Honeywell Dolphin CN80 User manual

Dolphin™ CN80
powered by Android™
Quick Start Guide
CN80-A7-EN-QS Rev A
3/18

2
Out of the Box
Make sure that your shipping box contains these items:
• Dolphin CN80 mobile computer
(Model CN80L0N or CN80L1N)
• Rechargeable 3.85 VDC Li-ion battery
• Stylus and tether
•Handstrap
• Product documentation
If you ordered accessories for your mobile computer, verify that
they are also included with the order. Be sure to keep the original
packaging in case you need to return the mobile computer for
service.
Note: CN80L0N models do not include a WWAN radio.
Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC)
industrial grade microSD™ or microSDHC™ memory cards with
Dolphin mobile computers for maximum performance and
durability. Contact a Honeywell sales representative for
additional information on qualified memory card options.

3
Mobile Computer Features
CN80 Model with 6603ER Imager
Scan
Button
Microphone
Power
Button
Battery Status /Notification LED
Microphone
Receiver Speaker
Touch Panel
Scan Button
I/O Connector
Aux
Button
Keyboard
(model dependent)
Speakers
Scan Status LED

4
Camera Lens and
Flash
Battery
Scan Button
Battery Latch
Imager (LED / Laser Aperture)
microSIM/
microSD Card
Door
Laser Safety
Label Location
Volume Buttons
Stylus
Hand Strap
Microphone
IMEI Label
Location on
Model
CN80L1N
Pressure Sensor

5
CN80 Model with EX20 Near/Far Imager
Scan
Button
Microphone
Power
Button
Battery Status /Notification LED
Microphone
Receiver Speaker
Touch Panel
Scan Button
I/O Connector
Aux
Button
Keyboard
(model dependent)
Speakers
Scan Status LED

6
Camera Lens and
Flash
Battery
Scan Button
Battery Latch
Imager (LED / Laser Aperture)
Laser Safety
Label Location
Volume Buttons
microSIM/
microSD Card
Door
Stylus
Hand Strap
Microphone
Pressure Sensor

7
Install a microSIM Card / Install a microSD Card
Always power off the computer before attempting to
install or remove a card.
1
2

8
SIM 1
Phone feature is available only on CN80L1N models.
When using a UICC card for NFC Secure Element NFC link
encryption, install the card in SIM slot 1.
SIM 2
SIM 2 feature is available only on CN80L1N models.
3 4 5
3 4 5

9
microSD
Format the microSD card before initial use.
3 4 5
6
7

10
Install the Battery
The CN80 mobile computer ships with a Li-ion 3.85 VDC, 22.3
watt-hour battery manufactured for Honeywell International
Inc.
Use only Honeywell Li-ion battery pack model
CW-BAT (SKU CX80-BAT-EXT-WRLS1).
Ensure all components are dry prior to placing the
battery in the computer. Mating wet components may
cause damage not covered by the warranty.
1
2
3

11
Install the Hand Strap
12
43
5Snap
Snap

12
Charge the Mobile Computer
The CN80 mobile computer ships with a partially charged
battery. Charge the battery with a CX80 Series charging device
for a minimum of 4 hours. Using the computer while charging
the battery increases the time required to reach a full charge.
CN80 mobile computers are designed for use with the following
CX80 Series charging accessories: HomeBase, Ethernet
HomeBase, ChargeBase, NetBase, Quad Battery Charger,
Vehicle Power Adapter, Vehicle Dock, and Snap-on Adapters.
Turn Power On/Off
To turn the computer on:
•PressandholdthePower button for approximately 3 seconds,
and then release.
To turn the computer off:
1. Press and hold the Power button until the options menu
appears.
2. Touch Power Off.
3. When prompted to shut down the computer, touch OK.
We recommend the use of Honeywell accessories and
power adapters. Use of any non-Honeywell
accessories or power adapters may cause damage not
covered by the warranty.
Ensure all components are dry prior to mating the
computers and batteries with peripheral devices.
Mating wet components may cause damage not
covered by the warranty.

13
Battery Swap Mode for Battery Replacement
You should always place the computer in Battery Swap mode
before removing the battery. Battery Swap mode places the
computer in a low power state so that the battery can be
removed for a short time.
To activate Battery Swap mode:
1. Press and hold the Power button until the options menu
appears.
2. Touch Battery Swap and follow the on-screen instructions.
3. Once you replace the battery, press the Power button.
Sleep Mode
Sleep mode automatically turns the touch panel display off and
locks the computer to save battery power when the computer is
inactive for a programmed period of time.
1. Press and release the Power button to wake the computer.
2. Drag the toward the top of the display to unlock the
computer.
Adjust the Display Sleep Time
To adjust the amount of time before the display sleeps after
inactivity:
1. Touch > Settings > Display > Sleep.
2. Select the amount of time before the display goes to sleep.
3. Touch to return to the Home screen.

14
About the Home Screen
To learn how to customize the Home screen, see the user guide.
Notification /
Status Bar
Search Bar
Touch to
initiate a voice
search or
command.
Home Screen
Panel
Touch to
access all apps.
Favorites Tray
Navigation Buttons

15
Navigation and Function Buttons
For button locations, see Mobile Computer Features.
To learn more about how to re-map a button, see the user guide.
Button Description
Back Return to the previous screen.
Home Return to the Home screen.
Recent Apps View and switch between
recently used apps.
Volume Raise or lower the volume of the
speaker.
Scan Press right or left scan button to
trigger the scanner.
Aux Use the Key Remap feature in
the Settings app to select a
button function. For example,
the button could be set to
initiate the push-to-talk (PTT)
feature.

16
Scan a Bar Code with the Scan Demo
Note: For optimum performance, avoid reflections by scanning the bar
code at a slight angle.
1. Touch > Demos > Scan Demo.
2. Point the computer at the bar code.
3. Touch Scan on the touch screen or press and hold any Scan
button. Center the aiming beam over the bar code.
The decode results appear on the screen.
Note: In the Scan Demo app, not all bar code symbologies are enabled
by default. If a bar code does not scan, the correct symbology may
not be enabled. To learn how to modify the default app settings,
see the user guide.

17
Sync Data
To move files between your CN80 and a computer:
1. Connect the CN80 to your computer using a USB charge/
communication accessory.
2. By default, the CN80 is in USB charging only mode. To
enable file transfers, swipe down from the top of the screen
to access the Notifications panel.
3. Touch the USB notification, and then select either Transfer
files or Transfer photos (PTP).
4. Depending on the Windows® operating system on your
computer, either open File Explorer or Windows Explorer.
5. Under “Computer” or “This PC”, click on the CN80. You can
now copy, delete and/or move files or folders between the
computer and CN80 or a microSD card installed in the
CN80 as you would with any other storage drive (e.g., cut
and paste or drag and drop).

18
Restart the Mobile Computer
You may need to restart the mobile computer to correct
conditions where an application stops responding to the system
or the computer seems to be locked up.
1. Press and hold the Power button until the options menu
appears.
2. Select Reboot and then OK.
To restart the computer if the touch panel display is
unresponsive:
•PressandholdthePower button for approximately 8 seconds
until the computer restarts.
Note: To learn about advanced reset options, see the user guide.

19
Support
To search our knowledge base for a solution or log into the
Technical Support Portal and report a problem, go to
www.hsmcontactsupport.com.
User Documentation
For the user guide and other documentation, go to
www.honeywellaidc.com.
Limited Warranty
For warranty information, go to www.honeywellaidc.com and
click Get Resources > Product Warranty.
Patents
For patent information, see www.hsmpats.com.
Trademarks
Android is a trademark of Google LLC.
Windows is either a registered trademark or registered
trademark of Microsoft Corporation in the United States and/or
other countries.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make
changes in specifications and other information contained in
this document without prior notice, and the reader should in all
cases consult HII to determine whether any such changes have
been made. The information in this publication does not
represent a commitment on the part of HII.

20
HII shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential
damages resulting from the furnishing, performance, or use of
this material. HII disclaims all responsibility for the selection
and use of software and/or hardware to achieve intended
results.
This document contains proprietary information that is
protected by copyright. All rights are reserved. No part of this
document may be photocopied, reproduced, or translated into
another language without the prior written consent of HII.
Copyright © 2018 Honeywell International Inc. All rights
reserved.