Honeywell Lutron LR-HWLV-HVAC TouchPRO Wireless User manual

Operating Manual
LR-HWLV-HVAC TouchPRO Wireless™
Touchscreen Thermostat
69-2656EFS-03

Read and save these instructions.
® U.S. Registered Trademark.
Copyright © 2012 Honeywell International Inc. All rights reserved.
BE CAREFUL! Never use sharp instruments, such as a pencil or pen,
to press touchscreen keys. To prevent damage to the thermostat,
always press keys with your fingertip.
This thermostat contains a Lithium battery which may contain
Perchlorate material.
Perchlorate Material—special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate
M32584
Technical Assistance | 24 hours a day, 7 days a week | www.lutron.com
U.S.A. / Canada: 1.800.523.9466 | Mexico: +1.888.235.2910
Other Countries: +1.610.282.3800
Warranty: For warranty information, please see the Warranty enclosed with the
product, or visit www.lutron.com/resiinfo

TouchPRO Wireless™
P/N 041-339 Rev. B 1 69-2656EFS—03
Table of Contents
About Your New Thermostat
Thermostat Features.......................................2
Quick Reference to Controls ..........................4
Quick Reference to Status Display ................5
Programming & Operation
Fan Settings.....................................................6
System Settings .............................................. 7
Program Schedule Override (Temp) ............... 8
Special Features.............................................. 9
Screen Lock................................................... 10
Screen Cleaning ............................................11
Appendicies
Battery Replacement .................................... 12
Advanced Functions ..................................... 13
Troubleshooting.............................................16
Note: To prevent possible compressor
damage, do not operate cooling system when
outdoor temperature is below 50 ˚F (10 ˚C).

Operating Manual
P/N 041-339 Rev. B 2 69-2656EFS—03
TouchPRO Wireless Thermostat Features
Congratulations! You’ve just purchased the world’s most advanced, easy-to-use
thermostat. It has been designed to give you many years of reliable service and
touchscreen climate control.
Features
• One-touch temp control overrides program schedule at any time.
• Precise comfort control keeps temperature within 1 °F (0.5 °C) of the level you set.
• Large touchscreen display with backlight is easy to read—even in the dark.

TouchPRO Wireless™
P/N 041-339 Rev. B 3 69-2656EFS—03
This thermostat is ready to go!
Your new thermostat is ready to go. Just check the settings below and change if
needed:
1. Select fan setting: Preset to Auto..............................................................See page 6
2. Select system setting: Preset to Heat ......................................................See page 7

Operating Manual
P/N 041-339 Rev. B 4 69-2656EFS—03
TouchPRO Wireless FeaturesQuick Reference to Controls
M32575
PM
MORE
Press to select fan
operation
Press to select system
type
Press to adjust
temperature settings
Press to view
wireless connection
screen. The MORE
button only appears
when the thermostat
is not addressed to
the Lutron®system.
Press to lock keypad
for 30 seconds to clean
screen

TouchPRO Wireless™
P/N 041-339 Rev. B 5 69-2656EFS—03
M33048
MORE
PM
Current inside temperature Temperature setting
Fan setting
Other display messages:
• Cool ON: Cooling system is activated
• Heat ON: Heating system is activated
• Aux Heat ON: Auxiliary heating system is activated
Quick Reference to Status Display
System setting
Current time

Operating Manual
P/N 041-339 Rev. B 6 69-2656EFS—03
TouchPRO Wireless FeaturesFan Settings
Press FAN to select fan operation, then
press DONE.
• ON: Fan is always on.
• Auto: Fan runs only when the heating
or cooling system is ON.
You can press FAN to override the fan
settings for different time periods. If
you select ON, the setting you select
remains active until you press FAN again
to select Auto.
M32999
MORE
AM
Note: This thermostat does not
support a fan schedule.
Fan Settings

TouchPRO Wireless™
P/N 041-339 Rev. B 7 69-2656EFS—03
System Settings
M33000
MORE
AM
Press the SYSTEM button to select one
of the following, then press DONE.
• Heat: Thermostat controls only the
heating system.
• Cool: Thermostat controls only the
cooling system.
• Off: Heating and cooling systems
are OFF.
• Auto: Thermostat automatically
selects heating or cooling
depending on the indoor
temperature.
• Em Heat (only for heat pumps with
auxiliary heat): Thermostat controls
Emergency and Auxiliary Heat. Press SYSTEM

Operating Manual
P/N 041-339 Rev. B 8 69-2656EFS—03
Program Schedule Override (Temporary)
Press s or t to immediately adjust the
temperature. This temporarily overrides the
temperature setting for the current time
period.
The new temperature is maintained only until
the next programmed time period begins
(please refer to the Lutron System Program
for program schedule). For example, if you
want to turn up the heat early in the morning,
it will automatically be lowered later, when you
leave for the day.
Adjust temperature
M33001
AM
HEAT
MORE

TouchPRO Wireless™
P/N 041-339 Rev. B 9 69-2656EFS—03
Special Features
Auto Changeover: When set to Auto, the thermostat automatically selects heating
or cooling depending on the indoor temperature.
Compressor Protection: This feature forces the compressor to wait a few minutes
before restarting, to prevent equipment damage. During the wait time, the message
“Wait” is displayed on screen.

Operating Manual
P/N 041-339 Rev. B 10 69-2656EFS—03
Screen Lock
To prevent tampering, the screen can be
partially or fully locked.
When partially locked, the screen displays
SCREEN LOCKED for several seconds if a
locked key is pressed. To unlock the screen,
press any unlocked key while SCREEN LOCKED
appears on the screen.
When the screen is fully locked, no keys
function. To lock or unlock the screen, see
advanced function 0670 on page 15.
See advanced function
0670 (page 15) for
screen lock options
M32583
USAGE
PM
SCREEN LOCKED
HEAT

TouchPRO Wireless™
P/N 041-339 Rev. B 11 69-2656EFS—03
Screen Cleaning
Press SCREEN to go to the cleaning screen.
Press SCREEN to lock the screen for cleaning.
The screen remains locked for 30 seconds so
you can clean the screen without disturbing
any settings.
After 30 seconds, press DONE to resume normal
operation, or press OK if you require more time
for cleaning.
Note: Do not spray any liquid directly on the
thermostat. Spray liquids onto a cloth, then use
the damp cloth to clean the screen. Use water or
household glass cleaner. Avoid abrasive cleansers.
Press SCREEN
Screen lock timer (30 seconds)
M33007
SCREEN
PM
6:00

Operating Manual
P/N 041-339 Rev. B 12 69-2656EFS—03
TouchPRO Wireless FeaturesBattery Replacement
The TouchPRO Wireless thermostat has
a coin cell battery that retains the time
and date during a power failure. Under
normal circumstances the coin cell
should last five years. Should the time
and date need to be reset after a power
failure, this is an indication that the coin
cell needs to be replaced. You should
replace the battery every five years, or
before leaving home for an extended
period.
The TouchPRO Wireless thermostat is shipped from the factory with the coin cell installed.
To keep the battery from discharging during shipment and storage, the TouchPRO Wireless
thermostat is shipped from the factory with a plastic tab inserted in the battery holder. This
tab must be removed before the thermostat is mounted on the wall. Simply pull the plastic tab
out of the thermostat. To replace the battery, remove the battery tray using a screw driver.
Place a new coin cell (type CR2032 or equivalent) observing the correct polarity and push the
battery tray into the battery cover assembly.
Coin cell
battery tray
Battery Replacement

TouchPRO Wireless™
P/N 041-339 Rev. B 13 69-2656EFS—03
Advanced Functions
2. Press and hold
blank center key
until the display
changes.
1. Press SYSTEM.
Press s/t to
select function
Function Setting
Press s/t to
change setting
SUN
SYSTEM
HEAT
M33008
M33009
DONE
0280
0
DONE CANCEL
AM
6:01
HEAT
SUN
M32755
3. Change settings as
required.
4. Press DONE to exit &
save changes.

Operating Manual
P/N 041-339 Rev. B 14 69-2656EFS—03
Advanced Functions
Backlight Settings
Function 0280 Press s/t to change the backlight settings:
Options: 0 Backlight ON for approx. 45 seconds after keypress
1 Backlight always on low intensity, with full brightness after keypress
Temperature format (°F/°C)
Function 0320 Press s/t to set the temperature display format:
Options: 0 Fahrenheit
1 Celsius
Furnace Filter Change Reminder
Function 0500 Press s/t to change the furnace filter change reminder:
Options: 0 Disabled
1 10 R.T. Day
2 30 R.T. Day
3 60 R.T. Day
4 90 R.T. Day
5 120 R.T. Day
6 180 R.T. Day
7 270 R.T. Day
8 365 R.T. Day
9 30 C Days
10 60 C Days
11 90 C Days
12 120 C Days
13 180 C Days
14 365 C Days

TouchPRO Wireless™
P/N 041-339 Rev. B 15 69-2656EFS—03
Advanced Functions
Humidifier Pad Replacement Reminder
Function 0510 Press s/t to set the humidifier pad replacement reminder:
Options: 0 Disabled
1 90 C Days, 30 R.T. Days
2 180 C Days, 60 R.T. Days
3 365 C Days, 90 R.T. Days
UV Lamp Replacement Reminder
Function 0520 Press s/t to set the UV lamp replacement reminder:
Options: 0 Disabled
1 365 Days
2 730 Days (2 years)
Clock format
Function 0640 Press s/t to choose a clock format:
Options: 12 12-hour time (i.e., “3:30 pm”)
24 24-hour time (i.e., “15:30”)
Screen lock
Function 0670 Press s/t to choose a screen lock setting (see page 10):
Options: 0 Screen is unlocked (fully functional)
1 All functions locked except temperature controls and CANCEL key
2 Screen is fully locked

Operating Manual
P/N 041-339 Rev. B 16 69-2656EFS—03
Troubleshooting
If you have difficulty with your thermostat, please try the following.
Most problems can be corrected quickly and easily.
Display is blank • Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is ON.
• Make sure furnace door is closed securely.
No response to
key presses (or
temperature
does not
change)
• Check to make sure the thermostat is not locked (see page 10).
• Make sure heating and cooling temperatures are set to acceptable ranges:
Heat: 40 °F to 90 °F (4.5 °C to 32.0 °C)
Cool: 50 °F to 99 °F (10.0 °C to 37.0 °C)
Backlight is dim • A dim display is normal. The backlight remains ON at a low level, and
brightens when a key is pressed.

TouchPRO Wireless™
P/N 041-339 Rev. B 17 69-2656EFS—03
Troubleshooting
Heating or
cooling system
does not respond
• Press SYSTEM to set system to Heat. Make sure the temperature is set
higher than the Inside temperature.
• Press SYSTEM to set system to Cool. Make sure the temperature is set
lower than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is ON.
• Make sure furnace door is closed securely.
• If “Wait” is displayed, the compressor protection timer is ON. Wait
5 minutes for the system to restart safely, without damaging the
compressor.

© 2012 Honeywell International Inc
69-2656EFS—03 M.S. Rev. 03-12
P/N 041-339 Rev. B
Printed in U.S.A.
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
http://yourhome.honeywell.com
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
USA
TEL: [phone]
FAX: [phone]
www.lutron.com