Hooker Furniture 5272-75906 User manual

1/2
ASSEMBLY INSTRUCTION
(for connecting the wire of the light on this Cabinet)
Item#: 5272-75906 Two-Door Display Cabinet
*** Caution: Please read all instructions carefully before starting the assembly process.
Diagram 1 Diagram 2
Assembly steps:
1. Place cabinet at a desired location and plug in male connector(A). Touch dimmer is located at right
side of door hinge. (see diagram 1)
Touch Dimmer

2/2
2. In case of two or more cabinets together, leave male connector of the can light (C) and female
connector of power switch (B) for the first cabinet (#1) as it is. Keep male connector of the can light
(C) and female connector of power switch (B) off for the rest cabinets( #2, #3, and so on). (See
diagram 2)
Diagram 3
3. Connect female connector of the can light (D) (#1 cabinet) with male connector of the can light (C).
Repeat this step for 2nd cabinet and the rests when more than two are bunched together till each
one is connected.(See diagram 3)
4. Plug in male connector of power switch (A) (#1 cabinet).
5. Touch the dimmer of the #1 cabinet, all can lights connecting together will be on at the same time.
Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp
cloth. Polish the finish with soft cloth and an industry recognized furniture polish.