise
fan settings for any time period.