Honeywell VisionPRO Series User manual

VisionPRO®Series
with RedLINK™
User Guide
TM

Welcome
Congratulations on your purchase of a
Honeywell touch screen programmable
thermostat. When used with the optional
RedLINK Internet Gateway, you can remotely
monitor and control the heating and cooling
system in your home or business—you
can stay connected to your comfort system
wherever you go.
Honeywell’s Total Connect Comfort is the
perfect solution if you travel frequently, own
a vacation home, a business or manage
an investment property or if you are simply
looking for peace of mind.

169-2761EFS—03
Features of your VisionPRO thermostat
With your new thermostat, you can:
• Connect to the internet to monitor and control your heating/cooling system
and receive alerts by email (requires optional RedLINK Internet Gateway)
• View outdoor temperature and humidity (requires optional Wireless
Outdoor Sensor)
• Control humidification, dehumidifcation or ventilation (TH8321 model)
Your new thermostat also provides:
• Adaptive Intelligent Recovery—over time, the VisionPRO thermostat
“learns” how long it takes your system to reach the temperature you
want. It turns on the heating or cooling system earlier to make sure you’re
comfortable at the time you expect.
• Dealer information on the screen—making it easy for you to contact your
dealer for service.
• Vacation and holiday scheduling—allowing you to program a setback
temperature to save energy while you are away.
• Keypad lockout to prevent unauthorized changes.
• Equipment status—provides on/off status of all equipment controlled by
the thermostat.
• Preferences—allowing you to customize the thermostat to your desired
settings.

69-2761EFS—03 2
Programming and Operation
Quick reference...........................................3
Setting the time/date................................... 5
Setting the fan.............................................6
Setting system mode ..................................7
Preset energy-saving schedules.................8
Adjusting program schedules......................9
Schedule overrides ...................................11
Menu Options
Viewing equipment status.........................13
Setting vacation, holiday, and events........14
Setting holiday/event schedules:
commercial use.........................................15
Setting humidification and
dehumidification ........................................21
Setting ventilation...................................... 24
Setting preferences...................................26
Cleaning the thermostat screen................27
Security settings........................................28
Viewing dealer information........................29
Advanced features ....................................30
Appendices
Installer options.........................................31
Replacing batteries ...................................32
Temperature and humidity display ............35
Optional accessories.................................37
Troubleshooting.........................................39
Regulatory information..............................41
Table of contents

369-2761EFS—03
Quick reference: residential use
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here to set
a program schedule.
Current status. Shows system mode (heat/
cool), outdoor temperature and humidity (with
optional outdoor sensor).
Current schedule. Touch an arrow to change
temperature setting and select a Temporary or
Permanent Hold.
Indoor conditions. Shows indoor temperature
and humidity.
Current time. Touch to set the current time/date.
Alert Light. On when alert message is
active or system is set to EmHeat. Flashes
for battery-only power; on continuous if
system powered.
The screen lights when you
press any button. It stays lit for
7 seconds after you complete
changes. Depending on how your
thermostat was installed, the
screen light may always be on.

69-2761EFS—03 4
Quick reference: commercial use
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here to set a
program schedule.
Current status. Shows system mode (heat/cool),
outdoor temperature and humidity (with optional
outdoor sensor).
Override. Touch to override program schedule.
Current schedule. Touch an arrow to change
temperature setting and set a temporary hold.
Current program status.
Indoor conditions. Shows indoor temperature and
humidity.
Current time. Touch to set the current time/date.
Alert Light. On when alert message is active
or system is set to EmHeat. Flashes for battery-
only power; on continuous if system powered.
Micro SD Card port. Use card to load holiday
schedules and custom events.
The screen lights when you
press any button. It stays
lit for 7 seconds after you
complete changes. Depending
on how your thermostat was
installed, the screen light may
always be on.

569-2761EFS—03
Setting the time/date
1 Touch the current time. The screen
displays Select Option.
2 Touch Time or Date, then touch Select.
3 Touch sor t until the proper time/date
is displayed.
4 Touch Done to save or Cancel to ignore
changes.
5 Touch Home to redisplay the Home
screen.
NOTE: The date is not shown on the
home screen; however, it should be set
to allow the thermostat to adjust time
automatically for daylight saving time and
for other features such as vacation hold.
MCR34092
MCR34155
Select Option
Time Date
MCR34094
Please Set Time
6:30 PM

69-2761EFS—03 6
Setting the fan
1 Touch FAN to display fan settings.
2 Touch On, Auto, Circ, or Follow Schedule.
3 Touch Done to save and exit.
On: Fan is always on.
Auto: Fan runs only when the heating
or cooling system is on.
Circ: Fan runs randomly about 35% of
the time (residential use only).
Follow Schedule: Fan controlled by
program (see pages
8 – 12 ).
NOTE: In commercial use,
touch Auto or On to temporarily
override the programmed fan
schedule.
MCR34096
MCR34097
On Auto Circ

769-2761EFS—03
Setting system mode
1 Touch SYSTEM to display system
settings.
2 Touch desired option:
Heat: Controls only the heating
system.
Cool: Controls only the cooling
system.
Off: Heating/cooling systems are off.
Auto: Selects heating or cooling
depending on the indoor temperature.
Em Heat (heat pumps with aux.
heat): Controls auxiliary/emergency
heat. Compressor is locked out.
3 Touch Done to save and exit.
NOTE: The Auto and Em
Heat system settings may not
appear, depending on how your
thermostat was installed.
MCR34099
Heat Cool Auto
Off
MCR34098

69-2761EFS—03 8
Preset energy-saving schedules
This thermostat uses default Energy Saver settings that can reduce your heating/cooling
expenses. To customize settings, see next page.
Wake 6:00 am 70° 78° 70° 78°
Leave 8:00 am 62° 85° 62° 85°
Return 6:00 pm 70° 78° 70° 78°
Sleep 10:00 pm 62° 82° 62° 82°
Cool
(Mon-Fri)Start time
Heat
(Mon-Fri)Period
Heat
(Sat-Sun)
Cool
(Sat-Sun)
Residential Use
Occupied 1 8:00 am 70° 75° On
Unoccupied 1 10:00 pm 55° 85° Auto
Occupied 2* 12:00 am 70° 75° On
Unoccupied 2* 12:00 am 55° 85° Auto
CoolStart time HeatPeriod Fan
Commercial Use
* Period 2 is cancelled by default. If you activate it, the values shown above are
default settings.