Honeywell In-s series User manual

Honeywell

730xxxxxx ©

English

Instruction Manual

Pulse generator

Type IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1

Betriebsanleitung

Impulsgeber

Typ IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1

Mode d’emploi

Émetteur d’impulsions

Type IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1

Manual de instrucciones

Emisor de impulsos

Modelos IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1

Istruzioni d’uso

Trasmettitore d’impulsi

Tipo IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1

Gebruiksaanwijzing

Impulsgever

Type IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1

Honeywell

730xxxxxx ©

English

Français

Español

Italiano Nederlands Deuts h

Instruction Manual

Pulse generator

Type IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1

Betriebsanleitung

Impulsgeber

Typ IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1

Mode d’emploi

Émetteur d’impulsions

Type IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1

Manual de instrucciones

Emisor de impulsos

Modelos IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1

Istruzioni d’uso

Trasmettitore d’impulsi

Tipo IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1

Gebruiksaanwijzing

Impulsgever

Type IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1

Honeywell

73024353

English

I -Sxx

S1xRx

S2xRx

QA E1

RVG-ST E1

Instruction manual

Pulse generator

Type IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1

Honeywell

73024353

English

Contents

1. Safety instructions ................................................................................................ 9

1.1 Intended use ................................................................................................... 10

1.2 Approvals and certifications ........................................................................... 10

1.3 Copyright and data protection ....................................................................... 11

1.4 Exemption from lia ility ................................................................................. 11

1.5 Product lia ility and guarantee ...................................................................... 12

1.6 Personnel ........................................................................................................ 12

1.7 Intended use and field of application ............................................................. 12

1.8 Legal declarations ........................................................................................... 12

1.9 Recycling and environmental protection ....................................................... 12

2. Structure and function ........................................................................................ 13

2.1 Device description .......................................................................................... 13

2.2 Connection configurations ............................................................................. 13

3. Installation and commissioning ........................................................................... 15

4. Storage................................................................................................................ 16

5. Cleaning .............................................................................................................. 16

6. Repair ................................................................................................................. 16

7. echnical data ..................................................................................................... 16

8. Ambient conditions ............................................................................................. 17

9. Approvals ............................................................................................................ 17

10. Annex A – Standards and Norms ....................................................................... 18

Honeywell

Information on the documentation

The latest version of the operating instru tions is available to download from the

Honeywell website.

Please read the information in this do ument arefully in order to avoid injury to

the user or damage to the devi e. Moreover, urrently valid national standards,

safety regulations and a ident prevention regulations must be adhered to.

Should you have any problems understanding the ontents of this do ument,

please onta t your lo al Honeywell bran h for support. Honeywell annot

a ept any responsibility for damage to property or personal injuries whi h are a

result of the information in this do ument not having been understood properly.

This do ument helps you to set up the operating onditions in su h a way that

the safe and effi ient use of the devi e is assured. In addition, this do ument also

spe ifies points and safety measures whi h must be parti ularly observed and

whi h are indi ated using the following symbols:



WARNING or CAUTION

This symbol warns of dangerous situations. Failure to follow the

instructions could result in danger to people and the

environment or the meter could suffer damage.



INFORMATION or NOTE

Accurate measurement cannot be ensured if information or

notes with this symbol are ignored.

Honeywell

73024353

English

1. Safety instructions



WARNING!

Danger of electrostatic discharge – only use a damp cloth to clean.



WARNING!

If there is danger that the device can be damaged from falling

(pointed, sharp edged or heavy) objects, the operator must protect

the device.



WARNING!

Exposure to danger which can result from a chemical reaction

between parts of the meter and chemical substances in the vicinity

must be discussed with the manufacturer and the cause must be

eliminated.



WARNING!

The gas meter on/in which the pulse generator is installed must be

integrated into the equipotential bond, e.g. by connecting it to the

grounded pipeline.



INFORMATION!

Compliance with the specified operating and ambient conditions

as indicated on the type label and the gas meter type label is

absolutely essential for the safe operation of the pulse generator.

Honeywell

1.1 Intended use



INFORMATION!

The manufacturer shall not be liable for damage caused by

improper or inappropriate use.

1.2 Approvals and certifications

CE marking / EU declaration of conformity

The manufa turer ertifies onformity with the EU

de laration of onformity and by atta hing the CE marking.

The pulse generator meets the statutory requirements of

the relevant EU guidelines.

Comprehensive information on the appli able EU

guidelines and standards, as well as re ognized

ertifi ations, is ontained in the EU de laration of

onformity.

The EU de laration of onformity is in luded in the delivery

and is also available to download at www.do uthek. om.

See Chapter 9 for more approvals and Directives.

Approvals and Annex A – Standards and orms

ATEX/IECEx



DANGER!

The pulse generator is suitable for use in Zone 1 hazardous

areas and is approved with the following certification:



2G Ex ia IIC T4 Gb

2G Ex ib IIC T4 Gb

IECEx TUR 16.0032X (IECEx)

TÜV 16 ATEX 7729 X (ATEX)

TÜV Rheinland Industrieservi e GmbH

Am Grauen Stein | 51105 Köln | Germany

TÜV Rheinland Industrieservi e GmbH

Am Grauen Stein | 51105 Köln | Germany

Honeywell

73024353

English

1.3 Copyright and data protection

This do ument has been reated with the greatest possible are. No liability

is assumed for the a ura y, ompleteness or urren y of the ontents.

The ontents and works produ ed in this do ument are subje t to opyright.

Contributions by third parties are identified as su h. The reprodu tion,

pro essing, distribution and any form of use beyond that whi h is permitted

by opyright require the written authorization of the respe tive author or the

manufa turer. The manufa turer strives to always respe t the opyright of

others or to use his own or li en e-free works.

We would like to point out that data transfer via the Internet (e.g. through e-

mail ommuni ation) an be subje t to brea hes in se urity. It is not

possible to provide omplete prote tion against a ess by third parties.

1.4 Exemption from liability

The manufa turer shall not be liable for damage of any type aused by the

use of this produ t, in luding but not restri ted to, dire t, indire t or

in idental damage and its onsequen es.

This exemption from liability does not apply if the manufa turer has a ted

intentionally or with gross negligen e. In the event that any appli able law

does not allow su h restri tions on implied warranties for defe ts, or the

ex lusion or limitation of ertain payments for damages, and should su h

law apply to you, the above-mentioned exemption from liability, ex lusions

or limitations may not apply to you in part or in whole.

For every produ t pur hased, the warranty is valid in a ordan e with the

orresponding produ t do umentation as well as the onditions of sale and

delivery of the manufa turer.

The manufa turer reserves the right to amend without prior noti e the

ontents of the do uments, in luding this exemption from liability, in any

form and at any point in time, and for any reason, and shall in no way be liable

for any possible onsequen es of su h amendments.

Honeywell

1.5 Product liability and guarantee

The responsibility as to whether the devi e is suitable for the intended use is

that of the operator. The manufa turer annot a ept any liability for the

onsequen es of misuse by the operator. Improper installation or operation

of the devi es (systems) render the warranty void. Furthermore, the relevant

“General Terms and Conditions” whi h form the basis of the pur hase

ontra t also apply.

1.6 Personnel

This manual is aimed at staff who have adequate spe ialist and te hni al

knowledge (in Germany, for instan e, in a ordan e with DVGW Codes of

Pra ti e 492 and 495 or omparable te hni al regulations) on the basis of

their training and experien e in the se tor of energy and gas distribution.

1.7 Intended use and field of application

This produ t is intended to be used for the installation on/in gas meters

from Elster/Honeywell

This produ t is not intended to be used for the installation on/in gas meters

from other manufa turers.

1.8 Legal declarations

The metrologi al onformity assessment is based on the regulations of the

ountry on erned, where the devi e will be used.

1.9 Recycling and environmental protection

Honeywell has designed the transport pa kaging of the devi e to be

environmentally friendly. Pa kaging materials are always sele ted

onsistently with a view to re y ling. The ardboard items used onstitute

se ondary raw materials for the paperboard and paper industry. The

Instapak® foam pa kaging is re y lable and an be reused.

Plasti sheeting and strips/bands are also made of re y lable plasti . At

Honeywell, subsequent re y ling and disposal are already elements of the

produ t development pro ess. When sele ting the materials, we allow for

reusability of the materials, suitability of materials and subassemblies for

dismantling and separation, and the risks of environmental pollution and

health risks when re y ling and dumping on landfill sites.

Honeywell

73024353

English

2. Structure and function

The produ ts IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1 are low-frequen y

pulse generators for turbine and rotary gas meters from Elster/Honeywell.

The versions IN-Sxx an be atta hed to the index from the outside. The

versions S1xRx / S2xRx / QA E1 / RVG-ST E1 are integrated in the index.

2.1 Device description

The pulse generators onsist of one series onne tion per hannel

omprising a reed swit h and a resistor. The reed swit h is driven by a

magnet whi h is lo ated on the inside of the gas meter index. The rotation of

the magnet usually orresponds to the rotation of the last digit roller of the

me hani al index.

When the magnet triggers the reed swit h, the atta hed ele tri al ir uit is

losed. A losure orresponds to one pulse.

2.2 Connection configurations

Type Version Terminals

IN-S10

IN-S10K

IN-S10V

6- ore able

E1 = brown (+) / white (-)

E2 = green (+) / yellow (-)

PCM = grey (+) / pink (-)

IN-S10A 4- ore able E1 = brown (+) / white (-)

PCM = green (+) / yellow (-)

IN-S11

S1xR3

S2xR3

RVG-ST 2xE1

6-pin plug

E1 = 1(+) / 2(-)

E2 = 5(+) / 6(-)

PCM = 3(+) / 4(-)

IN-S11F 6-pin plug

BF = 4(+) / 6(-)

BF = 3(+) / 5(-)

PCM = 1(+) / 2(-)

Honeywell

S1xR

S2xR 6-pin plug

E1 = 1(+) / 2(-)

IN-S12

Two 6-pin plugs

Plug 1

E1 = 1(+) / 2(-)

Plug 2

E2 = 1(+) / 2(-)

PCM = 3(+) / 4(-)

IN-S12F

Two 6-pin plugs

Plug 1

BF = 4(+) / 6(-)

PCM = 1(+) / 2(-)

Plug 2

BF = 3(+) / 5(-)

IN-S15 6-pin plug

E1 = 1(+) / 4(-)

E2 = 2(+) / 5(-)

PCM = 3(+) / 6 (-)

QA E1 3-pin plug

E1 = 1(+) / 4(-)

Honeywell

73024353

English

IN-S22

Two 3-pin plugs

Plug 1

E1 = pin A(+) + B(-)

E2 = pin C(+) + B(-)

Plug 2

E1 = pin A(+) + B(-)

E2 = pin C(+) + B(-)

Table 1 | Terminal assignment

3. Installation and commissioning

The pulse generator versions IN-Sxx are inserted sideways into the

mounting of the index until they li k into pla e (see Fig. 1).

The pulse generators S1xRx / S2xRx / QA E1 / RVG-ST E1 are supplied

ready for operation together with the gas meters.

The ables are to be onne ted as per Table 1, Terminal assignment.

For onne ting the devi es, use a s reened able pursuant to

IEC EN 60079-14.



WARNING!

If the pulse generators are used in hazardous areas, they have to be

connected to intrinsically safe circuits.

Safety barriers must be equipped for ignition protection rating

Ex ib IIC or Ex ia IIC.

Fig. 1 | Installation of IN-Sxx

Honeywell

4. Storage

Store the devi e in a dry and dust-free lo ation.

Avoid onstant dire t sunlight.

Store the devi e in its original pa kaging.

Storage temperature: -40 to +70°C / -40 to +158°F.

5. Cleaning



WARNING!

Danger of electrostatic discharge – only use a damp cloth to clean.



DANGER!

There is a risk of explosion if the plastic cover of the index is

cleaned with a dry cloth.

It is forbidden to use aggressive chemical cleaning agents or

solvents for cleaning.

6. Repair



INFORMATION!

Repairs may be carried out only by authorized workshops.

7. Technical data

≤ 24 V

≤ 25 mA

≤ 0.25 W

= 0 F

= 0 H

Table 2 | Te hni al data

Honeywell

73024353

English

8. Ambient conditions

Ambient temperature

40°C to

+70°C

Storage temperature

40°C to +70°C

Humidity

0 to 80% RH

Max. height above sea level

2000 m

Outdoor installation

Yes

Me hani al environments

Installation ategory a ording to

CAN/CSA

Table 3 | Ambient onditions

9. Approvals

Approval:

pproval number:

Approval body:

CSA

CSA 17CA70097478

CSA Group | 178 Rexdale Boulevard

Toronto, ON M9W 1R3

ATEX



II 2G Ex ia IIC T4 Gb



II 2G Ex ib IIC T4 Gb

TÜV 16 ATEX 7729 X

TÜV Rheinland Industrieservi e GmbH

Am Grauen Stein | 51105 Köln | Germany

IECEx

Ex ia IIC T4 Gb

Ex ib IIC T4 Gb

IECEx TUR 16.0032X

TÜV Rheinland Industrieservi e GmbH

Am Grauen Stein | 51105 Köln | Germany

Table 4 | Approvals

ATEX/IECEx legend:

 Marking of explosion prote tion

II Equipment group: industrial (mining ex luded)

2 Equipment ategory 2 (Zone 1)

G Potentially explosive gas atmospheres

ia/ib Type of ignition prote tion: intrinsi ally safe

IIC Explosion group for gases

T4 Temperature lass

Gb Equipment prote tion level

Honeywell

10. Annex A – Standards and orms

The pulse generators meet the following norms and standards or the

relevant hapters within them*.

2014/32/EU

–

Annex

IV (MI

001),

Annex VII (MI-005) Measuring Instruments Dire tive (MID)

DIN EN 12480:

2015

Gas meters

–

otary

displa ement

gas meters

DIN EN 12261:2002 +

A1:2006

Gas

meters

–

urbine gas meters

DIN EN 60079

0:2012

+ A11:2013

IEC 60079-0:2011

CAN/CSA-C22.2 NO. 60079-0:15

Explosive atmospheres – Part 0: Equipment –

General requirements

DIN EN 60079

11:2012

IEC 60079-11:2011

CAN/CSA-C22.2 NO. 60079-11:14

Explosive atmospheres

Part 11: Equipment prote tion by intrinsi safety

“i”

CAN/CSA

C22.2 NO. 0

General requirements

–

Canadian ele tri al ode,

part II

CAN/CSA

C22.2 NO. 61010

Safety requirements for ele tri al

equipment for measurement, ontrol and

laboratory use – Part 1: General requirements –

Third edition

* Standards valid at the time of the operating instru tions going to press.

Honeywell

73024353

English

This manual suits for next models

Table of contents

Languages:

Popular Pulse Generator manuals by other brands

Agilent Technologies

Agilent Technologies 81101A reference guide

HP 8112A Operating, programming and servicing manual

BNC

BNC DB-2 user manual

Avtech

Avtech AVL-2A-W-B instructions

AimTTi

AimTTi TGP110 instruction manual

BNC

BNC 577 operating manual

SEFRAM

SEFRAM 4451 operating manual

Honeywell IN-S Series User manual

Popular Pulse Generator manuals by other brands