Press the switch button 1 to turn on the power light and
play the background sound to be the standby time. Then
press the switch button again to turn on the power, turn
on the light and current sound, and press the switch
button for 5 seconds to turn off. After power off, the
power light will be on for 60 seconds, and it will be in
standby. After 60 seconds, the power will be cut off auto-
matically.
In standby time, the machine can be switched on and off
by hand with reciprocating rotation.
Press the switch button 6 times quickly to force the shut-
down.
When the lightsaber collides, it will emit flash and
sound.
In standby state, shake the hilt quickly to switch on.
In power-on state, shake the hilt quickly to switch off.
In power-on state, click the button and shake the hilt
quickly to switch the sound (don’t release the button).
Press the switch button 3 times quickly to be the mode
of stepless color change, and the color will gradually
change in cycles. Click the switch button to lock the
desired light color.
Press the switch button 3 times again to be the auto-
matic color changing mode, and multiple colors will
automatically cycle on. Click the switch button to lock
the desired color.
Press the switch button 3 times again to be the flame
mode and the light will flash continuously; click the
button to exit flame mode
The three modes appear in turn.
When the battery is low, a low battery prompt will be
given, the charging line will be correctly inserted into the
charging port, the button aperture breathing will light
up, indicating that the battery is charging, and the
button aperture will go out, indicating that the battery is
fully charged.
The last color you selected will be remembered after the
lightsaber is turned off.
The lightsaber can not be started or
automatically shut down
Please check whether the battery is out of power, and
try again after it is fully charged.
The light is not on when the lightsaber sword
is charged or cannot be charged
Please check whether the charger is 5V1A/5V2A.
Charging with other models will lead to chip burning!
The lightsaber has no sound
Please check whether it is in silent mode.
The lightsaber blade flashes frequently
Please switch the mode and try again
In standby time, press the switch button 3 times quickly
to adjust the volume, and play the background sound
100% -60% - 30% in turn. When power on, press the
switch button 4 quickly to be mute, and repeat the oper-
ation to recover. (Except for key sound).
In standby time, you can double click the button to
switch the sound effect.
When power on, you can double click the button to
switch colors.
Press switch button for 1 second and release it to be the
Lightsaber Versus Mode. The light of the sword flashes
continuously and makes a cracking sound. Press the
switch button to exit the Lightsaber Versus Mode.
The product is a LED luminous toy, so your eyesight
will be affected if looking at it directly for a long time!
Recommended age: children over 6 years old,
violence is forbidden!
Please use the included USB charging cable, use
5V/2A charger or computer USB port to charge
ONLY!
There are fine parts inside the handle, disassembly is
prohibited!
There is a built-in rechargeable lithium battery, it is
forbidden to contact with water!
Startup/Shutdown
OPERATION GUIDELINES TROUBLESHOOTING
WARNING!!!
FOC Function
Memory Function
Charge Indication
Gesture Control
3 Color-changing Modes
Volume Adjustment (Including Mute)
12 Types of Sound Effects
15 Color Options
Lightsaber Versus Mode
Stepless Color Changing Mode
Automatic Color Changing Mode
Flame Mode.
1
2
3
CAUTION !
This product contains small parts such as screws that
may cause suffocation if swallowed by children
