Honeywell Home TH7000 Series User manual

Operating Manual
TH7000 Series
Touchscreen Programmable Thermostat
TH7220U1035
69-2667ES-03

69-2667ES—03
Read and save these instructions.
Need Help?
For assistance with this product please visit honeywellhome.com/support
or call Customer Care toll-free at 18004681502
BE CAREFUL! Never use sharp instruments, such as a pencil
or pen, to press touchscreen keys. To prevent damage to the
thermostat, always press keys with your fingertip.
This thermostat contains a Lithium battery which may contain Perchlorate material.
Perchlorate Material—special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate
This manual covers the following models
TH7220U: For up to 2 Heat/2 Cool systems
(Pull thermostat from wallplate and turn over to find model number)
M29343

169-2667ES—03
About your new thermostat
Thermostat features........................................2
Programming at a glance.............................3
Quick reference to controls.........................4
Quick reference to status display.............5
Programming & Operation
Clock setting .......................................................6
Fan setting ...........................................................7
System setting ...................................................8
Using program schedules............................9
Program schedule overrides....................12
Special features..............................................14
Furnace filter reminder...............................15
Special features..............................................16
Screen lock........................................................17
Appendices
Battery replacement ....................................18
Advanced functions......................................19
In case of difficulty........................................25
Optional remote sensors ...........................27
Limited warranty ............................................28
This thermostat is ready to go!
Your new thermostat is pre-
programmed and ready to go.
See page 3 to check settings.
CAUTION: EQUIPMENT DAMAGE
HAZARD. To prevent possible
compressor damage, do not operate
cooling system when outdoor
temperature is below 50 ˚F (10 ˚C).
TH7000 Series
Table of contents

Operating Manual
2
69-2667ES—03
About your new thermostat
Congratulations! You’ve just purchased the world’s most advanced, easy-to-use ther-
mostat. It has been designed to give you many years of reliable service and touch-
screen climate control.
Features
• 7-day program schedules maximize comfort and economy.
• Armchair programming: Just pull thermostat from the wall to set schedules.
• Energy-saving settings for maximum cost savings.
• One-touch temp control overrides program schedule at any time.
• Precise comfort control keeps temperature within 1°F of the level you set.
• Change/check reminders let you know when to service or replace filters, batteries
and other critical components.
• Large touchscreen display with backlight is easy to read—even in the dark.
• Select models accommodate optional outdoor or indoor remote sensors.

TH7000 Series
3
About your new thermostat
69-2667ES—03
Your new thermostat is pre-programmed and ready to go. Just set the time and day.
Then check the settings below and change if needed:
1. Set clock ...........................................................................................................................................See page 6
2. Select fan setting: Preset to Auto.......................................................................................See page 7
3. Select system setting: Preset to Heat..............................................................................See page 8
4. Program schedules: Preset to energy-saving levels
while you’re at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm)................................................................................................See pages 9-11
ONETOUCH TEMP CONTROL: You can override the program schedule at any time,
and manually adjust the temperature (see pages 1113).
This thermostat is ready to go!

Operating Manual
4
69-2667ES—03
Mon
System & FanSchedule Clock & More
M31502
System
Cool
Fan Auto
Set To
Cool On
AM
75
75
6:01
System & Fan
Press to select fan
operation (see page
7) or system type (see
page 8)
Arrow keys
Press to adjust temperature
(see pages 1114), or to make
selections from screen menus.
Schedule
Press to set program
schedule (see page 11).
Clock & More
Press to set clock (see page 6)
or furnace filter reminder.
Quick reference to controls
If the screen backlight is off, the
first button press will only activate
the backlight, and the button must
be pressed again.

TH7000 Series
569-2667ES—03
Mon
System & FanSchedule Clock & More
M31503
System
Cool
Fan Auto
Recovery
Set To
Cool On
AM
75
75
6:01
Current inside temperature
Current day of week
Temperature setting
Fan setting
(see page 7)
Other display messages:
• Cool On: Cooling system is activated
• Heat On: Heating system is activated
• Aux Heat On: Auxiliary heating
system is activated
Quick reference to status display
System setting
(see page 8)
Adaptive Intelligent
Recovery in effect
(see page 16)
Current time

Operating Manual
6
69-2667ES—03
MCR31505
Go BackDoneNext
MON
AM
6:01
M31504
System & FanScheduleClock & More
To set the current time, press CLOCK & MORE,
then press s or t to adjust the time. Press
and hold s or t to advance the time more
quickly.
Press DONE to save & exit (or press GO BACK to
exit without changing the time).
Note: The real-time clock should never require
adjustment since it automatically updates for
daylight saving time, and stores all date/time
information.
Note: To change the current week day display,
see pages 1920.
Press CLOCK & MORE
Adjust time, then press DONE
Clock setting

TH7000 Series
769-2667ES—03
M27529
SystemFanDone
System
Heat
Fan Auto
M31504
System & FanScheduleClock & More
Press SYSTEM & FAN to select fan operation:
• On: Fan is always on.
• Auto: Fan runs only when the heating or
cooling system is on.
Fan setting
Press SYSTEM & FAN
Press FAN to select mode, then press DONE

Operating Manual
8
69-2667ES—03
Follow steps at left to select system:
• Heat: Thermostat controls only the
heating system.
• Cool: Thermostat controls only the
cooling system.
• Auto: Thermostat automatically selects
heating or cooling depending on the
indoor temperature.
• Off: All systems are off.
• Em Heat (only for heat pumps with
auxiliary heat): Thermostat controls
Emergency and Auxiliary Heat.
Compressor is locked out.
System setting
M27529
SystemFanDone
System
Heat
Fan Auto
M31504
System & FanScheduleClock & More
Press SYSTEM & FAN
Press SYSTEM to select mode,
then press DONE
Note: The Auto and Em Heat system
settings may not appear, depending on
how your thermostat was installed.

TH7000 Series
969-2667ES—03
Save money by setting program schedules
It’s easy to program your system for maximum energy savings. You can program four
time periods each day, with different settings for weekdays and weekends.
Set to the time you awaken and the temperature you want
during the morning, until you leave for the day.
Set to the time you leave home and the temperature you
want while you are away (usually an energy-saving level).
Set to the time you return home and the temperature you
want during the evening, until bedtime.
Set to the time you go to bed and the temperature you want
overnight (usually an energy-saving level).
WAKE
6:00 am
70 °
LEAVE
8:00 am
62 °
RETURN
6:00 pm
70 °
SLEEP
10:00 pm
62 °

Operating Manual
10
69-2667ES—03
This thermostat is pre-set with energy-saving program settings. (See next page to
adjust times and temperatures of each time period.)
Wake
(6:00 am)
Leave
(8:00 am)
Return
(6:00 pm)
Sleep
(10:00 pm)
Cool (MonFri)Heat (MonFri) Heat (SatSun) Cool (SatSun)
70 °78 °70 °78 °
62 °85 °62 °85 °
70 °78 °70 °78 °
62 °82 °62 °82 °
Energy-saving settings for maximum cost savings

TH7000 Series
11 69-2667ES—03
M31504
System & FanScheduleClock & More
M27530
Go BackEdit View
Go BackNext Step Done
Period
Wake
MON
TUE
WED
THU
FRI
M27531
Set To
Heat
AM
62
6:00
To adjust program schedules
1. Press SCHEDULE, then EDIT to see weekdays.
2. Press SELECT DAY. You can select multiple
days to program with the same settings.
3. Press NEXT STEP twice, then press sor tto
set Wake time for selected day(s).
4. Press NEXT STEP, then sor tto set Heat
temperature for this time period.
5. Press NEXT STEP, then sor tto set Cool
temperature for this time period.
6. Repeat steps 35 to program other time
periods (LEAVE, RETURN, SLEEP), then press
DONE.
7. Repeat steps 16 to program Saturday/
Sunday. (Press sor tuntil the desired day
is flashing, then press SELECT DAY.)
8. Press DONE to save & exit.
Press EDIT
Select
day(s) Select time Select temp
Press SCHEDULE

Operating Manual
12
69-2667ES—03
Mon
System & FanUse
Schedule Clock & More
MCR31506
System
Heat Fan Auto
Te mporary
Set To
Heat On
AM
62
68
6:08
Program schedule override (temporary)
Press s or t to immediately adjust the tem-
perature. This will temporarily override the tem-
perature setting for the current time period.
The new temperature will be maintained until
the next time period.
When the timer expires, the program schedule
will resume and set the temperature to the level
you’ve programmed for the current time period.
To cancel the temporary setting at any time,
press USE SCHEDULE.
Adjust temperature
Press USE SCHEDULE to resume program
schedule

TH7000 Series
13 69-2667ES—03
Mon
Hold Cancel
MCR31507
Te mporary
Set To
System
Heat Fan Auto
AM
62
68
6:08
Permanent Hold
Program schedule override (permanent)
Adjust temperature Press s or t to adjust temperature, then press
HOLD. This will turn off the program schedule.
Whatever temperature you set will be main-
tained 24 hours a day, until you manually
change it, or press USE SCHEDULE to cancel
“Hold” and resume the program schedule.
Press HOLD to turn off program
schedule and maintain set
temperature

Operating Manual
14
69-2667ES—03
When the system is set to Auto, the thermostat automatically selects heating or cool-
ing depending on the indoor temperature and the temperature settings. The thermo-
stat maintains a 3 degree difference between the heat and cool settings. See example
below.
The triangle indicates the cool temperature
is increasing to maintain 3 degrees between
heat and cool settings.
Auto Changeover
Tu e
System
Hold Cancel
M27534
SystemAuto
Heat
FanAuto
Te mporary
Set To
Heat
Cool
PM
69
74
1:09
º
CAUTION: To avoid possible compressor damage, do not use Auto
Changeover if the outside temperature drops below 50 °F (10 °C).

TH7000 Series
15 69-2667ES—03
Furnace filter reminder
Reset ScheduleClock & More
M31507
SystemFan Auto
Set To
Heat On
Change Filter
AM
70
70
6:01
Heat
Reset Next Done
M27536
60
Days
If activated during installation, the furnace
filter reminder alerts you when it is time to
replace your filter.
Press RESET after changing the filter, to restart
the timer.
To reset the reminder interval before it expires:
1. Press MORE, then NEXT.
2. Press RESET.
3. Press DONE to save and exit.
Press MORE to reset reminder interval
Press RESET after changing filter

Operating Manual
16
69-2667ES—03
Special features
Auto Changeover: When set to Auto, the thermostat automatically selects heating or
cooling depending on the indoor temperature. See page 14 for more information.
Adaptive Intelligent Recovery: This feature allows the thermostat to “learn” how long
the furnace and air conditioner take to reach programmed temperature settings, so
the temperature is reached at the time you set. For example: Set the Wake time to 6
am, and the temperature to 70°. The heat will come on before 6 am, so the tempera-
ture is 70° by the time you wake at 6. The message “Recovery” is displayed when the
system is activated before a scheduled time period.
Compressor Protection: This feature forces the compressor to wait a few minutes
before restarting, to prevent equipment damage. During the wait time, the message
“Wait” is displayed on screen.

TH7000 Series
17 69-2667ES—03
Mon
Locked
System & FanSchedule Clock & More
MCR31508
System
Cool Fan Auto
Set To
Heat On
Recovery
AM
75
75
6:01
Screen lock
To prevent tampering, the screen can be par-
tially or fully locked.
When partially locked, the screen displays
LOCKED for several seconds if a locked key
is pressed. To unlock the screen, press any
unlocked key while LOCKED appears on the
screen.
When the screen is fully locked, no keys func-
tion. To lock or unlock the screen, see advanced
function 0670 on page 24.
See advanced function
0670 (page 24) for
screen lock options

Operating Manual
18
About your new thermostat
69-2667ES—03
Battery replacement
M28419
M28420
Grasp thermostat and
pull to remove from wall-
plate
Insert 2 fresh AA alkaline batteries
Batteries are optional (to provide backup power) if
your thermostat was wired to run on AC power when
installed.
Install fresh batteries immediately when the LO BATT
warning begins flashing. The warning flashes about
30 days before batteries are depleted.
Even if the warning does not appear, you should
replace batteries once a year, or before leaving home
for more than a month.
For assistance with this product, please visit
honeywellhome.com/support
or call Customer Care toll-free at
18004681502.