Honeywell CT50 User manual

Dolphin™ CT50 Non-Incendive
with Windows®10 IoT Mobile Enterprise
Quick Start Guide
CT50NI-W10-EN-QS Rev A
1/17
*CT50NI-W10-EN-QS*

Introduction
This document is for the Dolphin CT50 NI. This is the non-incendive version
of the Dolphin CT50. The Dolphin CT50 NI can be identified by the yellow
scan buttons and a device label verifying non-incendive certification.
Warning: Explosion Hazard - Substitution of components may impair
suitability for Division 2 Class I, II, III locations.
Avertissement: Risque d’explosion - Le remplacement de composants
risque de compromettre l’adaptation du produit aux sites de division 2
catégorie I, II, III.
Out of the Box
Make sure that your shipping box contains these items:
• Dolphin CT50 NI mobile computer (Models CT50L0N, CT50LFN)
• Rechargeable 3.6 VDC Li-ion battery
• Quick start guide and other compliance documents
If you ordered accessories for your mobile computer, verify that they are also
included with the order. Be sure to keep the original packaging in case you
need to return the mobile computer for service.
Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD™ or microSDHC™ memory cards with Dolphin mobile computers
for maximum performance and durability. Contact a Honeywell sales
representative for additional information on qualified memory card options.

Accessories for the Dolphin CT50 NI
These accessories are available for the CT50:
• HomeBase (Model CT50-HB)
• Ethernet HomeBase (Model CT50-EB)
• ChargeBase (Model CT50-CB)
• NetBase (Model CT50-NB)
• Quad Battery Charger (Model CT50-QBC)
• Vehicle Power Adapter (Model CT50-MC)
• Vehicle Dock (Model CT50-MB)
• USB Adapter (Model CT50-USB)
• Scan Handle
• Holster

Front Features
Navigation panel
Touch panel
Speaker Good Read LED
Volume buttons
Battery status /
Notification LED
Microphone
Power
button
Scan buttons

Back Features
Camera
button
Camera lens
Battery door
latch
microSIM and microSD door
Battery

Install a microSIM Card

Install a microSD Card
Note: Format the microSD card before initial use.

Install the Battery
The Dolphin CT50 NI mobile computers ship with a Li-ion 3.6 VDC, 14.6
watt-hour battery manufactured for Honeywell International Inc.

32
Charge the Computer
Warning: Explosion Hazard - Batteries must only be changed or
charged in an area known to be non-hazardous. Use ONLY Honeywell
CT50 NI battery part number 318-055-003.
Risque d’explosion - Les batteries doivent uniquement être
remplacées ou rechargées dans un endroit non dangereux. Utilisez
UNIQUEMENT Honeywell CT50NI batterie P/N 318-055-003.
The Dolphin CT50 NI mobile computer ships with a partially charged battery.
Charge the battery with a CT50 charging device for a minimum of 4 hours.
Using the computer while charging the battery increases the time required to
reach a full charge.
Caution: We recommend the use of Honeywell accessories and power
adapters. Use of any non-Honeywell accessories or power adapters
may cause damage not covered by the warranty.
Mise en garde : Il est recommandé d'utiliser les périphériques, les
cordons d'alimentation et les adaptateurs secteur conçus par
Honeywell. L'utilisation de tout périphérique, cordon d'alimentation ou
adaptateur secteur d'une autre marque est susceptible de provoquer
des dommages non couverts par la garantie.
The Dolphin CT50 NI mobile computers are designed for use with the
following charging accessories: HomeBase, Ethernet HomeBase,
ChargeBase, NetBase, Quad Battery Charger, Vehicle Power Adapter,
Vehicle Dock, and USB Adapter.

Caution: Make sure that all components are dry prior to using the
computers and batteries with accessories. Using wet components may
cause damage not covered by the warranty.
Mise en garde : Assurez-vous que tous les composants sont secs avant
de connecter les terminaux/batteries à des périphériques. L'insertion de
composants humides risque de provoquer des dommages non couverts
par la garantie.